参考教程1教程2

一:SpringBoot简介

目的:

简化Spring 应用的初始搭建以及开发过程

优势:

1,快速建立独立运行的Spring项目以及与主流框架集成

2,使用嵌入式的Servlet容器,应用无需打成war包

3,starters(启动器)自动依赖与版本控制

4,大量的自动配置,简化开发,也可以修改默认值

5,无需配置xml,无代码生成,开箱即用

5,准生成环境的运行时应用监控

6,与云技术的天然集成

二:微服务简介

详细参考

微服务是一种软件系统风格,将原本单体应用变为一系列的小型服务,通过HTTP方式进行互通,其中每个组件是可独立更换和升级的软件单元。

 

 三:SpringBoot的Hello,World

采用eclipse+jdk1.8+maven3.3

3.1创建Maven工程

3.2配置pom.xml

 1 <project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
 2   <modelVersion>4.0.0</modelVersion>
 3   <groupId>com.wu</groupId>
 4   <artifactId>SpringBoot_HelloWorld</artifactId>
 5   <version>0.0.1-SNAPSHOT</version>
 6   <!-- 添加父级依赖 -->
 7   <parent>
 8       <groupId>org.springframework.boot</groupId>
 9       <artifactId>spring-boot-starter-parent</artifactId>
10       <version>1.5.6.RELEASE</version>
11   </parent>
12   
13   <dependencies>
14   <!-- 添加SpringMVC和spring的依赖 -->
15   <dependency>
16     <groupId>org.springframework.boot</groupId>
17     <artifactId>spring-boot-starter-web</artifactId>
18     <version>1.5.6.RELEASE</version>
19   </dependency>
20   </dependencies>
21   
22   <build>
23       <plugins>
24           <plugin>
25               <groupId>org.apache.maven.plugins</groupId>
26             <artifactId>maven-compiler-plugin</artifactId>
27             <configuration>
28                 <source>1.8</source>
29                 <target>1.8</target>
30             </configuration>
31           </plugin>
32       </plugins>
33   </build>
34 </project>
pom.xml

配置完成后可以Alt+F5(Update Project)

3.3编写Controller类,并运行

 1 package com.wu.controller;
 2 
 3 import org.springframework.boot.SpringApplication;
 4 import org.springframework.boot.autoconfigure.EnableAutoConfiguration;
 5 import org.springframework.stereotype.Controller;
 6 import org.springframework.web.bind.annotation.RequestMapping;
 7 import org.springframework.web.bind.annotation.ResponseBody;
 8 
 9 @EnableAutoConfiguration//自动配置
10 @Controller
11 public class IndexController {
12     @RequestMapping("/")
13     @ResponseBody
14     public String helloWorld(){
15         
16         return "Hello,World!";
17     }
18     public static void main(String []args){
19         SpringApplication.run(IndexController.class, args);
20     }
21 }
IndexController.java

3.4查看效果

3.5@EnableAutoConfiguration注解

作用:启动自动配置,该注解会使SpringBoot根据项目依赖的jar包自动配置项目的配置项。例如:在pom.xml中添加spring-boot-starter-web的依赖,就会自动配置tomcat和SpringMVC。

@EnableAutoConfiguration(exclude={ })  可以关闭一些依赖的自动配置,{ }里填写相关自动配置的类的字节码,如:exclude={RedisAutoConfiguration.class}

四:配置全局文件application.properties或是application.yml

目的:

可以改变SpringBoot的默认配置

位置:

示例:

1 server.port=80
2 server.context-path=/wm
application.properties

重新启动会在控制台看到:

 

 详情默认配置如下:

   1 # ===================================================================
   2 # COMMON SPRING BOOT PROPERTIES
   3 #
   4 # This sample file is provided as a guideline. Do NOT copy it in its
   5 # entirety to your own application.               ^^^
   6 # ===================================================================
   7 
   8 
   9 # ----------------------------------------
  10 # CORE PROPERTIES
  11 # ----------------------------------------
  12 debug=false # Enable debug logs.
  13 trace=false # Enable trace logs.
  14 
  15 # LOGGING
  16 logging.config= # Location of the logging configuration file. For instance, `classpath:logback.xml` for Logback.
  17 logging.exception-conversion-word=%wEx # Conversion word used when logging exceptions.
  18 logging.file= # Log file name (for instance, `myapp.log`). Names can be an exact location or relative to the current directory.
  19 logging.file.max-history=0 # Maximum of archive log files to keep. Only supported with the default logback setup.
  20 logging.file.max-size=10MB # Maximum log file size. Only supported with the default logback setup.
  21 logging.level.*= # Log levels severity mapping. For instance, `logging.level.org.springframework=DEBUG`.
  22 logging.path= # Location of the log file. For instance, `/var/log`.
  23 logging.pattern.console= # Appender pattern for output to the console. Supported only with the default Logback setup.
  24 logging.pattern.dateformat=yyyy-MM-dd HH:mm:ss.SSS # Appender pattern for log date format. Supported only with the default Logback setup.
  25 logging.pattern.file= # Appender pattern for output to a file. Supported only with the default Logback setup.
  26 logging.pattern.level=%5p # Appender pattern for log level. Supported only with the default Logback setup.
  27 logging.register-shutdown-hook=false # Register a shutdown hook for the logging system when it is initialized.
  28 
  29 # AOP
  30 spring.aop.auto=true # Add @EnableAspectJAutoProxy.
  31 spring.aop.proxy-target-class=true # Whether subclass-based (CGLIB) proxies are to be created (true), as opposed to standard Java interface-based proxies (false).
  32 
  33 # IDENTITY (ContextIdApplicationContextInitializer)
  34 spring.application.name= # Application name.
  35 
  36 # ADMIN (SpringApplicationAdminJmxAutoConfiguration)
  37 spring.application.admin.enabled=false # Whether to enable admin features for the application.
  38 spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication # JMX name of the application admin MBean.
  39 
  40 # AUTO-CONFIGURATION
  41 spring.autoconfigure.exclude= # Auto-configuration classes to exclude.
  42 
  43 # BANNER
  44 spring.banner.charset=UTF-8 # Banner file encoding.
  45 spring.banner.location=classpath:banner.txt # Banner text resource location.
  46 spring.banner.image.location=classpath:banner.gif # Banner image file location (jpg or png can also be used).
  47 spring.banner.image.width=76 # Width of the banner image in chars.
  48 spring.banner.image.height= # Height of the banner image in chars (default based on image height).
  49 spring.banner.image.margin=2 # Left hand image margin in chars.
  50 spring.banner.image.invert=false # Whether images should be inverted for dark terminal themes.
  51 
  52 # SPRING CORE
  53 spring.beaninfo.ignore=true # Whether to skip search of BeanInfo classes.
  54 
  55 # SPRING CACHE (CacheProperties)
  56 spring.cache.cache-names= # Comma-separated list of cache names to create if supported by the underlying cache manager.
  57 spring.cache.caffeine.spec= # The spec to use to create caches. See CaffeineSpec for more details on the spec format.
  58 spring.cache.couchbase.expiration=0ms # Entry expiration. By default the entries never expire. Note that this value is ultimately converted to seconds.
  59 spring.cache.ehcache.config= # The location of the configuration file to use to initialize EhCache.
  60 spring.cache.infinispan.config= # The location of the configuration file to use to initialize Infinispan.
  61 spring.cache.jcache.config= # The location of the configuration file to use to initialize the cache manager.
  62 spring.cache.jcache.provider= # Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Needed only if more than one JSR-107 implementation is available on the classpath.
  63 spring.cache.redis.cache-null-values=true # Allow caching null values.
  64 spring.cache.redis.key-prefix= # Key prefix.
  65 spring.cache.redis.time-to-live=0ms # Entry expiration. By default the entries never expire.
  66 spring.cache.redis.use-key-prefix=true # Whether to use the key prefix when writing to Redis.
  67 spring.cache.type= # Cache type. By default, auto-detected according to the environment.
  68 
  69 # SPRING CONFIG - using environment property only (ConfigFileApplicationListener)
  70 spring.config.additional-location= # Config file locations used in addition to the defaults.
  71 spring.config.location= # Config file locations that replace the defaults.
  72 spring.config.name=application # Config file name.
  73 
  74 # HAZELCAST (HazelcastProperties)
  75 spring.hazelcast.config= # The location of the configuration file to use to initialize Hazelcast.
  76 
  77 # PROJECT INFORMATION (ProjectInfoProperties)
  78 spring.info.build.location=classpath:META-INF/build-info.properties # Location of the generated build-info.properties file.
  79 spring.info.git.location=classpath:git.properties # Location of the generated git.properties file.
  80 
  81 # JMX
  82 spring.jmx.default-domain= # JMX domain name.
  83 spring.jmx.enabled=true # Expose management beans to the JMX domain.
  84 spring.jmx.server=mbeanServer # MBeanServer bean name.
  85 
  86 # Email (MailProperties)
  87 spring.mail.default-encoding=UTF-8 # Default MimeMessage encoding.
  88 spring.mail.host= # SMTP server host. For instance, `smtp.example.com`.
  89 spring.mail.jndi-name= # Session JNDI name. When set, takes precedence over other Session settings.
  90 spring.mail.password= # Login password of the SMTP server.
  91 spring.mail.port= # SMTP server port.
  92 spring.mail.properties.*= # Additional JavaMail Session properties.
  93 spring.mail.protocol=smtp # Protocol used by the SMTP server.
  94 spring.mail.test-connection=false # Whether to test that the mail server is available on startup.
  95 spring.mail.username= # Login user of the SMTP server.
  96 
  97 # APPLICATION SETTINGS (SpringApplication)
  98 spring.main.banner-mode=console # Mode used to display the banner when the application runs.
  99 spring.main.sources= # Sources (class names, package names, or XML resource locations) to include in the ApplicationContext.
 100 spring.main.web-application-type= # Flag to explicitly request a specific type of web application. If not set, auto-detected based on the classpath.
 101 
 102 # FILE ENCODING (FileEncodingApplicationListener)
 103 spring.mandatory-file-encoding= # Expected character encoding the application must use.
 104 
 105 # INTERNATIONALIZATION (MessageSourceProperties)
 106 spring.messages.always-use-message-format=false # Whether to always apply the MessageFormat rules, parsing even messages without arguments.
 107 spring.messages.basename=messages # Comma-separated list of basenames (essentially a fully-qualified classpath location), each following the ResourceBundle convention with relaxed support for slash based locations.
 108 spring.messages.cache-duration= # Loaded resource bundle files cache duration. When not set, bundles are cached forever. If a duration suffix is not specified, seconds will be used.
 109 spring.messages.encoding=UTF-8 # Message bundles encoding.
 110 spring.messages.fallback-to-system-locale=true # Whether to fall back to the system Locale if no files for a specific Locale have been found.
 111 spring.messages.use-code-as-default-message=false # Whether to use the message code as the default message instead of throwing a "NoSuchMessageException". Recommended during development only.
 112 
 113 # OUTPUT
 114 spring.output.ansi.enabled=detect # Configures the ANSI output.
 115 
 116 # PID FILE (ApplicationPidFileWriter)
 117 spring.pid.fail-on-write-error= # Fails if ApplicationPidFileWriter is used but it cannot write the PID file.
 118 spring.pid.file= # Location of the PID file to write (if ApplicationPidFileWriter is used).
 119 
 120 # PROFILES
 121 spring.profiles.active= # Comma-separated list of active profiles. Can be overridden by a command line switch.
 122 spring.profiles.include= # Unconditionally activate the specified comma-separated list of profiles (or list of profiles if using YAML).
 123 
 124 # QUARTZ SCHEDULER (QuartzProperties)
 125 spring.quartz.jdbc.comment-prefix=-- # Prefix for single-line comments in SQL initialization scripts.
 126 spring.quartz.jdbc.initialize-schema=embedded # Database schema initialization mode.
 127 spring.quartz.jdbc.schema=classpath:org/quartz/impl/jdbcjobstore/tables_@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
 128 spring.quartz.job-store-type=memory # Quartz job store type.
 129 spring.quartz.properties.*= # Additional Quartz Scheduler properties.
 130 
 131 # REACTOR (ReactorCoreProperties)
 132 spring.reactor.stacktrace-mode.enabled=false # Whether Reactor should collect stacktrace information at runtime.
 133 
 134 # SENDGRID (SendGridAutoConfiguration)
 135 spring.sendgrid.api-key= # SendGrid API key.
 136 spring.sendgrid.proxy.host= # SendGrid proxy host.
 137 spring.sendgrid.proxy.port= # SendGrid proxy port.
 138 
 139 
 140 # ----------------------------------------
 141 # WEB PROPERTIES
 142 # ----------------------------------------
 143 
 144 # EMBEDDED SERVER CONFIGURATION (ServerProperties)
 145 server.address= # Network address to which the server should bind.
 146 server.compression.enabled=false # Whether response compression is enabled.
 147 server.compression.excluded-user-agents= # List of user-agents to exclude from compression.
 148 server.compression.mime-types=text/html,text/xml,text/plain,text/css,text/javascript,application/javascript # Comma-separated list of MIME types that should be compressed.
 149 server.compression.min-response-size=2048 # Minimum "Content-Length" value that is required for compression to be performed.
 150 server.connection-timeout= # Time that connectors wait for another HTTP request before closing the connection. When not set, the connector's container-specific default is used. Use a value of -1 to indicate no (that is, an infinite) timeout.
 151 server.error.include-exception=false # Include the "exception" attribute.
 152 server.error.include-stacktrace=never # When to include a "stacktrace" attribute.
 153 server.error.path=/error # Path of the error controller.
 154 server.error.whitelabel.enabled=true # Whether to enable the default error page displayed in browsers in case of a server error.
 155 server.http2.enabled=false # Whether to enable HTTP/2 support, if the current environment supports it.
 156 server.jetty.acceptors=-1 # Number of acceptor threads to use. When the value is -1, the default, the number of acceptors is derived from the operating environment.
 157 server.jetty.accesslog.append=false # Append to log.
 158 server.jetty.accesslog.date-format=dd/MMM/yyyy:HH:mm:ss Z # Timestamp format of the request log.
 159 server.jetty.accesslog.enabled=false # Enable access log.
 160 server.jetty.accesslog.extended-format=false # Enable extended NCSA format.
 161 server.jetty.accesslog.file-date-format= # Date format to place in log file name.
 162 server.jetty.accesslog.filename= # Log filename. If not specified, logs redirect to "System.err".
 163 server.jetty.accesslog.locale= # Locale of the request log.
 164 server.jetty.accesslog.log-cookies=false # Enable logging of the request cookies.
 165 server.jetty.accesslog.log-latency=false # Enable logging of request processing time.
 166 server.jetty.accesslog.log-server=false # Enable logging of the request hostname.
 167 server.jetty.accesslog.retention-period=31 # Number of days before rotated log files are deleted.
 168 server.jetty.accesslog.time-zone=GMT # Timezone of the request log.
 169 server.jetty.max-http-post-size=200000 # Maximum size in bytes of the HTTP post or put content.
 170 server.jetty.selectors=-1 # Number of selector threads to use. When the value is -1, the default, the number of selectors is derived from the operating environment.
 171 server.max-http-header-size=0 # Maximum size, in bytes, of the HTTP message header.
 172 server.port=8080 # Server HTTP port.
 173 server.server-header= # Value to use for the Server response header (if empty, no header is sent).
 174 server.use-forward-headers= # Whether X-Forwarded-* headers should be applied to the HttpRequest.
 175 server.servlet.context-parameters.*= # Servlet context init parameters.
 176 server.servlet.context-path= # Context path of the application.
 177 server.servlet.application-display-name=application # Display name of the application.
 178 server.servlet.jsp.class-name=org.apache.jasper.servlet.JspServlet # The class name of the JSP servlet.
 179 server.servlet.jsp.init-parameters.*= # Init parameters used to configure the JSP servlet.
 180 server.servlet.jsp.registered=true # Whether the JSP servlet is registered.
 181 server.servlet.path=/ # Path of the main dispatcher servlet.
 182 server.servlet.session.cookie.comment= # Comment for the session cookie.
 183 server.servlet.session.cookie.domain= # Domain for the session cookie.
 184 server.servlet.session.cookie.http-only= # "HttpOnly" flag for the session cookie.
 185 server.servlet.session.cookie.max-age= # Maximum age of the session cookie. If a duration suffix is not specified, seconds will be used.
 186 server.servlet.session.cookie.name= # Session cookie name.
 187 server.servlet.session.cookie.path= # Path of the session cookie.
 188 server.servlet.session.cookie.secure= # "Secure" flag for the session cookie.
 189 server.servlet.session.persistent=false # Whether to persist session data between restarts.
 190 server.servlet.session.store-dir= # Directory used to store session data.
 191 server.servlet.session.timeout= # Session timeout. If a duration suffix is not specified, seconds will be used.
 192 server.servlet.session.tracking-modes= # Session tracking modes (one or more of the following: "cookie", "url", "ssl").
 193 server.ssl.ciphers= # Supported SSL ciphers.
 194 server.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store.
 195 server.ssl.enabled= # Enable SSL support.
 196 server.ssl.enabled-protocols= # Enabled SSL protocols.
 197 server.ssl.key-alias= # Alias that identifies the key in the key store.
 198 server.ssl.key-password= # Password used to access the key in the key store.
 199 server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file).
 200 server.ssl.key-store-password= # Password used to access the key store.
 201 server.ssl.key-store-provider= # Provider for the key store.
 202 server.ssl.key-store-type= # Type of the key store.
 203 server.ssl.protocol=TLS # SSL protocol to use.
 204 server.ssl.trust-store= # Trust store that holds SSL certificates.
 205 server.ssl.trust-store-password= # Password used to access the trust store.
 206 server.ssl.trust-store-provider= # Provider for the trust store.
 207 server.ssl.trust-store-type= # Type of the trust store.
 208 server.tomcat.accept-count=100 # Maximum queue length for incoming connection requests when all possible request processing threads are in use.
 209 server.tomcat.accesslog.buffered=true # Whether to buffer output such that it is flushed only periodically.
 210 server.tomcat.accesslog.directory=logs # Directory in which log files are created. Can be absolute or relative to the Tomcat base dir.
 211 server.tomcat.accesslog.enabled=false # Enable access log.
 212 server.tomcat.accesslog.file-date-format=.yyyy-MM-dd # Date format to place in the log file name.
 213 server.tomcat.accesslog.pattern=common # Format pattern for access logs.
 214 server.tomcat.accesslog.prefix=access_log # Log file name prefix.
 215 server.tomcat.accesslog.rename-on-rotate=false # Whether to defer inclusion of the date stamp in the file name until rotate time.
 216 server.tomcat.accesslog.request-attributes-enabled=false # Set request attributes for the IP address, Hostname, protocol, and port used for the request.
 217 server.tomcat.accesslog.rotate=true # Whether to enable access log rotation.
 218 server.tomcat.accesslog.suffix=.log # Log file name suffix.
 219 server.tomcat.additional-tld-skip-patterns= # Comma-separated list of additional patterns that match jars to ignore for TLD scanning.
 220 server.tomcat.background-processor-delay=10 # Delay in seconds between the invocation of backgroundProcess methods.
 221 server.tomcat.basedir= # Tomcat base directory. If not specified, a temporary directory is used.
 222 server.tomcat.internal-proxies=10\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
 223         192\\.168\\.\\d{1,3}\\.\\d{1,3}|\\
 224         169\\.254\\.\\d{1,3}\\.\\d{1,3}|\\
 225         127\\.\\d{1,3}\\.\\d{1,3}\\.\\d{1,3}|\\
 226         172\\.1[6-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
 227         172\\.2[0-9]{1}\\.\\d{1,3}\\.\\d{1,3}|\\
 228         172\\.3[0-1]{1}\\.\\d{1,3}\\.\\d{1,3} # Regular expression matching trusted IP addresses.
 229 server.tomcat.max-connections=10000 # Maximum number of connections that the server will accept and process at any given time.
 230 server.tomcat.max-http-header-size=0 # Maximum size in bytes of the HTTP message header.
 231 server.tomcat.max-http-post-size=2097152 # Maximum size in bytes of the HTTP post content.
 232 server.tomcat.max-threads=200 # Maximum amount of worker threads.
 233 server.tomcat.min-spare-threads=10 # Minimum amount of worker threads.
 234 server.tomcat.port-header=X-Forwarded-Port # Name of the HTTP header used to override the original port value.
 235 server.tomcat.protocol-header= # Header that holds the incoming protocol, usually named "X-Forwarded-Proto".
 236 server.tomcat.protocol-header-https-value=https # Value of the protocol header indicating whether the incoming request uses SSL.
 237 server.tomcat.redirect-context-root=true # Whether requests to the context root should be redirected by appending a / to the path.
 238 server.tomcat.remote-ip-header= # Name of the HTTP header from which the remote IP is extracted. For instance, `X-FORWARDED-FOR`.
 239 server.tomcat.resource.cache-ttl= # Time-to-live of the static resource cache.
 240 server.tomcat.uri-encoding=UTF-8 # Character encoding to use to decode the URI.
 241 server.tomcat.use-relative-redirects= # Whether HTTP 1.1 and later location headers generated by a call to sendRedirect will use relative or absolute redirects.
 242 server.undertow.accesslog.dir= # Undertow access log directory.
 243 server.undertow.accesslog.enabled=false # Whether to enable the access log.
 244 server.undertow.accesslog.pattern=common # Format pattern for access logs.
 245 server.undertow.accesslog.prefix=access_log. # Log file name prefix.
 246 server.undertow.accesslog.rotate=true # Whether to enable access log rotation.
 247 server.undertow.accesslog.suffix=log # Log file name suffix.
 248 server.undertow.buffer-size= # Size of each buffer, in bytes.
 249 server.undertow.direct-buffers= # Allocate buffers outside the Java heap. The default is derived from the maximum amount of memory that is available to the JVM.
 250 server.undertow.eager-filter-init=true # Whether servlet filters should be initialized on startup.
 251 server.undertow.io-threads= # Number of I/O threads to create for the worker. The default is derived from the number of available processors.
 252 server.undertow.max-http-post-size=-1 # Maximum size in bytes of the HTTP post content. When the value is -1, the default, the size is unlimited.
 253 server.undertow.worker-threads= # Number of worker threads. The default is 8 times the number of I/O threads.
 254 
 255 # FREEMARKER (FreeMarkerProperties)
 256 spring.freemarker.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
 257 spring.freemarker.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
 258 spring.freemarker.cache=false # Whether to enable template caching.
 259 spring.freemarker.charset=UTF-8 # Template encoding.
 260 spring.freemarker.check-template-location=true # Whether to check that the templates location exists.
 261 spring.freemarker.content-type=text/html # Content-Type value.
 262 spring.freemarker.enabled=true # Whether to enable MVC view resolution for this technology.
 263 spring.freemarker.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
 264 spring.freemarker.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
 265 spring.freemarker.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
 266 spring.freemarker.prefer-file-system-access=true # Whether to prefer file system access for template loading. File system access enables hot detection of template changes.
 267 spring.freemarker.prefix= # Prefix that gets prepended to view names when building a URL.
 268 spring.freemarker.request-context-attribute= # Name of the RequestContext attribute for all views.
 269 spring.freemarker.settings.*= # Well-known FreeMarker keys which are passed to FreeMarker's Configuration.
 270 spring.freemarker.suffix=.ftl # Suffix that gets appended to view names when building a URL.
 271 spring.freemarker.template-loader-path=classpath:/templates/ # Comma-separated list of template paths.
 272 spring.freemarker.view-names= # White list of view names that can be resolved.
 273 
 274 # GROOVY TEMPLATES (GroovyTemplateProperties)
 275 spring.groovy.template.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
 276 spring.groovy.template.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
 277 spring.groovy.template.cache=false # Whether to enable template caching.
 278 spring.groovy.template.charset=UTF-8 # Template encoding.
 279 spring.groovy.template.check-template-location=true # Whether to check that the templates location exists.
 280 spring.groovy.template.configuration.*= # See GroovyMarkupConfigurer
 281 spring.groovy.template.content-type=text/html # Content-Type value.
 282 spring.groovy.template.enabled=true # Whether to enable MVC view resolution for this technology.
 283 spring.groovy.template.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
 284 spring.groovy.template.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
 285 spring.groovy.template.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
 286 spring.groovy.template.prefix= # Prefix that gets prepended to view names when building a URL.
 287 spring.groovy.template.request-context-attribute= # Name of the RequestContext attribute for all views.
 288 spring.groovy.template.resource-loader-path=classpath:/templates/ # Template path.
 289 spring.groovy.template.suffix=.tpl # Suffix that gets appended to view names when building a URL.
 290 spring.groovy.template.view-names= # White list of view names that can be resolved.
 291 
 292 # SPRING HATEOAS (HateoasProperties)
 293 spring.hateoas.use-hal-as-default-json-media-type=true # Whether application/hal+json responses should be sent to requests that accept application/json.
 294 
 295 # HTTP message conversion
 296 spring.http.converters.preferred-json-mapper= # Preferred JSON mapper to use for HTTP message conversion. By default, auto-detected according to the environment.
 297 
 298 # HTTP encoding (HttpEncodingProperties)
 299 spring.http.encoding.charset=UTF-8 # Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.
 300 spring.http.encoding.enabled=true # Whether to enable http encoding support.
 301 spring.http.encoding.force= # Whether to force the encoding to the configured charset on HTTP requests and responses.
 302 spring.http.encoding.force-request= # Whether to force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.
 303 spring.http.encoding.force-response= # Whether to force the encoding to the configured charset on HTTP responses.
 304 spring.http.encoding.mapping= # Locale in which to encode mapping.
 305 
 306 # MULTIPART (MultipartProperties)
 307 spring.servlet.multipart.enabled=true # Whether to enable support of multipart uploads.
 308 spring.servlet.multipart.file-size-threshold=0 # Threshold after which files are written to disk. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes, respectively.
 309 spring.servlet.multipart.location= # Intermediate location of uploaded files.
 310 spring.servlet.multipart.max-file-size=1MB # Max file size. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes, respectively.
 311 spring.servlet.multipart.max-request-size=10MB # Max request size. Values can use the suffixes "MB" or "KB" to indicate megabytes or kilobytes, respectively.
 312 spring.servlet.multipart.resolve-lazily=false # Whether to resolve the multipart request lazily at the time of file or parameter access.
 313 
 314 # JACKSON (JacksonProperties)
 315 spring.jackson.date-format= # Date format string or a fully-qualified date format class name. For instance, `yyyy-MM-dd HH:mm:ss`.
 316 spring.jackson.default-property-inclusion= # Controls the inclusion of properties during serialization. Configured with one of the values in Jackson's JsonInclude.Include enumeration.
 317 spring.jackson.deserialization.*= # Jackson on/off features that affect the way Java objects are deserialized.
 318 spring.jackson.generator.*= # Jackson on/off features for generators.
 319 spring.jackson.joda-date-time-format= # Joda date time format string. If not configured, "date-format" is used as a fallback if it is configured with a format string.
 320 spring.jackson.locale= # Locale used for formatting.
 321 spring.jackson.mapper.*= # Jackson general purpose on/off features.
 322 spring.jackson.parser.*= # Jackson on/off features for parsers.
 323 spring.jackson.property-naming-strategy= # One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.
 324 spring.jackson.serialization.*= # Jackson on/off features that affect the way Java objects are serialized.
 325 spring.jackson.time-zone= #  Time zone used when formatting dates. For instance, "America/Los_Angeles" or "GMT+10".
 326 
 327 # GSON (GsonProperties)
 328 spring.gson.date-format= # Format to use when serializing Date objects.
 329 spring.gson.disable-html-escaping= # Whether to disable the escaping of HTML characters such as '<', '>', etc.
 330 spring.gson.disable-inner-class-serialization= # Whether to exclude inner classes during serialization.
 331 spring.gson.enable-complex-map-key-serialization= # Whether to enable serialization of complex map keys (i.e. non-primitives).
 332 spring.gson.exclude-fields-without-expose-annotation= # Whether to exclude all fields from consideration for serialization or deserialization that do not have the "Expose" annotation.
 333 spring.gson.field-naming-policy= # Naming policy that should be applied to an object's field during serialization and deserialization.
 334 spring.gson.generate-non-executable-json= # Whether to generate non executable JSON by prefixing the output with some special text.
 335 spring.gson.lenient= # Whether to be lenient about parsing JSON that doesn't conform to RFC 4627.
 336 spring.gson.long-serialization-policy= # Serialization policy for Long and long types.
 337 spring.gson.pretty-printing= # Whether to output serialized JSON that fits in a page for pretty printing.
 338 spring.gson.serialize-nulls= # Whether to serialize null fields.
 339 
 340 # JERSEY (JerseyProperties)
 341 spring.jersey.application-path= # Path that serves as the base URI for the application. If specified, overrides the value of "@ApplicationPath".
 342 spring.jersey.filter.order=0 # Jersey filter chain order.
 343 spring.jersey.init.*= # Init parameters to pass to Jersey through the servlet or filter.
 344 spring.jersey.servlet.load-on-startup=-1 # Load on startup priority of the Jersey servlet.
 345 spring.jersey.type=servlet # Jersey integration type.
 346 
 347 # SPRING LDAP (LdapProperties)
 348 spring.ldap.anonymous-read-only=false # Whether read-only operations should use an anonymous environment.
 349 spring.ldap.base= # Base suffix from which all operations should originate.
 350 spring.ldap.base-environment.*= # LDAP specification settings.
 351 spring.ldap.password= # Login password of the server.
 352 spring.ldap.urls= # LDAP URLs of the server.
 353 spring.ldap.username= # Login username of the server.
 354 
 355 # EMBEDDED LDAP (EmbeddedLdapProperties)
 356 spring.ldap.embedded.base-dn= # List of base DNs.
 357 spring.ldap.embedded.credential.username= # Embedded LDAP username.
 358 spring.ldap.embedded.credential.password= # Embedded LDAP password.
 359 spring.ldap.embedded.ldif=classpath:schema.ldif # Schema (LDIF) script resource reference.
 360 spring.ldap.embedded.port=0 # Embedded LDAP port.
 361 spring.ldap.embedded.validation.enabled=true # Whether to enable LDAP schema validation.
 362 spring.ldap.embedded.validation.schema= # Path to the custom schema.
 363 
 364 # MUSTACHE TEMPLATES (MustacheAutoConfiguration)
 365 spring.mustache.allow-request-override=false # Whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.
 366 spring.mustache.allow-session-override=false # Whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.
 367 spring.mustache.cache=false # Whether to enable template caching.
 368 spring.mustache.charset=UTF-8 # Template encoding.
 369 spring.mustache.check-template-location=true # Whether to check that the templates location exists.
 370 spring.mustache.content-type=text/html # Content-Type value.
 371 spring.mustache.enabled=true # Whether to enable MVC view resolution for this technology.
 372 spring.mustache.expose-request-attributes=false # Whether all request attributes should be added to the model prior to merging with the template.
 373 spring.mustache.expose-session-attributes=false # Whether all HttpSession attributes should be added to the model prior to merging with the template.
 374 spring.mustache.expose-spring-macro-helpers=true # Whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".
 375 spring.mustache.prefix=classpath:/templates/ # Prefix to apply to template names.
 376 spring.mustache.request-context-attribute= # Name of the RequestContext attribute for all views.
 377 spring.mustache.suffix=.mustache # Suffix to apply to template names.
 378 spring.mustache.view-names= # White list of view names that can be resolved.
 379 
 380 # SPRING MVC (WebMvcProperties)
 381 spring.mvc.async.request-timeout= # Amount of time before asynchronous request handling times out.
 382 spring.mvc.contentnegotiation.favor-parameter=false # Whether a request parameter ("format" by default) should be used to determine the requested media type.
 383 spring.mvc.contentnegotiation.favor-path-extension=false # Whether the path extension in the URL path should be used to determine the requested media type.
 384 spring.mvc.contentnegotiation.media-types.*= # Map file extensions to media types for content negotiation. For instance, yml to text/yaml.
 385 spring.mvc.contentnegotiation.parameter-name= # Query parameter name to use when "favor-parameter" is enabled.
 386 spring.mvc.date-format= # Date format to use. For instance, `dd/MM/yyyy`.
 387 spring.mvc.dispatch-trace-request=false # Whether to dispatch TRACE requests to the FrameworkServlet doService method.
 388 spring.mvc.dispatch-options-request=true # Whether to dispatch OPTIONS requests to the FrameworkServlet doService method.
 389 spring.mvc.favicon.enabled=true # Whether to enable resolution of favicon.ico.
 390 spring.mvc.formcontent.putfilter.enabled=true # Whether to enable Spring's HttpPutFormContentFilter.
 391 spring.mvc.ignore-default-model-on-redirect=true # Whether the content of the "default" model should be ignored during redirect scenarios.
 392 spring.mvc.locale= # Locale to use. By default, this locale is overridden by the "Accept-Language" header.
 393 spring.mvc.locale-resolver=accept-header # Define how the locale should be resolved.
 394 spring.mvc.log-resolved-exception=false # Whether to enable warn logging of exceptions resolved by a "HandlerExceptionResolver".
 395 spring.mvc.message-codes-resolver-format= # Formatting strategy for message codes. For instance, `PREFIX_ERROR_CODE`.
 396 spring.mvc.pathmatch.use-registered-suffix-pattern=false # Whether suffix pattern matching should work only against extensions registered with "spring.mvc.contentnegotiation.media-types.*".
 397 spring.mvc.pathmatch.use-suffix-pattern=false # Whether to use suffix pattern match (".*") when matching patterns to requests.
 398 spring.mvc.servlet.load-on-startup=-1 # Load on startup priority of the dispatcher servlet.
 399 spring.mvc.static-path-pattern=/** # Path pattern used for static resources.
 400 spring.mvc.throw-exception-if-no-handler-found=false # Whether a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.
 401 spring.mvc.view.prefix= # Spring MVC view prefix.
 402 spring.mvc.view.suffix= # Spring MVC view suffix.
 403 
 404 # SPRING RESOURCES HANDLING (ResourceProperties)
 405 spring.resources.add-mappings=true # Whether to enable default resource handling.
 406 spring.resources.cache.cachecontrol.cache-private= # Indicate that the response message is intended for a single user and must not be stored by a shared cache.
 407 spring.resources.cache.cachecontrol.cache-public= # Indicate that any cache may store the response.
 408 spring.resources.cache.cachecontrol.max-age= # Maximum time the response should be cached, in seconds if no duration suffix is not specified.
 409 spring.resources.cache.cachecontrol.must-revalidate= # Indicate that once it has become stale, a cache must not use the response without re-validating it with the server.
 410 spring.resources.cache.cachecontrol.no-cache= # Indicate that the cached response can be reused only if re-validated with the server.
 411 spring.resources.cache.cachecontrol.no-store= # Indicate to not cache the response in any case.
 412 spring.resources.cache.cachecontrol.no-transform= # Indicate intermediaries (caches and others) that they should not transform the response content.
 413 spring.resources.cache.cachecontrol.proxy-revalidate= # Same meaning as the "must-revalidate" directive, except that it does not apply to private caches.
 414 spring.resources.cache.cachecontrol.s-max-age= # Maximum time the response should be cached by shared caches, in seconds if no duration suffix is not specified.
 415 spring.resources.cache.cachecontrol.stale-if-error= # Maximum time the response may be used when errors are encountered, in seconds if no duration suffix is not specified.
 416 spring.resources.cache.cachecontrol.stale-while-revalidate= # Maximum time the response can be served after it becomes stale, in seconds if no duration suffix is not specified.
 417 spring.resources.cache.period= # Cache period for the resources served by the resource handler. If a duration suffix is not specified, seconds will be used.
 418 spring.resources.chain.cache=true # Whether to enable caching in the Resource chain.
 419 spring.resources.chain.enabled= # Whether to enable the Spring Resource Handling chain. By default, disabled unless at least one strategy has been enabled.
 420 spring.resources.chain.gzipped=false # Whether to enable resolution of already gzipped resources.
 421 spring.resources.chain.html-application-cache=false # Whether to enable HTML5 application cache manifest rewriting.
 422 spring.resources.chain.strategy.content.enabled=false # Whether to enable the content Version Strategy.
 423 spring.resources.chain.strategy.content.paths=/** # Comma-separated list of patterns to apply to the content Version Strategy.
 424 spring.resources.chain.strategy.fixed.enabled=false # Whether to enable the fixed Version Strategy.
 425 spring.resources.chain.strategy.fixed.paths=/** # Comma-separated list of patterns to apply to the fixed Version Strategy.
 426 spring.resources.chain.strategy.fixed.version= # Version string to use for the fixed Version Strategy.
 427 spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ # Locations of static resources.
 428 
 429 # SPRING SESSION (SessionProperties)
 430 spring.session.store-type= # Session store type.
 431 spring.session.timeout= # Session timeout. If a duration suffix is not specified, seconds will be used.
 432 spring.session.servlet.filter-order=-2147483598 # Session repository filter order.
 433 spring.session.servlet.filter-dispatcher-types=async,error,request # Session repository filter dispatcher types.
 434 
 435 # SPRING SESSION HAZELCAST (HazelcastSessionProperties)
 436 spring.session.hazelcast.flush-mode=on-save # Sessions flush mode.
 437 spring.session.hazelcast.map-name=spring:session:sessions # Name of the map used to store sessions.
 438 
 439 # SPRING SESSION JDBC (JdbcSessionProperties)
 440 spring.session.jdbc.cleanup-cron=0 * * * * * # Cron expression for expired session cleanup job.
 441 spring.session.jdbc.initialize-schema=embedded # Database schema initialization mode.
 442 spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
 443 spring.session.jdbc.table-name=SPRING_SESSION # Name of the database table used to store sessions.
 444 
 445 # SPRING SESSION MONGODB (MongoSessionProperties)
 446 spring.session.mongodb.collection-name=sessions # Collection name used to store sessions.
 447 
 448 # SPRING SESSION REDIS (RedisSessionProperties)
 449 spring.session.redis.cleanup-cron=0 * * * * * # Cron expression for expired session cleanup job.
 450 spring.session.redis.flush-mode=on-save # Sessions flush mode.
 451 spring.session.redis.namespace=spring:session # Namespace for keys used to store sessions.
 452 
 453 # THYMELEAF (ThymeleafAutoConfiguration)
 454 spring.thymeleaf.cache=true # Whether to enable template caching.
 455 spring.thymeleaf.check-template=true # Whether to check that the template exists before rendering it.
 456 spring.thymeleaf.check-template-location=true # Whether to check that the templates location exists.
 457 spring.thymeleaf.enabled=true # Whether to enable Thymeleaf view resolution for Web frameworks.
 458 spring.thymeleaf.enable-spring-el-compiler=false # Enable the SpringEL compiler in SpringEL expressions.
 459 spring.thymeleaf.encoding=UTF-8 # Template files encoding.
 460 spring.thymeleaf.excluded-view-names= # Comma-separated list of view names (patterns allowed) that should be excluded from resolution.
 461 spring.thymeleaf.mode=HTML # Template mode to be applied to templates. See also Thymeleaf's TemplateMode enum.
 462 spring.thymeleaf.prefix=classpath:/templates/ # Prefix that gets prepended to view names when building a URL.
 463 spring.thymeleaf.reactive.chunked-mode-view-names= # Comma-separated list of view names (patterns allowed) that should be the only ones executed in CHUNKED mode when a max chunk size is set.
 464 spring.thymeleaf.reactive.full-mode-view-names= # Comma-separated list of view names (patterns allowed) that should be executed in FULL mode even if a max chunk size is set.
 465 spring.thymeleaf.reactive.max-chunk-size=0 # Maximum size of data buffers used for writing to the response, in bytes.
 466 spring.thymeleaf.reactive.media-types= # Media types supported by the view technology.
 467 spring.thymeleaf.servlet.content-type=text/html # Content-Type value written to HTTP responses.
 468 spring.thymeleaf.suffix=.html # Suffix that gets appended to view names when building a URL.
 469 spring.thymeleaf.template-resolver-order= # Order of the template resolver in the chain.
 470 spring.thymeleaf.view-names= # Comma-separated list of view names (patterns allowed) that can be resolved.
 471 
 472 # SPRING WEBFLUX (WebFluxProperties)
 473 spring.webflux.date-format= # Date format to use. For instance, `dd/MM/yyyy`.
 474 spring.webflux.static-path-pattern=/** # Path pattern used for static resources.
 475 
 476 # SPRING WEB SERVICES (WebServicesProperties)
 477 spring.webservices.path=/services # Path that serves as the base URI for the services.
 478 spring.webservices.servlet.init= # Servlet init parameters to pass to Spring Web Services.
 479 spring.webservices.servlet.load-on-startup=-1 # Load on startup priority of the Spring Web Services servlet.
 480 spring.webservices.wsdl-locations= # Comma-separated list of locations of WSDLs and accompanying XSDs to be exposed as beans.
 481 
 482 
 483 
 484 # ----------------------------------------
 485 # SECURITY PROPERTIES
 486 # ----------------------------------------
 487 # SECURITY (SecurityProperties)
 488 spring.security.filter.order=-100 # Security filter chain order.
 489 spring.security.filter.dispatcher-types=async,error,request # Security filter chain dispatcher types.
 490 spring.security.user.name=user # Default user name.
 491 spring.security.user.password= # Password for the default user name.
 492 spring.security.user.roles= # Granted roles for the default user name.
 493 
 494 # SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)
 495 spring.security.oauth2.client.provider.*= # OAuth provider details.
 496 spring.security.oauth2.client.registration.*= # OAuth client registrations.
 497 
 498 # ----------------------------------------
 499 # DATA PROPERTIES
 500 # ----------------------------------------
 501 
 502 # FLYWAY (FlywayProperties)
 503 spring.flyway.baseline-description= #
 504 spring.flyway.baseline-on-migrate= #
 505 spring.flyway.baseline-version=1 # Version to start migration
 506 spring.flyway.check-location=true # Whether to check that migration scripts location exists.
 507 spring.flyway.clean-disabled= #
 508 spring.flyway.clean-on-validation-error= #
 509 spring.flyway.dry-run-output= #
 510 spring.flyway.enabled=true # Whether to enable flyway.
 511 spring.flyway.encoding= #
 512 spring.flyway.error-handlers= #
 513 spring.flyway.group= #
 514 spring.flyway.ignore-future-migrations= #
 515 spring.flyway.ignore-missing-migrations= #
 516 spring.flyway.init-sqls= # SQL statements to execute to initialize a connection immediately after obtaining it.
 517 spring.flyway.installed-by= #
 518 spring.flyway.locations=classpath:db/migration # The locations of migrations scripts.
 519 spring.flyway.mixed= #
 520 spring.flyway.out-of-order= #
 521 spring.flyway.password= # JDBC password to use if you want Flyway to create its own DataSource.
 522 spring.flyway.placeholder-prefix= #
 523 spring.flyway.placeholder-replacement= #
 524 spring.flyway.placeholder-suffix= #
 525 spring.flyway.placeholders.*= #
 526 spring.flyway.repeatable-sql-migration-prefix= #
 527 spring.flyway.schemas= # schemas to update
 528 spring.flyway.skip-default-callbacks= #
 529 spring.flyway.skip-default-resolvers= #
 530 spring.flyway.sql-migration-prefix=V #
 531 spring.flyway.sql-migration-separator= #
 532 spring.flyway.sql-migration-suffix=.sql #
 533 spring.flyway.sql-migration-suffixes= #
 534 spring.flyway.table= #
 535 spring.flyway.target= #
 536 spring.flyway.undo-sql-migration-prefix= #
 537 spring.flyway.url= # JDBC url of the database to migrate. If not set, the primary configured data source is used.
 538 spring.flyway.user= # Login user of the database to migrate.
 539 spring.flyway.validate-on-migrate= #
 540 
 541 # LIQUIBASE (LiquibaseProperties)
 542 spring.liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml # Change log configuration path.
 543 spring.liquibase.check-change-log-location=true # Whether to check that the change log location exists.
 544 spring.liquibase.contexts= # Comma-separated list of runtime contexts to use.
 545 spring.liquibase.default-schema= # Default database schema.
 546 spring.liquibase.drop-first=false # Whether to first drop the database schema.
 547 spring.liquibase.enabled=true # Whether to enable Liquibase support.
 548 spring.liquibase.labels= # Comma-separated list of runtime labels to use.
 549 spring.liquibase.parameters.*= # Change log parameters.
 550 spring.liquibase.password= # Login password of the database to migrate.
 551 spring.liquibase.rollback-file= # File to which rollback SQL is written when an update is performed.
 552 spring.liquibase.url= # JDBC URL of the database to migrate. If not set, the primary configured data source is used.
 553 spring.liquibase.user= # Login user of the database to migrate.
 554 
 555 # COUCHBASE (CouchbaseProperties)
 556 spring.couchbase.bootstrap-hosts= # Couchbase nodes (host or IP address) to bootstrap from.
 557 spring.couchbase.bucket.name=default # Name of the bucket to connect to.
 558 spring.couchbase.bucket.password=  # Password of the bucket.
 559 spring.couchbase.env.endpoints.key-value=1 # Number of sockets per node against the key/value service.
 560 spring.couchbase.env.endpoints.queryservice.min-endpoints=1 # Minimum number of sockets per node.
 561 spring.couchbase.env.endpoints.queryservice.max-endpoints=1 # Maximum number of sockets per node.
 562 spring.couchbase.env.endpoints.viewservice.min-endpoints=1 # Minimum number of sockets per node.
 563 spring.couchbase.env.endpoints.viewservice.max-endpoints=1 # Maximum number of sockets per node.
 564 spring.couchbase.env.ssl.enabled= # Whether to enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.
 565 spring.couchbase.env.ssl.key-store= # Path to the JVM key store that holds the certificates.
 566 spring.couchbase.env.ssl.key-store-password= # Password used to access the key store.
 567 spring.couchbase.env.timeouts.connect=5000ms # Bucket connections timeouts.
 568 spring.couchbase.env.timeouts.key-value=2500ms # Blocking operations performed on a specific key timeout.
 569 spring.couchbase.env.timeouts.query=7500ms # N1QL query operations timeout.
 570 spring.couchbase.env.timeouts.socket-connect=1000ms # Socket connect connections timeout.
 571 spring.couchbase.env.timeouts.view=7500ms # Regular and geospatial view operations timeout.
 572 
 573 # DAO (PersistenceExceptionTranslationAutoConfiguration)
 574 spring.dao.exceptiontranslation.enabled=true # Whether to enable the PersistenceExceptionTranslationPostProcessor.
 575 
 576 # CASSANDRA (CassandraProperties)
 577 spring.data.cassandra.cluster-name= # Name of the Cassandra cluster.
 578 spring.data.cassandra.compression=none # Compression supported by the Cassandra binary protocol.
 579 spring.data.cassandra.connect-timeout= # Socket option: connection time out.
 580 spring.data.cassandra.consistency-level= # Queries consistency level.
 581 spring.data.cassandra.contact-points=localhost # Cluster node addresses.
 582 spring.data.cassandra.fetch-size= # Queries default fetch size.
 583 spring.data.cassandra.keyspace-name= # Keyspace name to use.
 584 spring.data.cassandra.load-balancing-policy= # Class name of the load balancing policy.
 585 spring.data.cassandra.port= # Port of the Cassandra server.
 586 spring.data.cassandra.password= # Login password of the server.
 587 spring.data.cassandra.pool.heartbeat-interval=30s # Heartbeat interval after which a message is sent on an idle connection to make sure it's still alive. If a duration suffix is not specified, seconds will be used.
 588 spring.data.cassandra.pool.idle-timeout=120s # Idle timeout before an idle connection is removed. If a duration suffix is not specified, seconds will be used.
 589 spring.data.cassandra.pool.max-queue-size=256 # Maximum number of requests that get queued if no connection is available.
 590 spring.data.cassandra.pool.pool-timeout=5000ms # Pool timeout when trying to acquire a connection from a host's pool.
 591 spring.data.cassandra.read-timeout= # Socket option: read time out.
 592 spring.data.cassandra.reconnection-policy= # Reconnection policy class.
 593 spring.data.cassandra.repositories.type=auto # Type of Cassandra repositories to enable.
 594 spring.data.cassandra.retry-policy= # Class name of the retry policy.
 595 spring.data.cassandra.serial-consistency-level= # Queries serial consistency level.
 596 spring.data.cassandra.schema-action=none # Schema action to take at startup.
 597 spring.data.cassandra.ssl=false # Enable SSL support.
 598 spring.data.cassandra.username= # Login user of the server.
 599 
 600 # DATA COUCHBASE (CouchbaseDataProperties)
 601 spring.data.couchbase.auto-index=false # Automatically create views and indexes.
 602 spring.data.couchbase.consistency=read-your-own-writes # Consistency to apply by default on generated queries.
 603 spring.data.couchbase.repositories.type=auto # Type of Couchbase repositories to enable.
 604 
 605 # ELASTICSEARCH (ElasticsearchProperties)
 606 spring.data.elasticsearch.cluster-name=elasticsearch # Elasticsearch cluster name.
 607 spring.data.elasticsearch.cluster-nodes= # Comma-separated list of cluster node addresses.
 608 spring.data.elasticsearch.properties.*= # Additional properties used to configure the client.
 609 spring.data.elasticsearch.repositories.enabled=true # Whether to enable Elasticsearch repositories.
 610 
 611 # DATA LDAP
 612 spring.data.ldap.repositories.enabled=true # Whether to enable LDAP repositories.
 613 
 614 # MONGODB (MongoProperties)
 615 spring.data.mongodb.authentication-database= # Authentication database name.
 616 spring.data.mongodb.database= # Database name.
 617 spring.data.mongodb.field-naming-strategy= # Fully qualified name of the FieldNamingStrategy to use.
 618 spring.data.mongodb.grid-fs-database= # GridFS database name.
 619 spring.data.mongodb.host= # Mongo server host. Cannot be set with URI.
 620 spring.data.mongodb.password= # Login password of the mongo server. Cannot be set with URI.
 621 spring.data.mongodb.port= # Mongo server port. Cannot be set with URI.
 622 spring.data.mongodb.repositories.type=auto # Type of Mongo repositories to enable.
 623 spring.data.mongodb.uri=mongodb://localhost/test # Mongo database URI. Cannot be set with host, port and credentials.
 624 spring.data.mongodb.username= # Login user of the mongo server. Cannot be set with URI.
 625 
 626 # DATA REDIS
 627 spring.data.redis.repositories.enabled=true # Whether to enable Redis repositories.
 628 
 629 # NEO4J (Neo4jProperties)
 630 spring.data.neo4j.auto-index=none # Auto index mode.
 631 spring.data.neo4j.embedded.enabled=true # Whether to enable embedded mode if the embedded driver is available.
 632 spring.data.neo4j.open-in-view=true # Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.
 633 spring.data.neo4j.password= # Login password of the server.
 634 spring.data.neo4j.repositories.enabled=true # Whether to enable Neo4j repositories.
 635 spring.data.neo4j.uri= # URI used by the driver. Auto-detected by default.
 636 spring.data.neo4j.username= # Login user of the server.
 637 
 638 # DATA REST (RepositoryRestProperties)
 639 spring.data.rest.base-path= # Base path to be used by Spring Data REST to expose repository resources.
 640 spring.data.rest.default-media-type= # Content type to use as a default when none is specified.
 641 spring.data.rest.default-page-size= # Default size of pages.
 642 spring.data.rest.detection-strategy=default # Strategy to use to determine which repositories get exposed.
 643 spring.data.rest.enable-enum-translation= # Whether to enable enum value translation through the Spring Data REST default resource bundle.
 644 spring.data.rest.limit-param-name= # Name of the URL query string parameter that indicates how many results to return at once.
 645 spring.data.rest.max-page-size= # Maximum size of pages.
 646 spring.data.rest.page-param-name= # Name of the URL query string parameter that indicates what page to return.
 647 spring.data.rest.return-body-on-create= # Whether to return a response body after creating an entity.
 648 spring.data.rest.return-body-on-update= # Whether to return a response body after updating an entity.
 649 spring.data.rest.sort-param-name= # Name of the URL query string parameter that indicates what direction to sort results.
 650 
 651 # SOLR (SolrProperties)
 652 spring.data.solr.host=http://127.0.0.1:8983/solr # Solr host. Ignored if "zk-host" is set.
 653 spring.data.solr.repositories.enabled=true # Whether to enable Solr repositories.
 654 spring.data.solr.zk-host= # ZooKeeper host address in the form HOST:PORT.
 655 
 656 # DATA WEB (SpringDataWebProperties)
 657 spring.data.web.pageable.default-page-size=20 # Default page size.
 658 spring.data.web.pageable.max-page-size=2000 # Maximum page size to be accepted.
 659 spring.data.web.pageable.one-indexed-parameters=false # Whether to expose and assume 1-based page number indexes.
 660 spring.data.web.pageable.page-parameter=page # Page index parameter name.
 661 spring.data.web.pageable.prefix= # General prefix to be prepended to the page number and page size parameters.
 662 spring.data.web.pageable.qualifier-delimiter=_ # Delimiter to be used between the qualifier and the actual page number and size properties.
 663 spring.data.web.pageable.size-parameter=size # Page size parameter name.
 664 spring.data.web.sort.sort-parameter=sort # Sort parameter name.
 665 
 666 # DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)
 667 spring.datasource.continue-on-error=false # Whether to stop if an error occurs while initializing the database.
 668 spring.datasource.data= # Data (DML) script resource references.
 669 spring.datasource.data-username= # Username of the database to execute DML scripts (if different).
 670 spring.datasource.data-password= # Password of the database to execute DML scripts (if different).
 671 spring.datasource.dbcp2.*= # Commons DBCP2 specific settings
 672 spring.datasource.driver-class-name= # Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.
 673 spring.datasource.generate-unique-name=false # Whether to generate a random datasource name.
 674 spring.datasource.hikari.*= # Hikari specific settings
 675 spring.datasource.initialization-mode=embedded # Initialize the datasource with available DDL and DML scripts.
 676 spring.datasource.jmx-enabled=false # Whether to enable JMX support (if provided by the underlying pool).
 677 spring.datasource.jndi-name= # JNDI location of the datasource. Class, url, username & password are ignored when set.
 678 spring.datasource.name= # Name of the datasource. Default to "testdb" when using an embedded database.
 679 spring.datasource.password= # Login password of the database.
 680 spring.datasource.platform=all # Platform to use in the DDL or DML scripts (such as schema-${platform}.sql or data-${platform}.sql).
 681 spring.datasource.schema= # Schema (DDL) script resource references.
 682 spring.datasource.schema-username= # Username of the database to execute DDL scripts (if different).
 683 spring.datasource.schema-password= # Password of the database to execute DDL scripts (if different).
 684 spring.datasource.separator=; # Statement separator in SQL initialization scripts.
 685 spring.datasource.sql-script-encoding= # SQL scripts encoding.
 686 spring.datasource.tomcat.*= # Tomcat datasource specific settings
 687 spring.datasource.type= # Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.
 688 spring.datasource.url= # JDBC URL of the database.
 689 spring.datasource.username= # Login username of the database.
 690 spring.datasource.xa.data-source-class-name= # XA datasource fully qualified name.
 691 spring.datasource.xa.properties= # Properties to pass to the XA data source.
 692 
 693 # JEST (Elasticsearch HTTP client) (JestProperties)
 694 spring.elasticsearch.jest.connection-timeout=3s # Connection timeout.
 695 spring.elasticsearch.jest.multi-threaded=true # Whether to enable connection requests from multiple execution threads.
 696 spring.elasticsearch.jest.password= # Login password.
 697 spring.elasticsearch.jest.proxy.host= # Proxy host the HTTP client should use.
 698 spring.elasticsearch.jest.proxy.port= # Proxy port the HTTP client should use.
 699 spring.elasticsearch.jest.read-timeout=3s # Read timeout.
 700 spring.elasticsearch.jest.uris=http://localhost:9200 # Comma-separated list of the Elasticsearch instances to use.
 701 spring.elasticsearch.jest.username= # Login username.
 702 
 703 # H2 Web Console (H2ConsoleProperties)
 704 spring.h2.console.enabled=false # Whether to enable the console.
 705 spring.h2.console.path=/h2-console # Path at which the console is available.
 706 spring.h2.console.settings.trace=false # Whether to enable trace output.
 707 spring.h2.console.settings.web-allow-others=false # Whether to enable remote access.
 708 
 709 # InfluxDB (InfluxDbProperties)
 710 spring.influx.password= # Login password.
 711 spring.influx.url= # URL of the InfluxDB instance to which to connect.
 712 spring.influx.user= # Login user.
 713 
 714 # JOOQ (JooqProperties)
 715 spring.jooq.sql-dialect= # SQL dialect to use. Auto-detected by default.
 716 
 717 # JDBC (JdbcProperties)
 718 spring.jdbc.template.fetch-size=-1 # Number of rows that should be fetched from the database when more rows are needed.
 719 spring.jdbc.template.max-rows=-1 # Maximum number of rows.
 720 spring.jdbc.template.query-timeout= # Query timeout. Default is to use the JDBC driver's default configuration. If a duration suffix is not specified, seconds will be used.
 721 
 722 # JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)
 723 spring.data.jpa.repositories.enabled=true # Whether to enable JPA repositories.
 724 spring.jpa.database= # Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.
 725 spring.jpa.database-platform= # Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.
 726 spring.jpa.generate-ddl=false # Whether to initialize the schema on startup.
 727 spring.jpa.hibernate.ddl-auto= # DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Defaults to "create-drop" when using an embedded database and no schema manager was detected. Otherwise, defaults to "none".
 728 spring.jpa.hibernate.naming.implicit-strategy= # Fully qualified name of the implicit naming strategy.
 729 spring.jpa.hibernate.naming.physical-strategy= # Fully qualified name of the physical naming strategy.
 730 spring.jpa.hibernate.use-new-id-generator-mappings= # Whether to use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.
 731 spring.jpa.mapping-resources= # Mapping resources (equivalent to "mapping-file" entries in persistence.xml).
 732 spring.jpa.open-in-view=true # Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.
 733 spring.jpa.properties.*= # Additional native properties to set on the JPA provider.
 734 spring.jpa.show-sql=false # Whether to enable logging of SQL statements.
 735 
 736 # JTA (JtaAutoConfiguration)
 737 spring.jta.enabled=true # Whether to enable JTA support.
 738 spring.jta.log-dir= # Transaction logs directory.
 739 spring.jta.transaction-manager-id= # Transaction manager unique identifier.
 740 
 741 # ATOMIKOS (AtomikosProperties)
 742 spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
 743 spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true # Whether to ignore the transacted flag when creating session.
 744 spring.jta.atomikos.connectionfactory.local-transaction-mode=false # Whether local transactions are desired.
 745 spring.jta.atomikos.connectionfactory.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
 746 spring.jta.atomikos.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
 747 spring.jta.atomikos.connectionfactory.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
 748 spring.jta.atomikos.connectionfactory.max-pool-size=1 # The maximum size of the pool.
 749 spring.jta.atomikos.connectionfactory.min-pool-size=1 # The minimum size of the pool.
 750 spring.jta.atomikos.connectionfactory.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
 751 spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
 752 spring.jta.atomikos.connectionfactory.xa-connection-factory-class-name= # Vendor-specific implementation of XAConnectionFactory.
 753 spring.jta.atomikos.connectionfactory.xa-properties= # Vendor-specific XA properties.
 754 spring.jta.atomikos.datasource.borrow-connection-timeout=30 # Timeout, in seconds, for borrowing connections from the pool.
 755 spring.jta.atomikos.datasource.concurrent-connection-validation= # Whether to use concurrent connection validation.
 756 spring.jta.atomikos.datasource.default-isolation-level= # Default isolation level of connections provided by the pool.
 757 spring.jta.atomikos.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
 758 spring.jta.atomikos.datasource.maintenance-interval=60 # The time, in seconds, between runs of the pool's maintenance thread.
 759 spring.jta.atomikos.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
 760 spring.jta.atomikos.datasource.max-lifetime=0 # The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.
 761 spring.jta.atomikos.datasource.max-pool-size=1 # The maximum size of the pool.
 762 spring.jta.atomikos.datasource.min-pool-size=1 # The minimum size of the pool.
 763 spring.jta.atomikos.datasource.reap-timeout=0 # The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.
 764 spring.jta.atomikos.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
 765 spring.jta.atomikos.datasource.unique-resource-name=dataSource # The unique name used to identify the resource during recovery.
 766 spring.jta.atomikos.datasource.xa-data-source-class-name= # Vendor-specific implementation of XAConnectionFactory.
 767 spring.jta.atomikos.datasource.xa-properties= # Vendor-specific XA properties.
 768 spring.jta.atomikos.properties.allow-sub-transactions=true # Specify whether sub-transactions are allowed.
 769 spring.jta.atomikos.properties.checkpoint-interval=500 # Interval between checkpoints, expressed as the number of log writes between two checkpoints.
 770 spring.jta.atomikos.properties.default-jta-timeout=10000ms # Default timeout for JTA transactions.
 771 spring.jta.atomikos.properties.default-max-wait-time-on-shutdown=9223372036854775807 # How long should normal shutdown (no-force) wait for transactions to complete.
 772 spring.jta.atomikos.properties.enable-logging=true # Whether to enable disk logging.
 773 spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false # Whether a VM shutdown should trigger forced shutdown of the transaction core.
 774 spring.jta.atomikos.properties.log-base-dir= # Directory in which the log files should be stored.
 775 spring.jta.atomikos.properties.log-base-name=tmlog # Transactions log file base name.
 776 spring.jta.atomikos.properties.max-actives=50 # Maximum number of active transactions.
 777 spring.jta.atomikos.properties.max-timeout=300000ms # Maximum timeout that can be allowed for transactions.
 778 spring.jta.atomikos.properties.recovery.delay=10000ms # Delay between two recovery scans.
 779 spring.jta.atomikos.properties.recovery.forget-orphaned-log-entries-delay=86400000ms # Delay after which recovery can cleanup pending ('orphaned') log entries.
 780 spring.jta.atomikos.properties.recovery.max-retries=5 # Number of retry attempts to commit the transaction before throwing an exception.
 781 spring.jta.atomikos.properties.recovery.retry-interval=10000ms # Delay between retry attempts.
 782 spring.jta.atomikos.properties.serial-jta-transactions=true # Whether sub-transactions should be joined when possible.
 783 spring.jta.atomikos.properties.service= # Transaction manager implementation that should be started.
 784 spring.jta.atomikos.properties.threaded-two-phase-commit=false # Whether to use different (and concurrent) threads for two-phase commit on the participating resources.
 785 spring.jta.atomikos.properties.transaction-manager-unique-name= # The transaction manager's unique name.
 786 
 787 # BITRONIX
 788 spring.jta.bitronix.connectionfactory.acquire-increment=1 # Number of connections to create when growing the pool.
 789 spring.jta.bitronix.connectionfactory.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
 790 spring.jta.bitronix.connectionfactory.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
 791 spring.jta.bitronix.connectionfactory.allow-local-transactions=true # Whether the transaction manager should allow mixing XA and non-XA transactions.
 792 spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
 793 spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
 794 spring.jta.bitronix.connectionfactory.cache-producers-consumers=true # Whether producers and consumers should be cached.
 795 spring.jta.bitronix.connectionfactory.class-name= # Underlying implementation class name of the XA resource.
 796 spring.jta.bitronix.connectionfactory.defer-connection-release=true # Whether the provider can run many transactions on the same connection and supports transaction interleaving.
 797 spring.jta.bitronix.connectionfactory.disabled= # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
 798 spring.jta.bitronix.connectionfactory.driver-properties= # Properties that should be set on the underlying implementation.
 799 spring.jta.bitronix.connectionfactory.failed= # Mark this resource producer as failed.
 800 spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false # Whether recovery failures should be ignored.
 801 spring.jta.bitronix.connectionfactory.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
 802 spring.jta.bitronix.connectionfactory.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
 803 spring.jta.bitronix.connectionfactory.min-pool-size=0 # The minimum size of the pool.
 804 spring.jta.bitronix.connectionfactory.password= # The password to use to connect to the JMS provider.
 805 spring.jta.bitronix.connectionfactory.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
 806 spring.jta.bitronix.connectionfactory.test-connections=true # Whether connections should be tested when acquired from the pool.
 807 spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, always last is Integer.MAX_VALUE).
 808 spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory # The unique name used to identify the resource during recovery.
 809 spring.jta.bitronix.connectionfactory.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
 810 spring.jta.bitronix.connectionfactory.user= # The user to use to connect to the JMS provider.
 811 spring.jta.bitronix.datasource.acquire-increment=1 # Number of connections to create when growing the pool.
 812 spring.jta.bitronix.datasource.acquisition-interval=1 # Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.
 813 spring.jta.bitronix.datasource.acquisition-timeout=30 # Timeout, in seconds, for acquiring connections from the pool.
 814 spring.jta.bitronix.datasource.allow-local-transactions=true # Whether the transaction manager should allow mixing XA and non-XA transactions.
 815 spring.jta.bitronix.datasource.apply-transaction-timeout=false # Whether the transaction timeout should be set on the XAResource when it is enlisted.
 816 spring.jta.bitronix.datasource.automatic-enlisting-enabled=true # Whether resources should be enlisted and delisted automatically.
 817 spring.jta.bitronix.datasource.class-name= # Underlying implementation class name of the XA resource.
 818 spring.jta.bitronix.datasource.cursor-holdability= # The default cursor holdability for connections.
 819 spring.jta.bitronix.datasource.defer-connection-release=true # Whether the database can run many transactions on the same connection and supports transaction interleaving.
 820 spring.jta.bitronix.datasource.disabled= # Whether this resource is disabled, meaning it's temporarily forbidden to acquire a connection from its pool.
 821 spring.jta.bitronix.datasource.driver-properties= # Properties that should be set on the underlying implementation.
 822 spring.jta.bitronix.datasource.enable-jdbc4-connection-test= # Whether Connection.isValid() is called when acquiring a connection from the pool.
 823 spring.jta.bitronix.datasource.failed= # Mark this resource producer as failed.
 824 spring.jta.bitronix.datasource.ignore-recovery-failures=false # Whether recovery failures should be ignored.
 825 spring.jta.bitronix.datasource.isolation-level= # The default isolation level for connections.
 826 spring.jta.bitronix.datasource.local-auto-commit= # The default auto-commit mode for local transactions.
 827 spring.jta.bitronix.datasource.login-timeout= # Timeout, in seconds, for establishing a database connection.
 828 spring.jta.bitronix.datasource.max-idle-time=60 # The time, in seconds, after which connections are cleaned up from the pool.
 829 spring.jta.bitronix.datasource.max-pool-size=10 # The maximum size of the pool. 0 denotes no limit.
 830 spring.jta.bitronix.datasource.min-pool-size=0 # The minimum size of the pool.
 831 spring.jta.bitronix.datasource.prepared-statement-cache-size=0 # The target size of the prepared statement cache. 0 disables the cache.
 832 spring.jta.bitronix.datasource.share-transaction-connections=false #  Whether connections in the ACCESSIBLE state can be shared within the context of a transaction.
 833 spring.jta.bitronix.datasource.test-query= # SQL query or statement used to validate a connection before returning it.
 834 spring.jta.bitronix.datasource.two-pc-ordering-position=1 # The position that this resource should take during two-phase commit (always first is Integer.MIN_VALUE, and always last is Integer.MAX_VALUE).
 835 spring.jta.bitronix.datasource.unique-name=dataSource # The unique name used to identify the resource during recovery.
 836 spring.jta.bitronix.datasource.use-tm-join=true # Whether TMJOIN should be used when starting XAResources.
 837 spring.jta.bitronix.properties.allow-multiple-lrc=false # Whether to allow multiple LRC resources to be enlisted into the same transaction.
 838 spring.jta.bitronix.properties.asynchronous2-pc=false # Whether to enable asynchronously execution of two phase commit.
 839 spring.jta.bitronix.properties.background-recovery-interval-seconds=60 # Interval in seconds at which to run the recovery process in the background.
 840 spring.jta.bitronix.properties.current-node-only-recovery=true # Whether to recover only the current node.
 841 spring.jta.bitronix.properties.debug-zero-resource-transaction=false # Whether to log the creation and commit call stacks of transactions executed without a single enlisted resource.
 842 spring.jta.bitronix.properties.default-transaction-timeout=60 # Default transaction timeout, in seconds.
 843 spring.jta.bitronix.properties.disable-jmx=false # Whether to enable JMX support.
 844 spring.jta.bitronix.properties.exception-analyzer= # Set the fully qualified name of the exception analyzer implementation to use.
 845 spring.jta.bitronix.properties.filter-log-status=false # Whether to enable filtering of logs so that only mandatory logs are written.
 846 spring.jta.bitronix.properties.force-batching-enabled=true #  Whether disk forces are batched.
 847 spring.jta.bitronix.properties.forced-write-enabled=true # Whether logs are forced to disk.
 848 spring.jta.bitronix.properties.graceful-shutdown-interval=60 # Maximum amount of seconds the TM waits for transactions to get done before aborting them at shutdown time.
 849 spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= # JNDI name of the TransactionSynchronizationRegistry.
 850 spring.jta.bitronix.properties.jndi-user-transaction-name= # JNDI name of the UserTransaction.
 851 spring.jta.bitronix.properties.journal=disk # Name of the journal. Can be 'disk', 'null', or a class name.
 852 spring.jta.bitronix.properties.log-part1-filename=btm1.tlog # Name of the first fragment of the journal.
 853 spring.jta.bitronix.properties.log-part2-filename=btm2.tlog # Name of the second fragment of the journal.
 854 spring.jta.bitronix.properties.max-log-size-in-mb=2 # Maximum size in megabytes of the journal fragments.
 855 spring.jta.bitronix.properties.resource-configuration-filename= # ResourceLoader configuration file name.
 856 spring.jta.bitronix.properties.server-id= # ASCII ID that must uniquely identify this TM instance. Defaults to the machine's IP address.
 857 spring.jta.bitronix.properties.skip-corrupted-logs=false # Skip corrupted transactions log entries.
 858 spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true # Whether to log a warning for transactions executed without a single enlisted resource.
 859 
 860 # NARAYANA (NarayanaProperties)
 861 spring.jta.narayana.default-timeout=60s # Transaction timeout. If a duration suffix is not specified, seconds will be used.
 862 spring.jta.narayana.expiry-scanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner # Comma-separated list of expiry scanners.
 863 spring.jta.narayana.log-dir= # Transaction object store directory.
 864 spring.jta.narayana.one-phase-commit=true # Whether to enable one phase commit optimization.
 865 spring.jta.narayana.periodic-recovery-period=120s # Interval in which periodic recovery scans are performed. If a duration suffix is not specified, seconds will be used.
 866 spring.jta.narayana.recovery-backoff-period=10s # Back off period between first and second phases of the recovery scan. If a duration suffix is not specified, seconds will be used.
 867 spring.jta.narayana.recovery-db-pass= # Database password to be used by the recovery manager.
 868 spring.jta.narayana.recovery-db-user= # Database username to be used by the recovery manager.
 869 spring.jta.narayana.recovery-jms-pass= # JMS password to be used by the recovery manager.
 870 spring.jta.narayana.recovery-jms-user= # JMS username to be used by the recovery manager.
 871 spring.jta.narayana.recovery-modules= # Comma-separated list of recovery modules.
 872 spring.jta.narayana.transaction-manager-id=1 # Unique transaction manager id.
 873 spring.jta.narayana.xa-resource-orphan-filters= # Comma-separated list of orphan filters.
 874 
 875 # EMBEDDED MONGODB (EmbeddedMongoProperties)
 876 spring.mongodb.embedded.features=sync_delay # Comma-separated list of features to enable.
 877 spring.mongodb.embedded.storage.database-dir= # Directory used for data storage.
 878 spring.mongodb.embedded.storage.oplog-size= # Maximum size of the oplog, in megabytes.
 879 spring.mongodb.embedded.storage.repl-set-name= # Name of the replica set.
 880 spring.mongodb.embedded.version=3.2.2 # Version of Mongo to use.
 881 
 882 # REDIS (RedisProperties)
 883 spring.redis.cluster.max-redirects= # Maximum number of redirects to follow when executing commands across the cluster.
 884 spring.redis.cluster.nodes= # Comma-separated list of "host:port" pairs to bootstrap from.
 885 spring.redis.database=0 # Database index used by the connection factory.
 886 spring.redis.url= # Connection URL. Overrides host, port, and password. User is ignored. Example: redis://user:password@example.com:6379
 887 spring.redis.host=localhost # Redis server host.
 888 spring.redis.jedis.pool.max-active=8 # Maximum number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
 889 spring.redis.jedis.pool.max-idle=8 # Maximum number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
 890 spring.redis.jedis.pool.max-wait=-1ms # Maximum amount of time a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
 891 spring.redis.jedis.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
 892 spring.redis.lettuce.pool.max-active=8 # Maximum number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.
 893 spring.redis.lettuce.pool.max-idle=8 # Maximum number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.
 894 spring.redis.lettuce.pool.max-wait=-1ms # Maximum amount of time a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.
 895 spring.redis.lettuce.pool.min-idle=0 # Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.
 896 spring.redis.lettuce.shutdown-timeout=100ms # Shutdown timeout.
 897 spring.redis.password= # Login password of the redis server.
 898 spring.redis.port=6379 # Redis server port.
 899 spring.redis.sentinel.master= # Name of the Redis server.
 900 spring.redis.sentinel.nodes= # Comma-separated list of "host:port" pairs.
 901 spring.redis.ssl=false # Whether to enable SSL support.
 902 spring.redis.timeout= # Connection timeout.
 903 
 904 # TRANSACTION (TransactionProperties)
 905 spring.transaction.default-timeout= # Default transaction timeout. If a duration suffix is not specified, seconds will be used.
 906 spring.transaction.rollback-on-commit-failure= # Whether to roll back on commit failures.
 907 
 908 
 909 
 910 # ----------------------------------------
 911 # INTEGRATION PROPERTIES
 912 # ----------------------------------------
 913 
 914 # ACTIVEMQ (ActiveMQProperties)
 915 spring.activemq.broker-url= # URL of the ActiveMQ broker. Auto-generated by default.
 916 spring.activemq.close-timeout=15s # Time to wait before considering a close complete.
 917 spring.activemq.in-memory=true # Whether the default broker URL should be in memory. Ignored if an explicit broker has been specified.
 918 spring.activemq.non-blocking-redelivery=false # Whether to stop message delivery before re-delivering messages from a rolled back transaction. This implies that message order is not preserved when this is enabled.
 919 spring.activemq.password= # Login password of the broker.
 920 spring.activemq.send-timeout=0ms # Time to wait on message sends for a response. Set it to 0 to wait forever.
 921 spring.activemq.user= # Login user of the broker.
 922 spring.activemq.packages.trust-all= # Whether to trust all packages.
 923 spring.activemq.packages.trusted= # Comma-separated list of specific packages to trust (when not trusting all packages).
 924 spring.activemq.pool.block-if-full=true # Whether to block when a connection is requested and the pool is full. Set it to false to throw a "JMSException" instead.
 925 spring.activemq.pool.block-if-full-timeout=-1ms # Blocking period before throwing an exception if the pool is still full.
 926 spring.activemq.pool.enabled=false # Whether a PooledConnectionFactory should be created, instead of a regular ConnectionFactory.
 927 spring.activemq.pool.idle-timeout=30s # Connection idle timeout.
 928 spring.activemq.pool.max-connections=1 # Maximum number of pooled connections.
 929 spring.activemq.pool.maximum-active-session-per-connection=500 # Maximum number of active sessions per connection.
 930 spring.activemq.pool.time-between-expiration-check=-1ms # Time to sleep between runs of the idle connection eviction thread. When negative, no idle connection eviction thread runs.
 931 spring.activemq.pool.use-anonymous-producers=true # Whether to use only one anonymous "MessageProducer" instance. Set it to false to create one "MessageProducer" every time one is required.
 932 
 933 # ARTEMIS (ArtemisProperties)
 934 spring.artemis.embedded.cluster-password= # Cluster password. Randomly generated on startup by default.
 935 spring.artemis.embedded.data-directory= # Journal file directory. Not necessary if persistence is turned off.
 936 spring.artemis.embedded.enabled=true # Whether to enable embedded mode if the Artemis server APIs are available.
 937 spring.artemis.embedded.persistent=false # Whether to enable persistent store.
 938 spring.artemis.embedded.queues= # Comma-separated list of queues to create on startup.
 939 spring.artemis.embedded.server-id= # Server ID. By default, an auto-incremented counter is used.
 940 spring.artemis.embedded.topics= # Comma-separated list of topics to create on startup.
 941 spring.artemis.host=localhost # Artemis broker host.
 942 spring.artemis.mode= # Artemis deployment mode, auto-detected by default.
 943 spring.artemis.password= # Login password of the broker.
 944 spring.artemis.port=61616 # Artemis broker port.
 945 spring.artemis.user= # Login user of the broker.
 946 
 947 # SPRING BATCH (BatchProperties)
 948 spring.batch.initialize-schema=embedded # Database schema initialization mode.
 949 spring.batch.job.enabled=true # Execute all Spring Batch jobs in the context on startup.
 950 spring.batch.job.names= # Comma-separated list of job names to execute on startup (for instance, `job1,job2`). By default, all Jobs found in the context are executed.
 951 spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
 952 spring.batch.table-prefix= # Table prefix for all the batch meta-data tables.
 953 
 954 # SPRING INTEGRATION (IntegrationProperties)
 955 spring.integration.jdbc.initialize-schema=embedded # Database schema initialization mode.
 956 spring.integration.jdbc.schema=classpath:org/springframework/integration/jdbc/schema-@@platform@@.sql # Path to the SQL file to use to initialize the database schema.
 957 
 958 # JMS (JmsProperties)
 959 spring.jms.jndi-name= # Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.
 960 spring.jms.listener.acknowledge-mode= # Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.
 961 spring.jms.listener.auto-startup=true # Start the container automatically on startup.
 962 spring.jms.listener.concurrency= # Minimum number of concurrent consumers.
 963 spring.jms.listener.max-concurrency= # Maximum number of concurrent consumers.
 964 spring.jms.pub-sub-domain=false # Whether the default destination type is topic.
 965 spring.jms.template.default-destination= # Default destination to use on send and receive operations that do not have a destination parameter.
 966 spring.jms.template.delivery-delay= # Delivery delay to use for send calls.
 967 spring.jms.template.delivery-mode= # Delivery mode. Enables QoS (Quality of Service) when set.
 968 spring.jms.template.priority= # Priority of a message when sending. Enables QoS (Quality of Service) when set.
 969 spring.jms.template.qos-enabled= # Whether to enable explicit QoS (Quality of Service) when sending a message.
 970 spring.jms.template.receive-timeout= # Timeout to use for receive calls.
 971 spring.jms.template.time-to-live= # Time-to-live of a message when sending. Enables QoS (Quality of Service) when set.
 972 
 973 # APACHE KAFKA (KafkaProperties)
 974 spring.kafka.admin.client-id= # ID to pass to the server when making requests. Used for server-side logging.
 975 spring.kafka.admin.fail-fast=false # Whether to fail fast if the broker is not available on startup.
 976 spring.kafka.admin.properties.*= # Additional admin-specific properties used to configure the client.
 977 spring.kafka.admin.ssl.key-password= # Password of the private key in the key store file.
 978 spring.kafka.admin.ssl.keystore-location= # Location of the key store file.
 979 spring.kafka.admin.ssl.keystore-password= # Store password for the key store file.
 980 spring.kafka.admin.ssl.keystore-type= # Type of the key store.
 981 spring.kafka.admin.ssl.protocol= # SSL protocol to use.
 982 spring.kafka.admin.ssl.truststore-location= # Location of the trust store file.
 983 spring.kafka.admin.ssl.truststore-password= # Store password for the trust store file.
 984 spring.kafka.admin.ssl.truststore-type= # Type of the trust store.
 985 spring.kafka.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Applies to all components unless overridden.
 986 spring.kafka.client-id= # ID to pass to the server when making requests. Used for server-side logging.
 987 spring.kafka.consumer.auto-commit-interval= # Frequency with which the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' is set to true.
 988 spring.kafka.consumer.auto-offset-reset= # What to do when there is no initial offset in Kafka or if the current offset no longer exists on the server.
 989 spring.kafka.consumer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Overrides the global property, for consumers.
 990 spring.kafka.consumer.client-id= # ID to pass to the server when making requests. Used for server-side logging.
 991 spring.kafka.consumer.enable-auto-commit= # Whether the consumer's offset is periodically committed in the background.
 992 spring.kafka.consumer.fetch-max-wait= # Maximum amount of time the server blocks before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes".
 993 spring.kafka.consumer.fetch-min-size= # Minimum amount of data, in bytes, the server should return for a fetch request.
 994 spring.kafka.consumer.group-id= # Unique string that identifies the consumer group to which this consumer belongs.
 995 spring.kafka.consumer.heartbeat-interval= # Expected time between heartbeats to the consumer coordinator.
 996 spring.kafka.consumer.key-deserializer= # Deserializer class for keys.
 997 spring.kafka.consumer.max-poll-records= # Maximum number of records returned in a single call to poll().
 998 spring.kafka.consumer.properties.*= # Additional consumer-specific properties used to configure the client.
 999 spring.kafka.consumer.ssl.key-password= # Password of the private key in the key store file.
1000 spring.kafka.consumer.ssl.keystore-location= # Location of the key store file.
1001 spring.kafka.consumer.ssl.keystore-password= # Store password for the key store file.
1002 spring.kafka.consumer.ssl.keystore-type= # Type of the key store.
1003 spring.kafka.consumer.ssl.protocol= # SSL protocol to use.
1004 spring.kafka.consumer.ssl.truststore-location= # Location of the trust store file.
1005 spring.kafka.consumer.ssl.truststore-password= # Store password for the trust store file.
1006 spring.kafka.consumer.ssl.truststore-type= # Type of the trust store.
1007 spring.kafka.consumer.value-deserializer= # Deserializer class for values.
1008 spring.kafka.jaas.control-flag=required # Control flag for login configuration.
1009 spring.kafka.jaas.enabled=false # Whether to enable JAAS configuration.
1010 spring.kafka.jaas.login-module=com.sun.security.auth.module.Krb5LoginModule # Login module.
1011 spring.kafka.jaas.options= # Additional JAAS options.
1012 spring.kafka.listener.ack-count= # Number of records between offset commits when ackMode is "COUNT" or "COUNT_TIME".
1013 spring.kafka.listener.ack-mode= # Listener AckMode. See the spring-kafka documentation.
1014 spring.kafka.listener.ack-time= # Time between offset commits when ackMode is "TIME" or "COUNT_TIME".
1015 spring.kafka.listener.client-id= # Prefix for the listener's consumer client.id property.
1016 spring.kafka.listener.concurrency= # Number of threads to run in the listener containers.
1017 spring.kafka.listener.idle-event-interval= # Time between publishing idle consumer events (no data received).
1018 spring.kafka.listener.log-container-config= # Whether to log the container configuration during initialization (INFO level).
1019 spring.kafka.listener.monitor-interval= # Time between checks for non-responsive consumers. If a duration suffix is not specified, seconds will be used.
1020 spring.kafka.listener.no-poll-threshold= # Multiplier applied to "pollTimeout" to determine if a consumer is non-responsive.
1021 spring.kafka.listener.poll-timeout= # Timeout to use when polling the consumer.
1022 spring.kafka.listener.type=single # Listener type.
1023 spring.kafka.producer.acks= # Number of acknowledgments the producer requires the leader to have received before considering a request complete.
1024 spring.kafka.producer.batch-size= # Default batch size in bytes.
1025 spring.kafka.producer.bootstrap-servers= # Comma-delimited list of host:port pairs to use for establishing the initial connections to the Kafka cluster. Overrides the global property, for producers.
1026 spring.kafka.producer.buffer-memory= # Total bytes of memory the producer can use to buffer records waiting to be sent to the server.
1027 spring.kafka.producer.client-id= # ID to pass to the server when making requests. Used for server-side logging.
1028 spring.kafka.producer.compression-type= # Compression type for all data generated by the producer.
1029 spring.kafka.producer.key-serializer= # Serializer class for keys.
1030 spring.kafka.producer.properties.*= # Additional producer-specific properties used to configure the client.
1031 spring.kafka.producer.retries= # When greater than zero, enables retrying of failed sends.
1032 spring.kafka.producer.ssl.key-password= # Password of the private key in the key store file.
1033 spring.kafka.producer.ssl.keystore-location= # Location of the key store file.
1034 spring.kafka.producer.ssl.keystore-password= # Store password for the key store file.
1035 spring.kafka.producer.ssl.keystore-type= # Type of the key store.
1036 spring.kafka.producer.ssl.protocol= # SSL protocol to use.
1037 spring.kafka.producer.ssl.truststore-location= # Location of the trust store file.
1038 spring.kafka.producer.ssl.truststore-password= # Store password for the trust store file.
1039 spring.kafka.producer.ssl.truststore-type= # Type of the trust store.
1040 spring.kafka.producer.transaction-id-prefix= # When non empty, enables transaction support for producer.
1041 spring.kafka.producer.value-serializer= # Serializer class for values.
1042 spring.kafka.properties.*= # Additional properties, common to producers and consumers, used to configure the client.
1043 spring.kafka.ssl.key-password= # Password of the private key in the key store file.
1044 spring.kafka.ssl.keystore-location= # Location of the key store file.
1045 spring.kafka.ssl.keystore-password= # Store password for the key store file.
1046 spring.kafka.ssl.keystore-type= # Type of the key store.
1047 spring.kafka.ssl.protocol= # SSL protocol to use.
1048 spring.kafka.ssl.truststore-location= # Location of the trust store file.
1049 spring.kafka.ssl.truststore-password= # Store password for the trust store file.
1050 spring.kafka.ssl.truststore-type= # Type of the trust store.
1051 spring.kafka.template.default-topic= # Default topic to which messages are sent.
1052 
1053 # RABBIT (RabbitProperties)
1054 spring.rabbitmq.addresses= # Comma-separated list of addresses to which the client should connect.
1055 spring.rabbitmq.cache.channel.checkout-timeout= # Duration to wait to obtain a channel if the cache size has been reached.
1056 spring.rabbitmq.cache.channel.size= # Number of channels to retain in the cache.
1057 spring.rabbitmq.cache.connection.mode=channel # Connection factory cache mode.
1058 spring.rabbitmq.cache.connection.size= # Number of connections to cache.
1059 spring.rabbitmq.connection-timeout= # Connection timeout. Set it to zero to wait forever.
1060 spring.rabbitmq.dynamic=true # Whether to create an AmqpAdmin bean.
1061 spring.rabbitmq.host=localhost # RabbitMQ host.
1062 spring.rabbitmq.listener.direct.acknowledge-mode= # Acknowledge mode of container.
1063 spring.rabbitmq.listener.direct.auto-startup=true # Whether to start the container automatically on startup.
1064 spring.rabbitmq.listener.direct.consumers-per-queue= # Number of consumers per queue.
1065 spring.rabbitmq.listener.direct.default-requeue-rejected= # Whether rejected deliveries are re-queued by default.
1066 spring.rabbitmq.listener.direct.idle-event-interval= # How often idle container events should be published.
1067 spring.rabbitmq.listener.direct.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).
1068 spring.rabbitmq.listener.direct.retry.enabled=false # Whether publishing retries are enabled.
1069 spring.rabbitmq.listener.direct.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
1070 spring.rabbitmq.listener.direct.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
1071 spring.rabbitmq.listener.direct.retry.max-interval=10000ms # Maximum duration between attempts.
1072 spring.rabbitmq.listener.direct.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
1073 spring.rabbitmq.listener.direct.retry.stateless=true # Whether retries are stateless or stateful.
1074 spring.rabbitmq.listener.simple.acknowledge-mode= # Acknowledge mode of container.
1075 spring.rabbitmq.listener.simple.auto-startup=true # Whether to start the container automatically on startup.
1076 spring.rabbitmq.listener.simple.concurrency= # Minimum number of listener invoker threads.
1077 spring.rabbitmq.listener.simple.default-requeue-rejected= # Whether rejected deliveries are re-queued by default.
1078 spring.rabbitmq.listener.simple.idle-event-interval= # How often idle container events should be published.
1079 spring.rabbitmq.listener.simple.max-concurrency= # Maximum number of listener invoker threads.
1080 spring.rabbitmq.listener.simple.prefetch= # Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).
1081 spring.rabbitmq.listener.simple.retry.enabled=false # Whether publishing retries are enabled.
1082 spring.rabbitmq.listener.simple.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
1083 spring.rabbitmq.listener.simple.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
1084 spring.rabbitmq.listener.simple.retry.max-interval=10000ms # Maximum duration between attempts.
1085 spring.rabbitmq.listener.simple.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
1086 spring.rabbitmq.listener.simple.retry.stateless=true # Whether retries are stateless or stateful.
1087 spring.rabbitmq.listener.simple.transaction-size= # Number of messages to be processed in a transaction. That is, the number of messages between acks. For best results, it should be less than or equal to the prefetch count.
1088 spring.rabbitmq.listener.type=simple # Listener container type.
1089 spring.rabbitmq.password=guest # Login to authenticate against the broker.
1090 spring.rabbitmq.port=5672 # RabbitMQ port.
1091 spring.rabbitmq.publisher-confirms=false # Whether to enable publisher confirms.
1092 spring.rabbitmq.publisher-returns=false # Whether to enable publisher returns.
1093 spring.rabbitmq.requested-heartbeat= # Requested heartbeat timeout; zero for none. If a duration suffix is not specified, seconds will be used.
1094 spring.rabbitmq.ssl.algorithm= # SSL algorithm to use. By default, configured by the Rabbit client library.
1095 spring.rabbitmq.ssl.enabled=false # Whether to enable SSL support.
1096 spring.rabbitmq.ssl.key-store= # Path to the key store that holds the SSL certificate.
1097 spring.rabbitmq.ssl.key-store-password= # Password used to access the key store.
1098 spring.rabbitmq.ssl.key-store-type=PKCS12 # Key store type.
1099 spring.rabbitmq.ssl.trust-store= # Trust store that holds SSL certificates.
1100 spring.rabbitmq.ssl.trust-store-password= # Password used to access the trust store.
1101 spring.rabbitmq.ssl.trust-store-type=JKS # Trust store type.
1102 spring.rabbitmq.ssl.validate-server-certificate=true # Whether to enable server side certificate validation.
1103 spring.rabbitmq.ssl.verify-hostname= # Whether to enable hostname verification. Requires AMQP client 4.8 or above and defaults to true when a suitable client version is used.
1104 spring.rabbitmq.template.exchange= # Name of the default exchange to use for send operations.
1105 spring.rabbitmq.template.mandatory= # Whether to enable mandatory messages.
1106 spring.rabbitmq.template.receive-timeout= # Timeout for `receive()` operations.
1107 spring.rabbitmq.template.reply-timeout= # Timeout for `sendAndReceive()` operations.
1108 spring.rabbitmq.template.retry.enabled=false # Whether publishing retries are enabled.
1109 spring.rabbitmq.template.retry.initial-interval=1000ms # Duration between the first and second attempt to deliver a message.
1110 spring.rabbitmq.template.retry.max-attempts=3 # Maximum number of attempts to deliver a message.
1111 spring.rabbitmq.template.retry.max-interval=10000ms # Maximum duration between attempts.
1112 spring.rabbitmq.template.retry.multiplier=1 # Multiplier to apply to the previous retry interval.
1113 spring.rabbitmq.template.routing-key= # Value of a default routing key to use for send operations.
1114 spring.rabbitmq.username=guest # Login user to authenticate to the broker.
1115 spring.rabbitmq.virtual-host= # Virtual host to use when connecting to the broker.
1116 
1117 
1118 # ----------------------------------------
1119 # ACTUATOR PROPERTIES
1120 # ----------------------------------------
1121 
1122 # MANAGEMENT HTTP SERVER (ManagementServerProperties)
1123 management.server.add-application-context-header=false # Add the "X-Application-Context" HTTP header in each response.
1124 management.server.address= # Network address to which the management endpoints should bind. Requires a custom management.server.port.
1125 management.server.port= # Management endpoint HTTP port (uses the same port as the application by default). Configure a different port to use management-specific SSL.
1126 management.server.servlet.context-path= # Management endpoint context-path (for instance, `/management`). Requires a custom management.server.port.
1127 management.server.ssl.ciphers= # Supported SSL ciphers. Requires a custom management.port.
1128 management.server.ssl.client-auth= # Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.server.port.
1129 management.server.ssl.enabled= # Whether to enable SSL support. Requires a custom management.server.port.
1130 management.server.ssl.enabled-protocols= # Enabled SSL protocols. Requires a custom management.server.port.
1131 management.server.ssl.key-alias= # Alias that identifies the key in the key store. Requires a custom management.server.port.
1132 management.server.ssl.key-password= # Password used to access the key in the key store. Requires a custom management.server.port.
1133 management.server.ssl.key-store= # Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.server.port.
1134 management.server.ssl.key-store-password= # Password used to access the key store. Requires a custom management.server.port.
1135 management.server.ssl.key-store-provider= # Provider for the key store. Requires a custom management.server.port.
1136 management.server.ssl.key-store-type= # Type of the key store. Requires a custom management.server.port.
1137 management.server.ssl.protocol=TLS # SSL protocol to use. Requires a custom management.server.port.
1138 management.server.ssl.trust-store= # Trust store that holds SSL certificates. Requires a custom management.server.port.
1139 management.server.ssl.trust-store-password= # Password used to access the trust store. Requires a custom management.server.port.
1140 management.server.ssl.trust-store-provider= # Provider for the trust store. Requires a custom management.server.port.
1141 management.server.ssl.trust-store-type= # Type of the trust store. Requires a custom management.server.port.
1142 
1143 # CLOUDFOUNDRY
1144 management.cloudfoundry.enabled=true # Whether to enable extended Cloud Foundry actuator endpoints.
1145 management.cloudfoundry.skip-ssl-validation=false # Whether to skip SSL verification for Cloud Foundry actuator endpoint security calls.
1146 
1147 # ENDPOINTS GENERAL CONFIGURATION
1148 management.endpoints.enabled-by-default= # Whether to enable or disable all endpoints by default.
1149 
1150 # ENDPOINTS JMX CONFIGURATION (JmxEndpointProperties)
1151 management.endpoints.jmx.domain=org.springframework.boot # Endpoints JMX domain name. Fallback to 'spring.jmx.default-domain' if set.
1152 management.endpoints.jmx.exposure.include=* # Endpoint IDs that should be included or '*' for all.
1153 management.endpoints.jmx.exposure.exclude= # Endpoint IDs that should be excluded or '*' for all.
1154 management.endpoints.jmx.static-names= # Additional static properties to append to all ObjectNames of MBeans representing Endpoints.
1155 management.endpoints.jmx.unique-names=false # Whether to ensure that ObjectNames are modified in case of conflict.
1156 
1157 # ENDPOINTS WEB CONFIGURATION (WebEndpointProperties)
1158 management.endpoints.web.exposure.include=health,info # Endpoint IDs that should be included or '*' for all.
1159 management.endpoints.web.exposure.exclude= # Endpoint IDs that should be excluded or '*' for all.
1160 management.endpoints.web.base-path=/actuator # Base path for Web endpoints. Relative to server.servlet.context-path or management.server.servlet.context-path if management.server.port is configured.
1161 management.endpoints.web.path-mapping= # Mapping between endpoint IDs and the path that should expose them.
1162 
1163 # ENDPOINTS CORS CONFIGURATION (CorsEndpointProperties)
1164 management.endpoints.web.cors.allow-credentials= # Whether credentials are supported. When not set, credentials are not supported.
1165 management.endpoints.web.cors.allowed-headers= # Comma-separated list of headers to allow in a request. '*' allows all headers.
1166 management.endpoints.web.cors.allowed-methods= # Comma-separated list of methods to allow. '*' allows all methods. When not set, defaults to GET.
1167 management.endpoints.web.cors.allowed-origins= # Comma-separated list of origins to allow. '*' allows all origins. When not set, CORS support is disabled.
1168 management.endpoints.web.cors.exposed-headers= # Comma-separated list of headers to include in a response.
1169 management.endpoints.web.cors.max-age=1800s # How long the response from a pre-flight request can be cached by clients. If a duration suffix is not specified, seconds will be used.
1170 
1171 # AUDIT EVENTS ENDPOINT (AuditEventsEndpoint)
1172 management.endpoint.auditevents.cache.time-to-live=0ms # Maximum time that a response can be cached.
1173 management.endpoint.auditevents.enabled=true # Whether to enable the auditevents endpoint.
1174 
1175 # BEANS ENDPOINT (BeansEndpoint)
1176 management.endpoint.beans.cache.time-to-live=0ms # Maximum time that a response can be cached.
1177 management.endpoint.beans.enabled=true # Whether to enable the beans endpoint.
1178 
1179 # CONDITIONS REPORT ENDPOINT (ConditionsReportEndpoint)
1180 management.endpoint.conditions.cache.time-to-live=0ms # Maximum time that a response can be cached.
1181 management.endpoint.conditions.enabled=true # Whether to enable the conditions endpoint.
1182 
1183 # CONFIGURATION PROPERTIES REPORT ENDPOINT (ConfigurationPropertiesReportEndpoint, ConfigurationPropertiesReportEndpointProperties)
1184 management.endpoint.configprops.cache.time-to-live=0ms # Maximum time that a response can be cached.
1185 management.endpoint.configprops.enabled=true # Whether to enable the configprops endpoint.
1186 management.endpoint.configprops.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services,sun.java.command # Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.
1187 
1188 # ENVIRONMENT ENDPOINT (EnvironmentEndpoint, EnvironmentEndpointProperties)
1189 management.endpoint.env.cache.time-to-live=0ms # Maximum time that a response can be cached.
1190 management.endpoint.env.enabled=true # Whether to enable the env endpoint.
1191 management.endpoint.env.keys-to-sanitize=password,secret,key,token,.*credentials.*,vcap_services,sun.java.command # Keys that should be sanitized. Keys can be simple strings that the property ends with or regular expressions.
1192 
1193 # FLYWAY ENDPOINT (FlywayEndpoint)
1194 management.endpoint.flyway.cache.time-to-live=0ms # Maximum time that a response can be cached.
1195 management.endpoint.flyway.enabled=true # Whether to enable the flyway endpoint.
1196 
1197 # HEALTH ENDPOINT (HealthEndpoint, HealthEndpointProperties)
1198 management.endpoint.health.cache.time-to-live=0ms # Maximum time that a response can be cached.
1199 management.endpoint.health.enabled=true # Whether to enable the health endpoint.
1200 management.endpoint.health.roles= # Roles used to determine whether or not a user is authorized to be shown details. When empty, all authenticated users are authorized.
1201 management.endpoint.health.show-details=never # When to show full health details.
1202 
1203 # HEAP DUMP ENDPOINT (HeapDumpWebEndpoint)
1204 management.endpoint.heapdump.cache.time-to-live=0ms # Maximum time that a response can be cached.
1205 management.endpoint.heapdump.enabled=true # Whether to enable the heapdump endpoint.
1206 
1207 # HTTP TRACE ENDPOINT (HttpTraceEndpoint)
1208 management.endpoint.httptrace.cache.time-to-live=0ms # Maximum time that a response can be cached.
1209 management.endpoint.httptrace.enabled=true # Whether to enable the httptrace endpoint.
1210 
1211 # INFO ENDPOINT (InfoEndpoint)
1212 info= # Arbitrary properties to add to the info endpoint.
1213 management.endpoint.info.cache.time-to-live=0ms # Maximum time that a response can be cached.
1214 management.endpoint.info.enabled=true # Whether to enable the info endpoint.
1215 
1216 # JOLOKIA ENDPOINT (JolokiaProperties)
1217 management.endpoint.jolokia.config.*= # Jolokia settings. Refer to the documentation of Jolokia for more details.
1218 management.endpoint.jolokia.enabled=true # Whether to enable the jolokia endpoint.
1219 
1220 # LIQUIBASE ENDPOINT (LiquibaseEndpoint)
1221 management.endpoint.liquibase.cache.time-to-live=0ms # Maximum time that a response can be cached.
1222 management.endpoint.liquibase.enabled=true # Whether to enable the liquibase endpoint.
1223 
1224 # LOG FILE ENDPOINT (LogFileWebEndpoint, LogFileWebEndpointProperties)
1225 management.endpoint.logfile.cache.time-to-live=0ms # Maximum time that a response can be cached.
1226 management.endpoint.logfile.enabled=true # Whether to enable the logfile endpoint.
1227 management.endpoint.logfile.external-file= # External Logfile to be accessed. Can be used if the logfile is written by output redirect and not by the logging system itself.
1228 
1229 # LOGGERS ENDPOINT (LoggersEndpoint)
1230 management.endpoint.loggers.cache.time-to-live=0ms # Maximum time that a response can be cached.
1231 management.endpoint.loggers.enabled=true # Whether to enable the loggers endpoint.
1232 
1233 # REQUEST MAPPING ENDPOINT  (MappingsEndpoint)
1234 management.endpoint.mappings.cache.time-to-live=0ms # Maximum time that a response can be cached.
1235 management.endpoint.mappings.enabled=true # Whether to enable the mappings endpoint.
1236 
1237 # METRICS ENDPOINT (MetricsEndpoint)
1238 management.endpoint.metrics.cache.time-to-live=0ms # Maximum time that a response can be cached.
1239 management.endpoint.metrics.enabled=true # Whether to enable the metrics endpoint.
1240 
1241 # PROMETHEUS ENDPOINT (PrometheusScrapeEndpoint)
1242 management.endpoint.prometheus.cache.time-to-live=0ms # Maximum time that a response can be cached.
1243 management.endpoint.prometheus.enabled=true # Whether to enable the prometheus endpoint.
1244 
1245 # SCHEDULED TASKS ENDPOINT (ScheduledTasksEndpoint)
1246 management.endpoint.scheduledtasks.cache.time-to-live=0ms # Maximum time that a response can be cached.
1247 management.endpoint.scheduledtasks.enabled=true # Whether to enable the scheduledtasks endpoint.
1248 
1249 # SESSIONS ENDPOINT (SessionsEndpoint)
1250 management.endpoint.sessions.enabled=true # Whether to enable the sessions endpoint.
1251 
1252 # SHUTDOWN ENDPOINT (ShutdownEndpoint)
1253 management.endpoint.shutdown.enabled=false # Whether to enable the shutdown endpoint.
1254 
1255 # THREAD DUMP ENDPOINT (ThreadDumpEndpoint)
1256 management.endpoint.threaddump.cache.time-to-live=0ms # Maximum time that a response can be cached.
1257 management.endpoint.threaddump.enabled=true # Whether to enable the threaddump endpoint.
1258 
1259 # HEALTH INDICATORS
1260 management.health.db.enabled=true # Whether to enable database health check.
1261 management.health.cassandra.enabled=true # Whether to enable Cassandra health check.
1262 management.health.couchbase.enabled=true # Whether to enable Couchbase health check.
1263 management.health.couchbase.timeout=1000ms # Timeout for getting the Bucket information from the server.
1264 management.health.defaults.enabled=true # Whether to enable default health indicators.
1265 management.health.diskspace.enabled=true # Whether to enable disk space health check.
1266 management.health.diskspace.path= # Path used to compute the available disk space.
1267 management.health.diskspace.threshold=0 # Minimum disk space, in bytes, that should be available.
1268 management.health.elasticsearch.enabled=true # Whether to enable Elasticsearch health check.
1269 management.health.elasticsearch.indices= # Comma-separated index names.
1270 management.health.elasticsearch.response-timeout=100ms # Time to wait for a response from the cluster.
1271 management.health.influxdb.enabled=true # Whether to enable InfluxDB health check.
1272 management.health.jms.enabled=true # Whether to enable JMS health check.
1273 management.health.ldap.enabled=true # Whether to enable LDAP health check.
1274 management.health.mail.enabled=true # Whether to enable Mail health check.
1275 management.health.mongo.enabled=true # Whether to enable MongoDB health check.
1276 management.health.neo4j.enabled=true # Whether to enable Neo4j health check.
1277 management.health.rabbit.enabled=true # Whether to enable RabbitMQ health check.
1278 management.health.redis.enabled=true # Whether to enable Redis health check.
1279 management.health.solr.enabled=true # Whether to enable Solr health check.
1280 management.health.status.http-mapping= # Mapping of health statuses to HTTP status codes. By default, registered health statuses map to sensible defaults (for example, UP maps to 200).
1281 management.health.status.order=DOWN,OUT_OF_SERVICE,UP,UNKNOWN # Comma-separated list of health statuses in order of severity.
1282 
1283 # HTTP TRACING (HttpTraceProperties)
1284 management.trace.http.enabled=true # Whether to enable HTTP request-response tracing.
1285 management.trace.http.include=request-headers,response-headers,cookies,errors # Items to be included in the trace.
1286 
1287 # INFO CONTRIBUTORS (InfoContributorProperties)
1288 management.info.build.enabled=true # Whether to enable build info.
1289 management.info.defaults.enabled=true # Whether to enable default info contributors.
1290 management.info.env.enabled=true # Whether to enable environment info.
1291 management.info.git.enabled=true # Whether to enable git info.
1292 management.info.git.mode=simple # Mode to use to expose git information.
1293 
1294 # METRICS
1295 management.metrics.binders.files.enabled=true # Whether to enable files metrics.
1296 management.metrics.binders.jvm.enabled=true # Whether to enable JVM metrics.
1297 management.metrics.binders.logback.enabled=true # Whether to enable Logback metrics.
1298 management.metrics.binders.processor.enabled=true # Whether to enable processor metrics.
1299 management.metrics.binders.uptime.enabled=true # Whether to enable uptime metrics.
1300 management.metrics.distribution.percentiles-histogram.*= # Whether meter IDs starting-with the specified name should be publish percentile histograms.
1301 management.metrics.distribution.percentiles.*= # Specific computed non-aggregable percentiles to ship to the backend for meter IDs starting-with the specified name.
1302 management.metrics.distribution.sla.*= # Specific SLA boundaries for meter IDs starting-with the specified name. The longest match wins, the key `all` can also be used to configure all meters.
1303 management.metrics.enable.*= # Whether meter IDs starting-with the specified name should be enabled. The longest match wins, the key `all` can also be used to configure all meters.
1304 management.metrics.export.atlas.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1305 management.metrics.export.atlas.config-refresh-frequency=10s # Frequency for refreshing config settings from the LWC service.
1306 management.metrics.export.atlas.config-time-to-live=150s # Time to live for subscriptions from the LWC service.
1307 management.metrics.export.atlas.config-uri=http://localhost:7101/lwc/api/v1/expressions/local-dev # URI for the Atlas LWC endpoint to retrieve current subscriptions.
1308 management.metrics.export.atlas.connect-timeout=1s # Connection timeout for requests to this backend.
1309 management.metrics.export.atlas.enabled=true # Whether exporting of metrics to this backend is enabled.
1310 management.metrics.export.atlas.eval-uri=http://localhost:7101/lwc/api/v1/evaluate # URI for the Atlas LWC endpoint to evaluate the data for a subscription.
1311 management.metrics.export.atlas.lwc-enabled=false # Whether to enable streaming to Atlas LWC.
1312 management.metrics.export.atlas.meter-time-to-live=15m # Time to live for meters that do not have any activity. After this period the meter will be considered expired and will not get reported.
1313 management.metrics.export.atlas.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1314 management.metrics.export.atlas.read-timeout=10s # Read timeout for requests to this backend.
1315 management.metrics.export.atlas.step=1m # Step size (i.e. reporting frequency) to use.
1316 management.metrics.export.atlas.uri=http://localhost:7101/api/v1/publish # URI of the Atlas server.
1317 management.metrics.export.datadog.api-key= # Datadog API key.
1318 management.metrics.export.datadog.application-key= # Datadog application key. Not strictly required, but improves the Datadog experience by sending meter descriptions, types, and base units to Datadog.
1319 management.metrics.export.datadog.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1320 management.metrics.export.datadog.connect-timeout=1s # Connection timeout for requests to this backend.
1321 management.metrics.export.datadog.descriptions=true # Whether to publish descriptions metadata to Datadog. Turn this off to minimize the amount of metadata sent.
1322 management.metrics.export.datadog.enabled=true # Whether exporting of metrics to this backend is enabled.
1323 management.metrics.export.datadog.host-tag=instance # Tag that will be mapped to "host" when shipping metrics to Datadog.
1324 management.metrics.export.datadog.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1325 management.metrics.export.datadog.read-timeout=10s # Read timeout for requests to this backend.
1326 management.metrics.export.datadog.step=1m # Step size (i.e. reporting frequency) to use.
1327 management.metrics.export.datadog.uri=https://app.datadoghq.com # URI to ship metrics to. If you need to publish metrics to an internal proxy en-route to Datadog, you can define the location of the proxy with this.
1328 management.metrics.export.ganglia.addressing-mode=multicast # UDP addressing mode, either unicast or multicast.
1329 management.metrics.export.ganglia.duration-units=milliseconds # Base time unit used to report durations.
1330 management.metrics.export.ganglia.enabled=true # Whether exporting of metrics to Ganglia is enabled.
1331 management.metrics.export.ganglia.host=localhost # Host of the Ganglia server to receive exported metrics.
1332 management.metrics.export.ganglia.port=8649 # Port of the Ganglia server to receive exported metrics.
1333 management.metrics.export.ganglia.protocol-version=3.1 # Ganglia protocol version. Must be either 3.1 or 3.0.
1334 management.metrics.export.ganglia.rate-units=seconds # Base time unit used to report rates.
1335 management.metrics.export.ganglia.step=1m # Step size (i.e. reporting frequency) to use.
1336 management.metrics.export.ganglia.time-to-live=1 # Time to live for metrics on Ganglia. Set the multi-cast Time-To-Live to be one greater than the number of hops (routers) between the hosts.
1337 management.metrics.export.graphite.duration-units=milliseconds # Base time unit used to report durations.
1338 management.metrics.export.graphite.enabled=true # Whether exporting of metrics to Graphite is enabled.
1339 management.metrics.export.graphite.host=localhost # Host of the Graphite server to receive exported metrics.
1340 management.metrics.export.graphite.port=2004 # Port of the Graphite server to receive exported metrics.
1341 management.metrics.export.graphite.protocol=pickled # Protocol to use while shipping data to Graphite.
1342 management.metrics.export.graphite.rate-units=seconds # Base time unit used to report rates.
1343 management.metrics.export.graphite.step=1m # Step size (i.e. reporting frequency) to use.
1344 management.metrics.export.graphite.tags-as-prefix= # For the default naming convention, turn the specified tag keys into part of the metric prefix.
1345 management.metrics.export.influx.auto-create-db=true # Whether to create the Influx database if it does not exist before attempting to publish metrics to it.
1346 management.metrics.export.influx.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1347 management.metrics.export.influx.compressed=true # Whether to enable GZIP compression of metrics batches published to Influx.
1348 management.metrics.export.influx.connect-timeout=1s # Connection timeout for requests to this backend.
1349 management.metrics.export.influx.consistency=one # Write consistency for each point.
1350 management.metrics.export.influx.db=mydb # Tag that will be mapped to "host" when shipping metrics to Influx.
1351 management.metrics.export.influx.enabled=true # Whether exporting of metrics to this backend is enabled.
1352 management.metrics.export.influx.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1353 management.metrics.export.influx.password= # Login password of the Influx server.
1354 management.metrics.export.influx.read-timeout=10s # Read timeout for requests to this backend.
1355 management.metrics.export.influx.retention-duration= # Time period for which Influx should retain data in the current database.
1356 management.metrics.export.influx.retention-shard-duration= # Time range covered by a shard group.
1357 management.metrics.export.influx.retention-policy= # Retention policy to use (Influx writes to the DEFAULT retention policy if one is not specified).
1358 management.metrics.export.influx.retention-replication-factor= # How many copies of the data are stored in the cluster.
1359 management.metrics.export.influx.step=1m # Step size (i.e. reporting frequency) to use.
1360 management.metrics.export.influx.uri=http://localhost:8086 # URI of the Influx server.
1361 management.metrics.export.influx.user-name= # Login user of the Influx server.
1362 management.metrics.export.jmx.domain=metrics # Metrics JMX domain name.
1363 management.metrics.export.jmx.enabled=true # Whether exporting of metrics to JMX is enabled.
1364 management.metrics.export.jmx.step=1m # Step size (i.e. reporting frequency) to use.
1365 management.metrics.export.newrelic.account-id= # New Relic account ID.
1366 management.metrics.export.newrelic.api-key= # New Relic API key.
1367 management.metrics.export.newrelic.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1368 management.metrics.export.newrelic.connect-timeout=1s # Connection timeout for requests to this backend.
1369 management.metrics.export.newrelic.enabled=true # Whether exporting of metrics to this backend is enabled.
1370 management.metrics.export.newrelic.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1371 management.metrics.export.newrelic.read-timeout=10s # Read timeout for requests to this backend.
1372 management.metrics.export.newrelic.step=1m # Step size (i.e. reporting frequency) to use.
1373 management.metrics.export.newrelic.uri=https://insights-collector.newrelic.com # URI to ship metrics to.
1374 management.metrics.export.prometheus.descriptions=true # Whether to enable publishing descriptions as part of the scrape payload to Prometheus. Turn this off to minimize the amount of data sent on each scrape.
1375 management.metrics.export.prometheus.enabled=true # Whether exporting of metrics to Prometheus is enabled.
1376 management.metrics.export.prometheus.step=1m # Step size (i.e. reporting frequency) to use.
1377 management.metrics.export.signalfx.access-token= # SignalFX access token.
1378 management.metrics.export.signalfx.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1379 management.metrics.export.signalfx.connect-timeout=1s # Connection timeout for requests to this backend.
1380 management.metrics.export.signalfx.enabled=true # Whether exporting of metrics to this backend is enabled.
1381 management.metrics.export.signalfx.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1382 management.metrics.export.signalfx.read-timeout=10s # Read timeout for requests to this backend.
1383 management.metrics.export.signalfx.source= # Uniquely identifies the app instance that is publishing metrics to SignalFx. Defaults to the local host name.
1384 management.metrics.export.signalfx.step=10s # Step size (i.e. reporting frequency) to use.
1385 management.metrics.export.signalfx.uri=https://ingest.signalfx.com # URI to ship metrics to.
1386 management.metrics.export.simple.enabled=true # Whether, in the absence of any other exporter, exporting of metrics to an in-memory backend is enabled.
1387 management.metrics.export.simple.mode=cumulative # Counting mode.
1388 management.metrics.export.simple.step=1m # Step size (i.e. reporting frequency) to use.
1389 management.metrics.export.statsd.enabled=true # Whether exporting of metrics to StatsD is enabled.
1390 management.metrics.export.statsd.flavor=datadog # StatsD line protocol to use.
1391 management.metrics.export.statsd.host=localhost # Host of the StatsD server to receive exported metrics.
1392 management.metrics.export.statsd.max-packet-length=1400 # Total length of a single payload should be kept within your network's MTU.
1393 management.metrics.export.statsd.polling-frequency=10s # How often gauges will be polled. When a gauge is polled, its value is recalculated and if the value has changed (or publishUnchangedMeters is true), it is sent to the StatsD server.
1394 management.metrics.export.statsd.port=8125 # Port of the StatsD server to receive exported metrics.
1395 management.metrics.export.statsd.publish-unchanged-meters=true # Whether to send unchanged meters to the StatsD server.
1396 management.metrics.export.wavefront.api-token= # API token used when publishing metrics directly to the Wavefront API host.
1397 management.metrics.export.wavefront.batch-size=10000 # Number of measurements per request to use for this backend. If more measurements are found, then multiple requests will be made.
1398 management.metrics.export.wavefront.connect-timeout=1s # Connection timeout for requests to this backend.
1399 management.metrics.export.wavefront.enabled=true # Whether exporting of metrics to this backend is enabled.
1400 management.metrics.export.wavefront.global-prefix= # Global prefix to separate metrics originating from this app's white box instrumentation from those originating from other Wavefront integrations when viewed in the Wavefront UI.
1401 management.metrics.export.wavefront.num-threads=2 # Number of threads to use with the metrics publishing scheduler.
1402 management.metrics.export.wavefront.read-timeout=10s # Read timeout for requests to this backend.
1403 management.metrics.export.wavefront.source= # Unique identifier for the app instance that is the source of metrics being published to Wavefront. Defaults to the local host name.
1404 management.metrics.export.wavefront.step=10s # Step size (i.e. reporting frequency) to use.
1405 management.metrics.export.wavefront.uri=https://longboard.wavefront.com # URI to ship metrics to.
1406 management.metrics.use-global-registry=true # Whether auto-configured MeterRegistry implementations should be bound to the global static registry on Metrics.
1407 management.metrics.web.client.max-uri-tags=100 # Maximum number of unique URI tag values allowed. After the max number of tag values is reached, metrics with additional tag values are denied by filter.
1408 management.metrics.web.client.requests-metric-name=http.client.requests # Name of the metric for sent requests.
1409 management.metrics.web.server.auto-time-requests=true # Whether requests handled by Spring MVC or WebFlux should be automatically timed.
1410 management.metrics.web.server.max-uri-tags=100 # Maximum number of unique URI tag values allowed. After the max number of tag values is reached, metrics with additional tag values are denied by filter.
1411 management.metrics.web.server.requests-metric-name=http.server.requests # Name of the metric for received requests.
1412 
1413 
1414 # ----------------------------------------
1415 # DEVTOOLS PROPERTIES
1416 # ----------------------------------------
1417 
1418 # DEVTOOLS (DevToolsProperties)
1419 spring.devtools.livereload.enabled=true # Whether to enable a livereload.com-compatible server.
1420 spring.devtools.livereload.port=35729 # Server port.
1421 spring.devtools.restart.additional-exclude= # Additional patterns that should be excluded from triggering a full restart.
1422 spring.devtools.restart.additional-paths= # Additional paths to watch for changes.
1423 spring.devtools.restart.enabled=true # Whether to enable automatic restart.
1424 spring.devtools.restart.exclude=META-INF/maven/**,META-INF/resources/**,resources/**,static/**,public/**,templates/**,**/*Test.class,**/*Tests.class,git.properties,META-INF/build-info.properties # Patterns that should be excluded from triggering a full restart.
1425 spring.devtools.restart.log-condition-evaluation-delta=true # Whether to log the condition evaluation delta upon restart.
1426 spring.devtools.restart.poll-interval=1s # Amount of time to wait between polling for classpath changes.
1427 spring.devtools.restart.quiet-period=400ms # Amount of quiet time required without any classpath changes before a restart is triggered.
1428 spring.devtools.restart.trigger-file= # Name of a specific file that, when changed, triggers the restart check. If not specified, any classpath file change triggers the restart.
1429 
1430 # REMOTE DEVTOOLS (RemoteDevToolsProperties)
1431 spring.devtools.remote.context-path=/.~~spring-boot!~ # Context path used to handle the remote connection.
1432 spring.devtools.remote.proxy.host= # The host of the proxy to use to connect to the remote application.
1433 spring.devtools.remote.proxy.port= # The port of the proxy to use to connect to the remote application.
1434 spring.devtools.remote.restart.enabled=true # Whether to enable remote restart.
1435 spring.devtools.remote.secret= # A shared secret required to establish a connection (required to enable remote support).
1436 spring.devtools.remote.secret-header-name=X-AUTH-TOKEN # HTTP header used to transfer the shared secret.
1437 
1438 
1439 # ----------------------------------------
1440 # TESTING PROPERTIES
1441 # ----------------------------------------
1442 
1443 spring.test.database.replace=any # Type of existing DataSource to replace.
1444 spring.test.mockmvc.print=default # MVC Print option.
全局默认配置

五:starter pom

参考文档

spring-boot-starterspringboot核心starter ,包括自动配置,日志,yaml配置文件的支持 
spring-boot-starter-actuator准生产特性,用来监控和管理应用
spring-boot-starter-remote-shell提供基于ssh协议的监控和管理
spring-boot-starter-amqp使用spring-rabbit支持AMQP
spring-boot-starter-aop使用AOP和AspectJ支持面向切面编程
spring-boot-starter-batch对springBatch支持
spring-boot-starter-cache对SpringCache抽象的支持
spring-boot-starter-cloud-connectors对云平台(Cloud Foundry ,Heroku)提供的服务简化的连接方式
spring-boot-starter-data-elasticsearch对spring-data-elasticsearch的支持
spring-boot-starter-data-gemfire对分布式存储GemFire的支持
spring-boot-starter-data-jpa对jpa的支持,包括spring-data-jap,spring-orm,Hibernate
spring-boot-starter-data-mongodb通过spring-data-mongodb对mongodb的支持
spring-boot-starter-data-rest通过spring-data-rest-webmvc对spring Data reposity暴露为REST形式的服务
spring-boot-starter-data-solr通过spring-data-solr对Apache Solr的支持
spring-boot-starter-data-freemaker对Freemaker的支持
spring-boot-starter-data-groovy-templates对Groovy模版引擎的支持
spring-boot-starter-hateoas通过spring-hateoas对基于HATEOAS的REST形式的网络服务的支持
spring-boot-starter-hornetq通过HornetQ对JMS的支持
spring-boot-starter-integration对系统集成框架spring-integration的支持
spring-boot-starter-jdbc对JDBC数据库的支持
spring-boot-starter-jersey对Jersey REST形式的网络服务的支持
spring-boot-starter-jta-atomikos通过Atomikos对分布式事物的支持
spring-boot-starter-jta-bitronix通过Bitronix对分布式事物的支持
spring-boot-starter-mail对spring mail的支持
spring-boot-starter-mobile对spring mobile的支持
spring-boot-starter-mustache对Mustache模版引擎的支持
spring-boot-starter-redis对键值对内存数据库Redis的支持,包含spring-redis
spring-boot-starter-security对spring-security的支持
spring-boot-starter-social-facebook通过spring-social-facebook 对facebook的支持
spring-boot-starter-social-twitter通过spring-social-twitter 对twitter的支持
spring-boot-starter-social-linkedin通过spring-social-linkedin 对linkedin的支持
spring-boot-starter-thymeleaf对Thymeleaf模版引擎的支持,包含于spring的整合配置
spring-boot-starter-velocity对velocity模版引擎的支持
spring-boot-starter-web对web项目开发的支持,包含tomcat和spring-webmvc
spring-boot-starter-Tomcatspringboot默认容器tomcat
spring-boot-starter-Jettyjetty容器
spring-boot-starter-undertowUndertow容器
spring-boot-starter-logging默认日志输出框架Logback
spring-boot-starter-log4j支持log4j
spring-boot-starter-websocketwebsocket的支持
spring-boot-starter-ws

spring webservice的支持

六:获取在全局配置文件(application.properties)自定义配置的值

6.1 在属性上添加@Value("${key}")来获取相应的值

如:

1 book.author=tom
2 book.name=SpringBoot
application.properties
 1 package com.wu.controller;
 2 
 3 import java.awt.print.Book;
 4 
 5 import org.omg.CORBA.PRIVATE_MEMBER;
 6 import org.springframework.beans.factory.annotation.Value;
 7 import org.springframework.boot.SpringApplication;
 8 import org.springframework.boot.autoconfigure.EnableAutoConfiguration;
 9 import org.springframework.stereotype.Controller;
10 import org.springframework.web.bind.annotation.RequestMapping;
11 import org.springframework.web.bind.annotation.ResponseBody;
12 @EnableAutoConfiguration
13 @Controller
14 public class getValueFromApplication {
15     @Value("${book.author}")
16     private String author;
17     @Value("${book.name}")
18     private String name;
19     @RequestMapping("/book")
20     @ResponseBody
21     public String getValue(){
22         return author+" "+name;
23     }
24     
25     //入口
26     public static void main(String []args){
27         SpringApplication.run(getValueFromApplication.class, args);
28     }
29 }
getValueFromApplication

运行之后结构为:

6.2 在类上添加@ConfigurationProperties()

优点: 当属性过多时,不用在每个需要获取的属性上面添加@Valuc(),只需在类上添加

注意:需要为每个属性设置get/set方法

示例:

在application.properties中将book.author改为curry

 1 package com.wu.controller;
 2 
 3 import java.awt.print.Book;
 4 
 5 import org.omg.CORBA.PRIVATE_MEMBER;
 6 import org.springframework.beans.factory.annotation.Value;
 7 import org.springframework.boot.SpringApplication;
 8 import org.springframework.boot.autoconfigure.EnableAutoConfiguration;
 9 import org.springframework.boot.context.properties.ConfigurationProperties;
10 import org.springframework.stereotype.Controller;
11 import org.springframework.web.bind.annotation.RequestMapping;
12 import org.springframework.web.bind.annotation.ResponseBody;
13 
14 @ConfigurationProperties(prefix="book")
15 @EnableAutoConfiguration
16 @Controller
17 public class getValueFromApplication {
18     //@Value("${book.author}")
19     private String author;
20     //@Value("${book.name}")
21     private String name;
22     
23     @RequestMapping("/book")
24     @ResponseBody
25     public String getValue(){
26         return author+" "+name;
27     }
28     
29     public String getAuthor() {
30         return author;
31     }
32 
33     public void setAuthor(String author) {
34         this.author = author;
35     }
36 
37     public String getName() {
38         return name;
39     }
40 
41     public void setName(String name) {
42         this.name = name;
43     }
44 
45     //入口
46     public static void main(String []args){
47         SpringApplication.run(getValueFromApplication.class, args);
48     }
49 }
类型安全的配置

运行结构为:

 七:Profile配置

Profile可以对不同环境对不同配置提供支持,如有多个application-xxx.properties,则在application.properties中配置 spring.profiles.active=xxx 来指定需要活动的配置文件

示例:

1 server.port=8888
application-dev.properties
1 server.port=9999
application-sit.properties
1 book.author=curry
2 book.name=SpringBoot
3 #指定活动的配置文件
4 spring.profiles.active=dev
application.properties

再次启动即可在控制台中发现更改不同的配置文件有不同的端口号

 八:SpringBoot自动配置原理

参考文档1文档2

简单描述:通过加载META-INF/spring.factories中类的路径去实例化需要的类

1.启动类里面调用SpringApplication.run(xxx.class,args)方法

2.在SpringApplicaiton的run方法中有两个步骤,首先创建SpringApplicaiton对象,然后再调用run方法。
3.在SpringApplicaiton构造器中调用initialize(sources)方法。
4.initialize方法中,
  a.将sources转换成list加到this.sources属性中
  b.判断是否为web环境(在类路径下是否可以加载到Servlet和ConfigurableWebApplicationContext)
  c.加载Initializers(通过META-INF/spring.factories中键为ApplicationContextInitializer的配置进行加载),dubug发现一共
     加载了6个initializer(spring-boot-1.5.10.RELEASE.jar中4个,spring-boot-autoconfigure-1.5.10.RELEASE.jar中2个)
  d.加载ApplicationListener(也是通过META-INF/spring.factories),debug发现共加载了10个
  e.通过寻找main方法找到启动主类。
5.run方法中
  a.StopWatch主要是监控启动过程,统计启动时间,检测应用是否已经启动或者停止。
  b.加载SpringApplicationRunListener(也是通过META-INF/spring.factories),默认加载的是EventPublishingRunListener
  c.调用RunListener.starting()方法。
  d.根据args创建应用参数解析器ApplicationArguments;
  e.准备环境变量:获取环境变量environment,将应用参数放入到环境变量持有对象中,监听器监听环境变量对象的变化(listener.environmentPrepared)
  f.打印Banner信息(SpringBootBanner)
  g.创建SpringBoot的应用上下文(AnnotationConfigEmbeddedWebApplicationContext)
  h.prepareContext上下文之前的准备
  i.refreshContext刷新上下文
  j.afterRefresh(ApplicationRunner,CommandLineRunner接口实现类的启动)
  k.返回上下文对象

 

转载于:https://www.cnblogs.com/wuba/p/11217199.html

Logo

权威|前沿|技术|干货|国内首个API全生命周期开发者社区

更多推荐