Prequisite:

1) Make sure your host O/S does not have it mounted or loaded.

2) use fdisk -l look The usb device was mounted or not.

3)mkdir /mnt/usb

4)mount /dev/sd(a,b,c)(1,2,3) /mnt/usb


note: Make sure /proc/bus/usb is mounted as filesystem type usbfs.
# mount -t usbfs none /proc/bus/usb

notes1: On Linux hosts, VMware Workstation uses the USB device file system to connect to USB devices. In most Linux systems that support USB, the USB device file system is at
/proc/bus/usb.
If your host operating system uses a different path to the USB device file system, run the following command as root to mount the file system to the expected location:
mount -t usbfs none /proc/bus/usb


notes2: In VMware, Edit the virtual machine settings-> Add a usb controller-> Rebooting the virtual machine-> Enable(load) the usb device in "VM"-"Removable Devices"-"USB deivces"

This will be extremely useful since the MultiClamp is connected through usb port and we can use some portable hard drive with the virtual machine to pass the data to the host machine

 

# linux
Logo
Linux

更多推荐

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

avatar Linux

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具；    1.1 mii-tool 介绍；    mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

avatar Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

<br />　　Linux系统下超级终端Minicom的使用方法 <br />　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： <br />　　1． 启动minicom <br />　　以root权限登录系统 <br />　　使用命令 <br />　　minicom –s 则minicom启动，屏

avatar Linux