
简介
该用户还未填写简介
擅长的技术栈
可提供的服务
暂无可提供的服务
imx6ull 驱动开发环境搭建
一、前言rt_components_board_init被rt_hw_board_init调用。#ifdef RT_USING_COMPONENTS_INITrt_components_board_init();#endif二、rt_components_board_init函数分析#define RT_DEBUG_INIT 0/*** RT-Thread Components Initializ
https://blog.csdn.net/weixin_43914604/article/details/104722679
一、安装软件sudo apt-get install nfs-kernel-server rpcbind二、创建nfs目录mkdir nfs三、配置nfs服务器配置文件位置:/etc/exports。在 exports 文件中添加以下语句:/home/onlylove/My/nfs *(rw,sync,no_root_squash)四、重启NFS服务器sudo /etc/init.d/nfs-ke
一、第一种方法使用 apt-get install qemu 命令进行安装,安装过程如下:onlylove@ubuntu:~$ sudo apt-get install qemuReading package lists... DoneBuilding dependency treeReading state information... DoneThe following NEW package
搭建 risc-v 编译环境
详细内容见《STM32F10xxx中文参考手册》21 USB全速设备接口(USB) 章节、《STM32F10x参考手册(英文)》 23 Universal serial bus full-speed device interface (USB)和《STM32 USB 开发者培训》资料。本章节只概要描述。一、USB简介USB外设实现了USB2.0全速总线和APB1总线间的接口。USB外设支持USB挂
https://blog.csdn.net/asher__zhou/article/details/105519209https://blog.csdn.net/zcshoucsdn/article/details/78936456本章摘取《STM32 USB-FS-Device development kit》文档。一、概述STM32 USB-FS-Device开发套件是一个完整的固件和软件包,







