Docker安装多主多备rocketMQ集群之Docker-compose方式

本人是在一台虚拟机上搭建的，如果是生产部署请做相应的修改！！！目录一、安装docker-compose二、安装rocketmq配置文件yml配置文件三、安装成功一、安装docker-compose假设你电脑已经安装了docker了，如果没有请转Docker的入门以及简单应用的安装_熟透的蜗牛的博客-CSDN博客1、下载docker-compose[root@bogon ~]# sudo curl

熟透的蜗牛

1930人浏览 · 2021-11-14 17:18:21

熟透的蜗牛 · 2021-11-14 17:18:21 发布

本人是在一台虚拟机上搭建的，如果是生产部署请做相应的修改！！！

一、安装docker-compose

假设你电脑已经安装了docker了，如果没有请转Docker的入门以及简单应用的安装_熟透的蜗牛的博客-CSDN博客

1、下载docker-compose

[root@bogon ~]# sudo curl -L "https://github.com/docker/compose/releases/download/1.29.2/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

2、授权

[root@bogon ~]# sudo chmod +x /usr/local/bin/docker-compose

3、检测是否安装成功

[root@bogon bin]# docker-compose --version或者docker-compose -v

4、卸载

[root@bogon bin]# sudo rm /usr/local/bin/docker-compose

二、安装rocketmq

配置文件

1、创建配置文件目录

mkdir -p /data/rocketmq/{logs-nameserver-m,logs-nameserver-s,logs-a,logs-a-s,logs-b,logs-b-s,store-a,store-a-s,store-b,store-b-s,conf}

2、broker-a.conf

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#所属集群名字，同一个集群名字相同
brokerClusterName=rocketmq-cluster
#broker名字
brokerName=broker-a
#0表示master >0 表示slave
brokerId=0
#删除文件的时间点，凌晨4点
deleteWhen=04
#文件保留时间 默认是48小时
fileReservedTime=168
#异步复制Master
brokerRole=ASYNC_MASTER
#刷盘方式，ASYNC_FLUSH=异步刷盘，SYNC_FLUSH=同步刷盘 
flushDiskType=ASYNC_FLUSH
#Broker 对外服务的监听端口
listenPort=10911
#nameServer地址，这里nameserver是单台，如果nameserver是多台集群的话，就用分号分割（即namesrvAddr=ip1:port1;ip2:port2;ip3:port3）
namesrvAddr=192.168.139.156:9876;192.168.139.156:9877
#每个topic对应队列的数量，默认为4，实际应参考consumer实例的数量，值过小不利于consumer负载均衡
defaultTopicQueueNums=8
#是否允许 Broker 自动创建Topic，生产建议关闭
autoCreateTopicEnable=true
#是否允许 Broker 自动创建订阅组，生产建议关闭
autoCreateSubscriptionGroup=true
#设置BrokerIP
brokerIP1=192.168.139.156

3、broker-b.conf

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#所属集群名字
brokerClusterName=rocketmq-cluster
#broker名字，注意此处不同的配置文件填写的不一样  例如：在a.properties 文件中写 broker-a  在b.properties 文件中写 broker-b
brokerName=broker-b
#0 表示 Master，>0 表示 Slave
brokerId=0
#删除文件时间点，默认凌晨 4点
deleteWhen=04
#文件保留时间，默认 48 小时
fileReservedTime=168
#Broker 的角色，ASYNC_MASTER=异步复制Master，SYNC_MASTER=同步双写Master，SLAVE=slave节点
brokerRole=ASYNC_MASTER
#刷盘方式，ASYNC_FLUSH=异步刷盘，SYNC_FLUSH=同步刷盘 
flushDiskType=SYNC_FLUSH
#Broker 对外服务的监听端口
listenPort=11911
#nameServer地址，这里nameserver是单台，如果nameserver是多台集群的话，就用分号分割（即namesrvAddr=ip1:port1;ip2:port2;ip3:port3）
namesrvAddr=192.168.139.156:9876;192.168.139.156:9877
#每个topic对应队列的数量，默认为4，实际应参考consumer实例的数量，值过小不利于consumer负载均衡
defaultTopicQueueNums=8
#是否允许 Broker 自动创建Topic，生产建议关闭
autoCreateTopicEnable=true
#是否允许 Broker 自动创建订阅组，生产建议关闭
autoCreateSubscriptionGroup=true
#设置BrokerIP
brokerIP1=192.168.139.156

4、broker-a-s.conf

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#所属集群名字
brokerClusterName=rocketmq-cluster
#broker名字，注意此处不同的配置文件填写的不一样  例如：在a.properties 文件中写 broker-a  在b.properties 文件中写 broker-b
brokerName=broker-a
#0 表示 Master，>0 表示 Slave
brokerId=1
#删除文件时间点，默认凌晨 4点
deleteWhen=04
#文件保留时间，默认 48 小时
fileReservedTime=168
#Broker 的角色，ASYNC_MASTER=异步复制Master，SYNC_MASTER=同步双写Master，SLAVE=slave节点
brokerRole=SLAVE
#刷盘方式，ASYNC_FLUSH=异步刷盘，SYNC_FLUSH=同步刷盘 
flushDiskType=SYNC_FLUSH
#Broker 对外服务的监听端口
listenPort=12911
#nameServer地址，这里nameserver是单台，如果nameserver是多台集群的话，就用分号分割（即namesrvAddr=ip1:port1;ip2:port2;ip3:port3）
namesrvAddr=192.168.139.156:9876;192.168.139.156:9877
#每个topic对应队列的数量，默认为4，实际应参考consumer实例的数量，值过小不利于consumer负载均衡
defaultTopicQueueNums=8
#是否允许 Broker 自动创建Topic，生产建议关闭
autoCreateTopicEnable=true
#是否允许 Broker 自动创建订阅组，生产建议关闭
autoCreateSubscriptionGroup=true
#设置BrokerIP
brokerIP1=192.168.139.156

5、broker-b-s.conf

# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements.  See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License.  You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
brokerClusterName=rocketmq-cluster
brokerName=broker-b
#slave
brokerId=1
deleteWhen=04
fileReservedTime=168
brokerRole=SLAVE
flushDiskType=ASYNC_FLUSH
#Broker 对外服务的监听端口
listenPort=13911
#nameServer地址，这里nameserver是单台，如果nameserver是多台集群的话，就用分号分割（即namesrvAddr=ip1:port1;ip2:port2;ip3:port3）
namesrvAddr=192.168.139.156:9876;192.168.139.156:9877
#每个topic对应队列的数量，默认为4，实际应参考consumer实例的数量，值过小不利于consumer负载均衡
defaultTopicQueueNums=8
#是否允许 Broker 自动创建Topic，生产建议关闭
autoCreateTopicEnable=true
#是否允许 Broker 自动创建订阅组，生产建议关闭
autoCreateSubscriptionGroup=true
#设置BrokerIP
brokerIP1=192.168.139.156

yml配置文件

1、创建目录存放docker-compose.yml

[root@bogon ~]# mkdir -p /usr/local/docker-compose/rocketmq

2、vi docker-compose.yml 如下内容

version: '2'
services:
  namesrv1:
    image: foxiswho/rocketmq:4.8.0
    container_name: rmqnamesrv1
    ports:
      - 9876:9876
    volumes:
      - /data/rocketmq/logs-nameserver-m:/home/rocketmq/logs
    environment:
      JAVA_OPT_EXT: -server -Xms256M -Xmx256M -Xmn128m
    command: sh mqnamesrv
  namesrv2:
    image: foxiswho/rocketmq:4.8.0
    container_name: rmqnamesrv2
    ports:
      - 9877:9877
    volumes:
      - /data/rocketmq/logs-nameserver-s:/home/rocketmq/logs
    environment:
      JAVA_OPT_EXT: -server -Xms256M -Xmx256M -Xmn128m
    command: sh mqnamesrv
  broker-a-m:
      image: foxiswho/rocketmq:4.8.0
      container_name: rmqbroker-a-master
      ports:
        - 10909:10909
        - 10911:10911
        - 10912:10912
      volumes:
      - /data/rocketmq/logs-a:/home/rocketmq/logs
      - /data/rocketmq/store-a:/home/rocketmq/store
      - /data/rocketmq/conf/broker-a.conf:/home/rocketmq/rocketmq-4.8.0/conf/broker.conf
      environment:
        JAVA_OPT_EXT: -server -Xms256m -Xmx256m -Xmn128m
        NAMESRV_ADDR: 192.168.139.156:9876;192.168.139.156:9877
      command: sh mqbroker  -c /home/rocketmq/rocketmq-4.8.0/conf/broker.conf
  broker-b-m:
    image: foxiswho/rocketmq:4.8.0
    container_name: rmqbroker-b-master
    ports:
      - 11909:11909
      - 11911:11911
      - 11912:11912
    volumes:
    - /data/rocketmq/logs-b:/home/rocketmq/logs
    - /data/rocketmq/store-b:/home/rocketmq/store
    - /data/rocketmq/conf/broker-b.conf:/home/rocketmq/rocketmq-4.8.0/conf/broker.conf
    environment:
      JAVA_OPT_EXT: -server -Xms256m -Xmx256m -Xmn128m
      NAMESRV_ADDR: 192.168.139.156:9876;192.168.139.156:9877
    command: sh mqbroker  -c /home/rocketmq/rocketmq-4.8.0/conf/broker.conf
  broker-a-s:
    image: foxiswho/rocketmq:4.8.0
    container_name: rmqbroker-a-slave
    ports:
      - 12909:12909
      - 12911:12911
      - 12912:12912
    volumes:
      - /data/rocketmq/logs-a-s:/home/rocketmq/logs
      - /data/rocketmq/store-a-s:/home/rocketmq/store
      - /data/rocketmq/conf/broker-a-s.conf:/home/rocketmq/rocketmq-4.8.0/conf/broker.conf
    environment:
      JAVA_OPT_EXT: -server -Xms256m -Xmx256m -Xmn128m
      NAMESRV_ADDR: 192.168.139.156:9876;192.168.139.156:9877
    command: sh mqbroker  -c /home/rocketmq/rocketmq-4.8.0/conf/broker.conf
  broker-b-s:
    image: foxiswho/rocketmq:4.8.0
    container_name: rmqbroker-b-slave
    ports:
      - 13909:13909
      - 13911:13911
      - 13912:13912
    volumes:
      - /data/rocketmq/logs-b-s:/home/rocketmq/logs
      - /data/rocketmq/store-b-s:/home/rocketmq/store
      - /data/rocketmq/conf/broker-b-s.conf:/home/rocketmq/rocketmq-4.8.0/conf/broker.conf
    environment:
      JAVA_OPT_EXT: -server -Xms256m -Xmx256m -Xmn128m
      NAMESRV_ADDR: 192.168.139.156:9876;192.168.139.156:9877
    command: sh mqbroker  -c /home/rocketmq/rocketmq-4.8.0/conf/broker.conf
    depends_on:
      - namesrv1
      - namesrv2

注意：yml文件格式一定要写对，建议修改完成之后在线校验一下。一定要对新建的存储目录和配置文件chmod 777授权，否则启动不起来！！！

3、启动

在docker-compose.yml的目录下启动

docker-compose up
#后台启动
docker-compose up -d

三、安装成功

端口号说明

listenPort参数是broker的监听端口号，是remotingServer服务组件使用，作为对Producer和Consumer提供服务的端口号，默认为10911。
fastListenPort参数是fastRemotingServer服务组件使用，默认为listenPort - 2，#主要用于slave同步master ，fastListenPort=10909。
haListenPort参数是HAService服务组件使用，用于Broker的主从同步，默认为listenPort - 1， haService中使用 haListenPort=10912

向您推荐>>Eolink开发者社区

权威｜前沿｜技术｜干货｜国内首个API全生命周期开发者社区

更多推荐

ELK实现containerd的容器日志采集展示【基于logging的全栈监测】

企业级ELK Stack构建介绍

云原生

深入理解 Mocha 测试框架：从零实现一个 Mocha

前言什么是自动化测试自动化测试在很多团队中都是Devops环节中很难执行起来的一个环节，主要原因在于测试代码的编写工作很难抽象，99%的场景都需要和业务强绑定，而且写测试代码的编写工作量往往比编写实际业务代码的工作量更多。在一些很多业务场景中投入产出比很低，适合写自动化测试的应该是那些中长期业务以及一些诸如组件一样的基础库。自动化测试是个比较大的概念，其中分类也比较多，比如单元测试，端对端测试，集

云原生

(20200916 Solved)docker-compose up创建容器自动退出

问题描述如题，创建容器后自动退出了。并且docker start container无效解决方案原因是缺失了控制终端的配置，需要在docker-compose.yml中增加tty:true ，有时候这样也不行，需要再增加一个command:/bin/bash，命令不一定是这个，需要是一个不会退出的命令，然后用-d后台启动容器。Referencesdocker-compose启动容器后自动退出...