一、语音识别包

1、安装

        安装很简单，直接使用ubuntu命令即可，首先安装依赖库： 
$ sudo apt-get install gstreamer0.10-pocketsphinx 
$ sudo apt-get install ros-indigo-audio-common        //我安装的是indigo版本的 
$ sudo apt-get install libasound2  
$ sudo apt-get install gstreamer0.10-gconf

   然后来安装ROS包：

 

sudo apt-get install ros-indigo-pocketsphinx

2.       安装完成后我们就可以运行测试了。
        首先，插入你的麦克风设备，然后在系统设置里测试麦克风是否有语音输入。
        然后，运行包中的测试程序：      

 

 

$ roslaunch pocketsphinx robocup.launch

 我们也可以直接看ROS最后发布的结果消息：

$ rostopic echo /recognizer/output

 

 

二、语音库

1、查看语音库

        这个语音识别时一种离线识别的方法，将一些常用的词汇放到一个文件中，作为识别的文本库，然后分段识别语音信号，最后在库中搜索对应的文本信息。如果想看语音识别库中有哪些文本信息，可以通过下面的指令进行查询： 
$ roscd rbx1_speech/config  
$ more nav_commands.txt

 

 这就是需要添加的文本，我们也可以修改其中的某些文本，改成自己需要的。
        然后我们要把这个文件在线生成语音信息和库文件，这一步需要登陆网站http://www.speech.cs.cmu.edu/tools/lmtool-new.html，根据网站的提示上传文件，然后在线编译生成库文件。

 上传nav_commands.txt文件

把下载的文件都解压放在rbx1_speech包的config文件夹下。我们可以给这些文件改个名字：

rename -f 's/593/nav_commands/' *

 在rbx1_speech/launch文件夹下看看voice_nav_commands.launch这个文件：

<launch>

  <node name="recognizer" pkg="pocketsphinx" type="recognizer.py" output="screen">
    <param name="lm" value="$(find rbx1_speech)/config/nav_commands.lm"/>
    <param name="dict" value="$(find rbx1_speech)/config/nav_commands.dic"/>
  </node>
  
</launch>

 

可以看到，这个launch文件在运行recognizer.py节点的时候使用了我们生成的语音识别库和文件参数，这样就可以实用我们自己的语音库来进行语音识别了。
 通过之前的命令来测试一下效果如何吧：

    $ roslaunch rbx1_speech voice_nav_commands.launch  
    $ rostopic echo /recognizer/output

 

三、语音控制

        有了语音识别，我们就可以来做很多犀利的应用了，首先先来尝试一下用语音来控制机器人动作。

1、机器人控制节点

        前面说到的recognizer.py会将最后识别的文本信息通过消息发布，那么我们来编写一个机器人控制节点接收这个消息，进行相应的控制即可。
        在pocketsphinx包中本身有一个语音控制发布Twist消息的例程voice_cmd_vel.py，rbx1_speech包对其进行了一些简化修改，在nodes文件夹里可以查看voice_nav.py文件：

 

 

#!/usr/bin/env python

"""
  voice_nav.py - Version 1.1 2013-12-20
  
  Allows controlling a mobile base using simple speech commands.
  
  Based on the voice_cmd_vel.py script by Michael Ferguson in
  the pocketsphinx ROS package.
  
  See http://www.ros.org/wiki/pocketsphinx
"""

import rospy
from geometry_msgs.msg import Twist
from std_msgs.msg import String
from math import copysign

class VoiceNav:
    def __init__(self):
        rospy.init_node('voice_nav')
        
        rospy.on_shutdown(self.cleanup)
        
        # Set a number of parameters affecting the robot's speed
        self.max_speed = rospy.get_param("~max_speed", 0.4)
        self.max_angular_speed = rospy.get_param("~max_angular_speed", 1.5)
        self.speed = rospy.get_param("~start_speed", 0.1)
        self.angular_speed = rospy.get_param("~start_angular_speed", 0.5)
        self.linear_increment = rospy.get_param("~linear_increment", 0.05)
        self.angular_increment = rospy.get_param("~angular_increment", 0.4)
        
        # We don't have to run the script very fast
        self.rate = rospy.get_param("~rate", 5)
        r = rospy.Rate(self.rate)
        
        # A flag to determine whether or not voice control is paused
        self.paused = False
        
        # Initialize the Twist message we will publish.
        self.cmd_vel = Twist()

        # Publish the Twist message to the cmd_vel topic
        self.cmd_vel_pub = rospy.Publisher('cmd_vel', Twist, queue_size=5)
        
        # Subscribe to the /recognizer/output topic to receive voice commands.
        rospy.Subscriber('/recognizer/output', String, self.speech_callback)
        
        # A mapping from keywords or phrases to commands
        self.keywords_to_command = {'stop': ['stop', 'halt', 'abort', 'kill', 'panic', 'off', 'freeze', 'shut down', 'turn off', 'help', 'help me'],
                                    'slower': ['slow down', 'slower'],
                                    'faster': ['speed up', 'faster'],
                                    'forward': ['forward', 'ahead', 'straight'],
                                    'backward': ['back', 'backward', 'back up'],
                                    'rotate left': ['rotate left'],
                                    'rotate right': ['rotate right'],
                                    'turn left': ['turn left'],
                                    'turn right': ['turn right'],
                                    'quarter': ['quarter speed'],
                                    'half': ['half speed'],
                                    'full': ['full speed'],
                                    'pause': ['pause speech'],
                                    'continue': ['continue speech']}
        
        rospy.loginfo("Ready to receive voice commands")
        
        # We have to keep publishing the cmd_vel message if we want the robot to keep moving.
        while not rospy.is_shutdown():
            self.cmd_vel_pub.publish(self.cmd_vel)
            r.sleep()                       
            
    def get_command(self, data):
        # Attempt to match the recognized word or phrase to the 
        # keywords_to_command dictionary and return the appropriate
        # command
        for (command, keywords) in self.keywords_to_command.iteritems():
            for word in keywords:
                if data.find(word) > -1:
                    return command
        
    def speech_callback(self, msg):
        # Get the motion command from the recognized phrase
        command = self.get_command(msg.data)
        
        # Log the command to the screen
        rospy.loginfo("Command: " + str(command))
        
        # If the user has asked to pause/continue voice control,
        # set the flag accordingly 
        if command == 'pause':
            self.paused = True
        elif command == 'continue':
            self.paused = False
        
        # If voice control is paused, simply return without
        # performing any action
        if self.paused:
            return       
        
        # The list of if-then statements should be fairly
        # self-explanatory
        if command == 'forward':    
            self.cmd_vel.linear.x = self.speed
            self.cmd_vel.angular.z = 0
            
        elif command == 'rotate left':
            self.cmd_vel.linear.x = 0
            self.cmd_vel.angular.z = self.angular_speed
                
        elif command == 'rotate right':  
            self.cmd_vel.linear.x = 0      
            self.cmd_vel.angular.z = -self.angular_speed
            
        elif command == 'turn left':
            if self.cmd_vel.linear.x != 0:
                self.cmd_vel.angular.z += self.angular_increment
            else:        
                self.cmd_vel.angular.z = self.angular_speed
                
        elif command == 'turn right':    
            if self.cmd_vel.linear.x != 0:
                self.cmd_vel.angular.z -= self.angular_increment
            else:        
                self.cmd_vel.angular.z = -self.angular_speed
                
        elif command == 'backward':
            self.cmd_vel.linear.x = -self.speed
            self.cmd_vel.angular.z = 0
            
        elif command == 'stop': 
            # Stop the robot!  Publish a Twist message consisting of all zeros.         
            self.cmd_vel = Twist()
        
        elif command == 'faster':
            self.speed += self.linear_increment
            self.angular_speed += self.angular_increment
            if self.cmd_vel.linear.x != 0:
                self.cmd_vel.linear.x += copysign(self.linear_increment, self.cmd_vel.linear.x)
            if self.cmd_vel.angular.z != 0:
                self.cmd_vel.angular.z += copysign(self.angular_increment, self.cmd_vel.angular.z)
            
        elif command == 'slower':
            self.speed -= self.linear_increment
            self.angular_speed -= self.angular_increment
            if self.cmd_vel.linear.x != 0:
                self.cmd_vel.linear.x -= copysign(self.linear_increment, self.cmd_vel.linear.x)
            if self.cmd_vel.angular.z != 0:
                self.cmd_vel.angular.z -= copysign(self.angular_increment, self.cmd_vel.angular.z)
                
        elif command in ['quarter', 'half', 'full']:
            if command == 'quarter':
                self.speed = copysign(self.max_speed / 4, self.speed)
        
            elif command == 'half':
                self.speed = copysign(self.max_speed / 2, self.speed)
            
            elif command == 'full':
                self.speed = copysign(self.max_speed, self.speed)
            
            if self.cmd_vel.linear.x != 0:
                self.cmd_vel.linear.x = copysign(self.speed, self.cmd_vel.linear.x)

            if self.cmd_vel.angular.z != 0:
                self.cmd_vel.angular.z = copysign(self.angular_speed, self.cmd_vel.angular.z)
                
        else:
            return

        self.cmd_vel.linear.x = min(self.max_speed, max(-self.max_speed, self.cmd_vel.linear.x))
        self.cmd_vel.angular.z = min(self.max_angular_speed, max(-self.max_angular_speed, self.cmd_vel.angular.z))

    def cleanup(self):
        # When shutting down be sure to stop the robot!
        twist = Twist()
        self.cmd_vel_pub.publish(twist)
        rospy.sleep(1)

if __name__=="__main__":
    try:
        VoiceNav()
        rospy.spin()
    except rospy.ROSInterruptException:
        rospy.loginfo("Voice navigation terminated.")

 

        可以看到，代码中定义了接收到各种命令时的控制策略。

2、仿真测试

        和前面一样，我们在rviz中进行仿真测试。
        首先是运行一个机器人模型：

 

$ roslaunch rbx1_bringup fake_turtlebot.launch

 

         然后打开rviz：

$ rosrun rviz rviz -d `rospack find rbx1_nav`/sim.rviz

    最后就是机器人的控制节点了：

$ roslaunch rbx1_speech voice_nav_commands.launch         再打开语音识别的节点：
$ roslaunch rbx1_speech turtlebot_voice_nav.launch        最后就是机器人的控制节点了：

    OK，打开上面这一堆的节点之后，就可以开始了。可以使用的命令如下：


 

可能是英语太差吧，很难识别；

 

 

四、播放语音

        现在机器人已经可以按照我们说的话行动了，要是机器人可以和我们对话就更好了。ROS中已经集成了这样的包，下面就来尝试一下。
        运行下面的命令： 
    $ rosrun sound_play soundplay_node.py  
    $ rosrun sound_play say.py "Greetings Humans. Take me to your leader."

         有没有听见声音！ROS通过识别我们输入的文本，让机器人读了出来。发出这个声音的人叫做kal_diphone，如果不喜欢，我们也可以换一个人来读：

    $ sudo apt-get install festvox-don  
    $ rosrun sound_play say.py "Welcome to the future" voice_don_diphone

  哈哈，这回换了一个人吧，好吧，这不也是我们的重点。
       在rbx1_speech/nodes文件夹中有一个让机器人说话的节点talkback.py:

#!/usr/bin/env python

"""
    talkback.py - Version 1.1 2013-12-20
    
    Use the sound_play client to say back what is heard by the pocketsphinx recognizer.
    
    Created for the Pi Robot Project: http://www.pirobot.org
    Copyright (c) 2012 Patrick Goebel.  All rights reserved.

    This program is free software; you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
    the Free Software Foundation; either version 2 of the License, or
    (at your option) any later version.5
    
    This program is distributed in the hope that it will be useful,
    but WITHOUT ANY WARRANTY; without even the implied warranty of
    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
    GNU General Public License for more details at:
    
    http://www.gnu.org/licenses/gpl.htmlPoint
"""

import rospy
from std_msgs.msg import String
from sound_play.libsoundplay import SoundClient
import sys

class TalkBack:
    def __init__(self, script_path):
        rospy.init_node('talkback')

        rospy.on_shutdown(self.cleanup)
        
        # Set the default TTS voice to use
        self.voice = rospy.get_param("~voice", "voice_don_diphone")
        
        # Set the wave file path if used
        self.wavepath = rospy.get_param("~wavepath", script_path + "/../sounds")
        
        # Create the sound client object
        self.soundhandle = SoundClient()
        
        # Wait a moment to let the client connect to the
        # sound_play server
        rospy.sleep(1)
        
        # Make sure any lingering sound_play processes are stopped.
        self.soundhandle.stopAll()
        
        # Announce that we are ready for input
        self.soundhandle.playWave(self.wavepath + "/R2D2a.wav")
        rospy.sleep(1)
        self.soundhandle.say("Ready", self.voice)
        
        rospy.loginfo("Say one of the navigation commands...")

        # Subscribe to the recognizer output and set the callback function
        rospy.Subscriber('/recognizer/output', String, self.talkback)
        
    def talkback(self, msg):
        # Print the recognized words on the screen
        rospy.loginfo(msg.data)
        
        # Speak the recognized words in the selected voice
        self.soundhandle.say(msg.data, self.voice)
        
        # Uncomment to play one of the built-in sounds
        #rospy.sleep(2)
        #self.soundhandle.play(5)
        
        # Uncomment to play a wave file
        #rospy.sleep(2)
        #self.soundhandle.playWave(self.wavepath + "/R2D2a.wav")

    def cleanup(self):
        self.soundhandle.stopAll()
        rospy.loginfo("Shutting down talkback node...")

if __name__=="__main__":
    try:
        TalkBack(sys.path[0])
        rospy.spin()
    except rospy.ROSInterruptException:
        rospy.loginfo("Talkback node terminated.")

 

   我们来运行看一下效果：

$ roslaunch rbx1_speech talkback.launch

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 



 

 

转载于:https://www.cnblogs.com/CZM-/p/5932014.html

# 运维 # 人工智能 # python
Logo
CSDN学习社区

CSDN联合极客时间，共同打造面向开发者的精品内容学习社区，助力成长！

更多推荐

cover

用 OpenAI Assistants 做大模型应用开发

avatar CSDN学习社区
cover

1 小时解读鸿蒙 10 大热点问题

avatar CSDN学习社区
cover

1 小时解读鸿蒙 10 大热点问题

avatar CSDN学习社区