redis设置防火墙的问题

Linux 下载安装配置Redis完整步骤安装：1.获取redis资源　　wget http://download.redis.io/releases/redis-4.0.8.tar.gz2.解压　　tar xzvf redis-4.0.8.tar.gz3.安装　　cd redis-4.0.8　　make　　cd src　　make ...

weixin_30707875

3099人浏览 · 2019-03-06 17:15:00

weixin_30707875 · 2019-03-06 17:15:00 发布

Linux 下载安装配置Redis完整步骤

安装：

1.获取redis资源

　　wget http://download.redis.io/releases/redis-4.0.8.tar.gz

2.解压

　　tar xzvf redis-4.0.8.tar.gz

3.安装

　　cd redis-4.0.8

　　make

　　cd src

　　make install PREFIX=/usr/local/redis

4.移动配置文件到安装目录下

　　cd ../

　　mkdir /usr/local/redis/etc

　　mv redis.conf /usr/local/redis/etc

5.配置redis为后台启动

　　vi /usr/local/redis/etc/redis.conf //将daemonize no 改成daemonize yes

6.将redis加入到开机启动

　　vi /etc/rc.local //在里面添加内容：/usr/local/redis/bin/redis-server /usr/local/redis/etc/redis.conf (意思就是开机调用这段开启redis的命令)

7.开启redis

　　/usr/local/redis/bin/redis-server /usr/local/redis/etc/redis.conf

8.配置 redis-cli 环境

sudo vim /etc/profile

写入： export PATH=</usr/local/redis/bin/redis-cli>:$PATH

即可在任意路径下使用命令redis-cli 启动redis客户端

常用命令　　

　　redis-server /usr/local/redis/etc/redis.conf //启动redis

　　pkill redis //停止redis

　　卸载redis：

　　　　rm -rf /usr/local/redis //删除安装目录

　　　　rm -rf /usr/bin/redis-* //删除所有redis相关命令脚本

　　　　rm -rf /root/download/redis-4.0.4 //删除redis解压文件夹

来自：https://www.cnblogs.com/lauhp/p/8487029.html

查找防火墙的位置状态

[root@localhost demo]# systemctl status firewalld
● firewalld.service - firewalld - dynamic firewall daemon
   Loaded: loaded (/usr/lib/systemd/system/firewalld.service; enabled; vendor preset: enabled)
   Active: active (running) since 三 2019-03-06 00:56:15 PST; 2min 43s ago
     Docs: man:firewalld(1)
 Main PID: 630 (firewalld)
   CGroup: /system.slice/firewalld.service
           └─630 /usr/bin/python -Es /usr/sbin/firewalld --nofork --nopid

3月 06 00:56:14 localhost.localdomain systemd[1]: Starting firewalld - dynamic fir....
3月 06 00:56:15 localhost.localdomain systemd[1]: Started firewalld - dynamic fire....
Hint: Some lines were ellipsized, use -l to show in full.

关闭防火墙：

systemctl stop firewalld.service #停止firewall

systemctl disable firewalld.service #禁止firewall开机启动

systemctl start firewalld.service   #开启防火墙

如果你在redis中设置了密码想要修改不要密码可以使用

config set requirepass ""

当你设置了密码输入密码时都需要加上一个

auth admin    #admin是设置的密码

在防火墙中添加端口 6379

[root@localhost /]# firewall-cmd --zone=public --add-port=6379/tcp --permanent
Warning: ALREADY_ENABLED: 6379:tcp
success

然后重启防火墙

[root@localhost /]# firewall-cmd --reload
success

查询所有的开放的端口号

[root@localhost /]# firewall-cmd --list-port
6379/tcp

③查询linux本地Ip,执行ifconfig

[root@localhost /]# ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: ens33: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
    link/ether 00:0c:29:23:62:fe brd ff:ff:ff:ff:ff:ff
    inet 192.168.111.130/24 brd 192.168.111.255 scope global dynamic ens33
       valid_lft 1417sec preferred_lft 1417sec
    inet6 fe80::eb6e:fbad:27d5:9c4a/64 scope link 
       valid_lft forever preferred_lft forever
3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000
    link/ether 52:54:00:5c:36:38 brd ff:ff:ff:ff:ff:ff
    inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
       valid_lft forever preferred_lft forever
4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000
    link/ether 52:54:00:5c:36:38 brd ff:ff:ff:ff:ff:ff
[root@localhost /]#

但是，xinetd和telnet的服务都启动不了，telnet连服务名都不存在：

#systemctl status telnet.socket
如果显示inactive则表示没有打开请执行
# systemctl enable telnet.socket 加入开机启动
# systemctl start telnet.socket 启动Telnet服务
# systemctl status telnet.socket 再次查看服务状态

systemctl stop firewalld.service，使用这个停用防火墙，应该是这个问题，7使用的是Firewall防火墙

(https://www.cnblogs.com/gyrgyr/p/7954090.html)

[root@localhost ~]# systemctl status telnet.socket
● telnet.socket - Telnet Server Activation Socket
   Loaded: loaded (/usr/lib/systemd/system/telnet.socket; disabled; vendor preset: disabled)
   Active: inactive (dead)
     Docs: man:telnetd(8)
   Listen: [::]:23 (Stream)
 Accepted: 0; Connected: 0
[root@localhost ~]# systemctl start telnet.socket 
[root@localhost ~]# systemctl status telnet.cocket 
Unit telnet.cocket.service could not be found.
[root@localhost ~]# systemctl status telnet.socket
● telnet.socket - Telnet Server Activation Socket
   Loaded: loaded (/usr/lib/systemd/system/telnet.socket; disabled; vendor preset: disabled)
   Active: active (listening) since 日 2019-04-07 06:41:56 PDT; 28s ago
     Docs: man:telnetd(8)
   Listen: [::]:23 (Stream)
 Accepted: 0; Connected: 0

4月 07 06:41:56 localhost.localdomain systemd[1]: Listening on Telnet Server Activ....
4月 07 06:41:56 localhost.localdomain systemd[1]: Starting Telnet Server Activatio....
Hint: Some lines were ellipsized, use -l to show in full.
[root@localhost ~]# systemctl stop firewalld.service
[root@localhost ~]# ps -ef|grep redis
root       3496   3443  0 05:34 pts/0    00:00:05 redis-server *:6379
root       6832   4666  0 06:44 pts/1    00:00:00 grep --color=auto redis
[root@localhost ~]# telnet 127.0.0.1
Trying 127.0.0.1...
Connected to 127.0.0.1.
Escape character is '^]'.

Kernel 3.10.0-514.el7.x86_64 on an x86_64

[root@andy ~]# telnet 192.168.120.204
Trying 192.168.120.204...
Connected to 192.168.120.204 (192.168.120.204).
Escape character is '^]'.

    localhost (Linux release 2.6.18-274.18.1.el5 #1 SMP Thu Feb 9 12:45:44 EST 2012) (1)

login: root
Password: 
Login incorrect

一般情况下不允许root从远程登录，可以先用普通账号登录，然后再用su -切到root用户。

下载安装iptables

yum install iptables

启动 /bin/systemctl start iptables.service

关闭 /bin/systemctl start iptables.service

如果遇到问题（https://blog.csdn.net/c233728461/article/details/52679558）

报错Failed to start iptables.service: Unit iptables.service failed to load: No such file or directory.

或 Failed to start iptables.service: Unit not found.

[root@localhost ~]# firewall-cmd --zone=public --add-port=80/tcp --permanent 
success
[root@localhost ~]# firewall-cmd --zone=public --add-port=1000-2000/tcp --permanent 
success
[root@localhost ~]# firewall-cmd --reload
success
[root@localhost ~]# firewall-cmd --zone=public --query-port=80/tcp
yes
[root@localhost ~]# yum install iptables-services

设置开机启动： systemctl enable iptables

保存设置： service iptables save

开放某个端口在/etc/sysconfig/iptables里添加

-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 8080 -j ACCEPT

redis 设置密码

查询密码：

redis 127.0.0.1:6379> config get requirepass

因为初始没有密码，所以无需输入，即可连接服务。

redis-cli.exe -h 127.0.0.1 -p 6379

转载于:https://www.cnblogs.com/zhulina-917/p/10484524.html

Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具； 1.1 mii-tool 介绍； mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

Linux系统下超级终端Minicom的使用方法 　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： 　　1．启动minicom 　　以root权限登录系统 　　使用命令 　　minicom –s 则minicom启动，屏