深度学习环境配置 ubuntu安装CUDA10.2失败！

按照网上教程安装CUDA10.1 或 CUDA10.2时候，即执行官方的命令的时候

root@6c000e89a184:~# sh cuda_10.2.89_440.33.01_linux.run

执行完这条命令后，直接提示了安装错误。查看log

[INFO]: File does not exist, skipping: /usr/local/cuda-10.2/share/gdb/python/gdb/printer/bound_registers.py
[INFO]: Uninstall entry: file /usr/local/cuda-10.2/share/gdb/python/gdb/prompt.py 5153cbe67243ff2090be1ba7c3a76d5a
[INFO]: File does not exist, skipping: /usr/local/cuda-10.2/share/gdb/python/gdb/prompt.py
[INFO]: Uninstall entry: file /usr/local/cuda-10.2/share/gdb/python/gdb/frames.py 47f741a775fb5c97a4f9af9cc0f9bd3d
[INFO]: File does not exist, skipping: /usr/local/cuda-10.2/share/gdb/python/gdb/frames.py
[INFO]: Uninstall entry: file /usr/local/cuda-10.2/share/gdb/python/gdb/xmethod.py f384593dfaf26f714f95a01060bb8b53
[INFO]: File does not exist, skipping: /usr/local/cuda-10.2/share/gdb/python/gdb/xmethod.py
[INFO]: Uninstall entry: dir /usr/local/cuda-10.2/share/gdb/python/gdb/command/
[INFO]: Uninstall entry: file /usr/local/cuda-10.2/share/gdb/python/gdb/command/__init__.py ffc0751143f05f8dd89c1c8530545af1
[INFO]: File does not exist, skipping: /usr/local/cuda-10.2/share/gdb/python/gdb/command/__init__.py

经过查阅资料，发现在sh xx.run后面加入路径即可正常安装，命令如下

sh XX.linux.run --silent --toolkit --samples --librarypath=/usr/local/cuda

#比如是CUDA10.2   则输入
root@6c000e89a184:~# sh cuda_10.2.89_440.33.01_linux.run --silent --toolkit --samples --librarypath=/usr/local/cuda-10.2
# linux # python # ubuntu # centos # docker
Logo
Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具；    1.1 mii-tool 介绍；    mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

avatar Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

avatar Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

<br />　　Linux系统下超级终端Minicom的使用方法 <br />　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： <br />　　1． 启动minicom <br />　　以root权限登录系统 <br />　　使用命令 <br />　　minicom –s 则minicom启动，屏

avatar Linux