本文章仅作为个人笔记

k8s官方安装文档
  • 关闭selinux swap 防火墙等,不安全,有自我见解者可略过

      setenforce 0
      sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config
      iptables -F
      iptables -X
      systemctl stop firewalld
      swapoff -a
      sed -i "s/\/dev\/mapper\/centos-swap/\#\/dev\/mapper\/centos-swap/g" /etc/fstab
      cat <<EOF >  /etc/sysctl.d/k8s.conf
      net.bridge.bridge-nf-call-ip6tables = 1
      net.bridge.bridge-nf-call-iptables = 1
      EOF
      sysctl --system
    
  • docker 安装(已安装可不处理)

      yum install -y yum-utils dnf
      yum-config-manager --add-repo https://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo
      dnf install -y https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.13-3.1.el7.x86_64.rpm
      yum install docker-ce -y
      service docker start
      # 修改国内仓库,不需要可略过
      vim /etc/docker/daemon.json
      
      	{
      		"registry-mirrors": [
      			"https://registry.docker-cn.com"
      		],
       		"exec-opts":["native.cgroupdriver=systemd"]
      	}
      
      systemctl daemon-reload
      service docker restart
    
  • kubernetes 安装(主从节点都运行)

      cat <<EOF > /etc/yum.repos.d/kubernetes.repo
      [kubernetes]
      name=Kubernetes
      baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
      enabled=1
      gpgcheck=1
      repo_gpgcheck=1
      gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
      EOF
      yum install -y kubelet kubeadm kubectl --disableexcludes=kubernetes
      systemctl enable --now kubelet
      service kubelet start
      modprobe br_netfilter
      lsmod | grep br_netfilter
      # 测试环境是否ok
      kubeadm config images pull
      # 查看kubernetes版本
      kubeadm version
      # 配置安装插件版本 例如( kubeadm config images list --kubernetes-version v1.19.0 )
      kubeadm config images list --kubernetes-version <kubeadm_git_version>
      # 如果是国内服务器构建请务必操作曲线救国,否则请无视
      ## 曲线救国--------------------start
      # 曲线救国,创建国内镜像 [参考](https://blog.csdn.net/sjyu_ustc/article/details/79990858)
      # 查看需要的镜像及版本(这里是个人安装时的版本,因时而异,自行判断。)
      kubeadm config images list
    
      	k8s.gcr.io/kube-apiserver:v1.19.0
      	k8s.gcr.io/kube-controller-manager:v1.19.0
      	k8s.gcr.io/kube-scheduler:v1.19.0
      	k8s.gcr.io/kube-proxy:v1.19.0
      	k8s.gcr.io/pause:3.2
      	k8s.gcr.io/etcd:3.4.9-1
      	k8s.gcr.io/coredns:1.7.0
    
      # 下载对应版本镜像(这里的 makai554892700 可更改为自己的账号镜像,latest可改为对应版本,但是目前本人并未能获取到最新版本,请酌情处理,其中各版本请自行修改)
      docker pull makai554892700/kube-apiserver:latest
      docker pull makai554892700/kube-controller-manager:latest
      docker pull makai554892700/kube-scheduler:latest
      docker pull makai554892700/kube-proxy:latest
      docker pull makai554892700/etcd:latest
      docker pull makai554892700/coredns:latest
      docker pull makai554892700/pause:latest
      # 改名下载的镜像为线上的镜像(欺骗镜像下载器以曲线救国,其中各版本请自行修改)
      docker tag makai554892700/kube-apiserver:latest k8s.gcr.io/kube-apiserver:v1.19.0
      docker tag makai554892700/kube-controller-manager:latest k8s.gcr.io/kube-controller-manager:v1.19.0
      docker tag makai554892700/kube-scheduler:latest k8s.gcr.io/kube-scheduler:v1.19.0
      docker tag makai554892700/kube-proxy:latest k8s.gcr.io/kube-proxy:v1.19.0
      docker tag makai554892700/etcd:latest k8s.gcr.io/etcd:3.4.9-1
      docker tag makai554892700/coredns:latest k8s.gcr.io/coredns:1.7.0
      docker tag makai554892700/pause:latest k8s.gcr.io/pause:3.2
      ## 曲线救国--------------------end
    
  • 主节点运行
    # 在初始化的过程中可能会卡住(特别是公网,如果出现则修改/etc/kubernetes/manifests/etcd.yaml文件,未出现请无视下面一句 )
    vim /etc/kubernetes/manifests/etcd.yaml
    - --listen-client-urls=https://127.0.0.1:2379
    - --listen-peer-urls=https://127.0.0.1:2380
    # 初始化 kubeadm
    kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16
    # 例如( kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16 )
    # 如果有可用镜像可使用下面的命令处理,否则请无视
    # kubeadm init --kubernetes-version=<kubernetes_version> --image-repository registry.aliyuncs.com/google_containers --apiserver-advertise-address <host_ip> --pod-network-cidr=10.244.0.0/16
    # 根据提示创建kubectl
    rm -rf $HOME/.kube
    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown ( i d − u ) : (id -u): (idu):(id -g) $HOME/.kube/config
    # 获取token,复制token备用
    kubeadm token list
    # 若输出的token创建时间超过24小时可运行下面的命令重新创建,否则请无视
    kubeadm token create
    # 获取token sha256,复制备用
    openssl x509 -pubkey -in /etc/kubernetes/pki/ca.crt | openssl rsa -pubin -outform der 2>/dev/null | openssl dgst -sha256 -hex | sed ‘s/^.* //’
    # 安装网络插件 flannel 遇坑参考1
    # 遇坑 参考2
    wget https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
    kubectl apply -f kube-flannel.yml
    # 查看 flannel 是否正常运行
    kubectl get pod -n kube-system
    # 查看日志(根据实际情况修改 kube-flannel-ds-amd64-q8kvb )
    kubectl describe pod kube-flannel-ds-amd64-q8kvb -n kube-system
    # 如果安装未出现问题到此便结束了,如果flannel安装不成功继续曲线救国
    kubeadm reset
    kubeadm init --apiserver-advertise-address 0.0.0.0 --pod-network-cidr=10.244.0.0/16
    rm -rf $HOME/.kube
    mkdir -p $HOME/.kube
    sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    sudo chown ( i d − u ) : (id -u): (idu):(id -g) $HOME/.kube/config
    docker pull makai554892700/flannel:latest
    docker tag makai554892700/flannel:latest quay.io/coreos/flannel:v0.12.0-amd64
    kubectl apply -f kube-flannel.yml

  • 节点加入 官方文档

  • 子节点运行

      # 将主节点的 /run/systemd/resolve/resolv.conf 文件复制到子节点同目录 /run/systemd/resolve/resolv.conf
      # 加入主节点 例如 ( kubeadm join 192.168.169.128:6443 --token j0xuqn.u9fge2i8uo7dpxsj --discovery-token-ca-cert-hash sha256:93628f27ce0f5738fe1e1b63b1610c60d82a3d55669a025be841c94d547fdf85 )
      kubeadm join --token <token> <control-plane-host>:<control-plane-port> --discovery-token-ca-cert-hash sha256:<hash>
    
  • 主节点运行

      	# 查看节点
      	kubectl get nodes
    
  • 删除节点

    • 子节点运行

        # 重置 kubeadm 状态
        kubeadm reset
      
    • 主节点运行,例如( kubectl drain 192.168.169.134 --delete-local-data --force --ignore-daemonsets )

        kubectl delete pod kube-proxy-fbp57 -n kube-system
        kubectl drain <node name> --delete-local-data --force --ignore-daemonsets
      
  • k8s 安装ui界面 dashboard

      # 下载官方源
      wget  https://raw.githubusercontent.com/kubernetes/dashboard/v2.0.0-rc7/aio/deploy/recommended.yaml
      # 编辑文档
      vim recommended.yaml
      
      		kind: Service
      		apiVersion: v1
      		metadata:
      		  labels:
      		    k8s-app: kubernetes-dashboard
      		  name: kubernetes-dashboard
      		  namespace: kubernetes-dashboard
      		spec:
      		  type: NodePort
      		  ports:
      		    - port: 443
      		      targetPort: 8443
      		      nodePort: 30000
      		  selector:
      		    k8s-app: kubernetes-dashboard
      # 创建使用
      kubectl create -f recommended.yaml
      # 查看运行的服务
      kubectl get svc -n kubernetes-dashboard
      # 开启代理用于外界访问例
      kubectl proxy --address=0.0.0.0 --disable-filter=true
      # 查看权限问题 kubectl logs -f -n kubernetes-dashboard
      # 解决方法 kubectl create clusterrolebinding serviceaccount-cluster-admin --clusterrole=cluster-admin --group=system:serviceaccount
      # 访问 https://<host_ip>:30000 访问dashboard 例如(https://192.168.169.128:30000/)
      # 查看token
      kubectl -n kube-system describe $(kubectl -n kube-system get secret -n kube-system -o name | grep namespace) | grep token
    
Logo

K8S/Kubernetes社区为您提供最前沿的新闻资讯和知识内容

更多推荐