配置环境

本次配置共准备master、node1、node2三台服务器，环境配置三台机器保持同步

1.安装docker

参考文章centos安装docker

2.关闭防火墙

关闭防火墙并禁用开机启动

systemctl stop firewalld & systemctl disable firewalld

3.关闭Swap

目的在于防止内存交换影响性能以及稳定性

• swapoff -a可临时关闭，系统重启后恢复
• 编辑/etc/fstab注释包含swap一行重启之后可永久关闭
  快速命令：

swapoff -a
sed -i '/swap/s/^/#/' /etc/fstab

4.关闭SeLinux

目的在于允许容器访问宿主机的文件系统

setenforce 0
sed -i "s/SELINUX=enforcing/SELINUX=disabled/g" /etc/selinux/config

5.配置k8s国内yum源

由于墙的存在，需要配置国内的下载源，使用如下命令添加

cat <<EOF > /etc/yum.repos.d/kubernetes.repo

[kubernetes]

name=Kubernetes

baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64

enabled=1

gpgcheck=0

repo_gpgcheck=0

gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg

        http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg

EOF

6.修改docker引擎

修改docker cgroup驱动，与k8s一致，防止因为引擎不一致而导致的启动错误

vi /etc/docker/daemon.json

{
  "exec-opts": ["native.cgroupdriver=systemd"],
  "log-driver": "json-file",
  "log-opts": {
    "max-size": "100m"
  },
  "storage-driver": "overlay2",
  "storage-opts": [
    "overlay2.override_kernel_check=true"
  ],
  "registry-mirrors": ["https://registry.docker-cn.com","http://hub-mirror.c.163.com"]
}

执行如下命令重启docker

systemctl daemon-reload
systemctl restart docker

7.安装k8s组件

执行命令(所有节点机都需要安装)

# 下载相关组件
yum install -y kubelet-1.15.1 kubeadm-1.15.1 kubectl-1.15.1
# 设置开机启动 kubelet
systemctl enable --now kubelet

8.设置路由

centos7需要设置路由

yum install -y bridge-utils.x86_64

# 加载br_netfilter模块，使用lsmod查看开启的模块
modprobe  br_netfilter

# 修改配置文件
cat <<EOF >  /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
EOF

# 重新加载配置文件
sysctl --system

创建集群

集群创建master机器与node机器有所区别，文中会做出区分

1.拉取集群所需镜像

把所需的镜像下载好，init的时候就不会再拉镜像，由于无法连接google镜像库导致出错

首先拉取国内对应镜像资源

• master服务器：

docker pull mirrorgooglecontainers/kube-apiserver:v1.15.1
docker pull mirrorgooglecontainers/kube-controller-manager:v1.15.1
docker pull mirrorgooglecontainers/kube-scheduler:v1.15.1
docker pull mirrorgooglecontainers/kube-proxy:v1.15.1
docker pull mirrorgooglecontainers/pause:3.1
docker pull mirrorgooglecontainers/etcd:3.3.10
docker pull coredns/coredns:1.3.1

• node服务器：

docker pull mirrorgooglecontainers/kube-proxy:v1.15.1
docker pull mirrorgooglecontainers/pause:3.1

将镜像tag名称修改为k8s官方一致

• master服务器：

docker tag mirrorgooglecontainers/kube-apiserver:v1.15.1 k8s.gcr.io/kube-apiserver:v1.15.1
docker tag mirrorgooglecontainers/kube-controller-manager:v1.15.1 k8s.gcr.io/kube-controller-manager:v1.15.1
docker tag mirrorgooglecontainers/kube-scheduler:v1.15.1 k8s.gcr.io/kube-scheduler:v1.15.1
docker tag mirrorgooglecontainers/kube-proxy:v1.15.1 k8s.gcr.io/kube-proxy:v1.15.1
docker tag mirrorgooglecontainers/pause:3.1 k8s.gcr.io/pause:3.1
docker tag mirrorgooglecontainers/etcd:3.3.10 k8s.gcr.io/etcd:3.3.10
docker tag coredns/coredns:1.3.1 k8s.gcr.io/coredns:1.3.1

• node服务器：

docker tag mirrorgooglecontainers/kube-proxy:v1.15.1 k8s.gcr.io/kube-proxy:v1.15.1
docker tag mirrorgooglecontainers/pause:3.1 k8s.gcr.io/pause:3.1

删除原来的镜像

• master服务器：

docker rmi mirrorgooglecontainers/kube-apiserver:v1.15.1
docker rmi mirrorgooglecontainers/kube-controller-manager:v1.15.1
docker rmi mirrorgooglecontainers/kube-scheduler:v1.15.1
docker rmi mirrorgooglecontainers/kube-proxy:v1.15.1
docker rmi mirrorgooglecontainers/pause:3.1
docker rmi mirrorgooglecontainers/etcd:3.3.10
docker rmi coredns/coredns:1.3.1

• node服务器：

docker rmi mirrorgooglecontainers/kube-proxy:v1.15.1
docker rmi mirrorgooglecontainers/pause:3.1

2.master机器创建集群

修改master机器hostname为master

hostnamectl set-hostname master

创建集群

# --apiserver-advertise-address 本机ip
# --kubernetes-version 指定镜像版本
# --service-cidr 服务使用IP地址的替代范围
# --pod-network-cidr 指定Pod网络的IP地址范围。如果设置，控制平面将自动为每个节点分配CIDR
kubeadm init --apiserver-advertise-address 192.168.0.108 --kubernetes-version 1.15.1 --service-cidr 10.1.0.0/16 --pod-network-cidr 10.244.0.0/16

看到显示下列信息代表集群启动成功

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.0.108:6443 --token y9e8yj.a2olglq2lurpmow7 \
    --discovery-token-ca-cert-hash sha256:43e3035c08345a303afd696ed8a87d3b8a2ebd2c875d2fb30d2eeea47594447c 

上述信息表示我们可以通过运行此行命令将node服务器加入集群，需要记录以免遗忘

kubeadm join 192.168.0.108:6443 --token y9e8yj.a2olglq2lurpmow7 \
    --discovery-token-ca-cert-hash sha256:43e3035c08345a303afd696ed8a87d3b8a2ebd2c875d2fb30d2eeea47594447c 

根据kubeadm信息提示设置普通用户权限

.kube/config文件可以放在任意安装有kubectl的机器上，通过该文件可以使用kubectl远程控制集群

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config

应用flannel网络

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/a70459be0084506e4ec919aa1c114638878db11b/Documentation/kube-flannel.yml

若报错The connection to the server raw.githubusercontent.com was refused - did you specify the right host or port?则是网络导致的，改用手动添加解决

kubectl apply -f - <<EOF
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
rules:
  - apiGroups:
      - ""
    resources:
      - pods
    verbs:
      - get
  - apiGroups:
      - ""
    resources:
      - nodes
    verbs:
      - list
      - watch
  - apiGroups:
      - ""
    resources:
      - nodes/status
    verbs:
      - patch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1beta1
metadata:
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-system
---
apiVersion: v1
kind: ServiceAccount
metadata:
  name: flannel
  namespace: kube-system
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-system
  labels:
    tier: node
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-amd64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      hostNetwork: true
      nodeSelector:
        beta.kubernetes.io/arch: amd64
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-amd64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: true
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm64
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      hostNetwork: true
      nodeSelector:
        beta.kubernetes.io/arch: arm64
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm64
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: true
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-arm
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      hostNetwork: true
      nodeSelector:
        beta.kubernetes.io/arch: arm
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-arm
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: true
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-ppc64le
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      hostNetwork: true
      nodeSelector:
        beta.kubernetes.io/arch: ppc64le
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-ppc64le
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: true
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
---
apiVersion: extensions/v1beta1
kind: DaemonSet
metadata:
  name: kube-flannel-ds-s390x
  namespace: kube-system
  labels:
    tier: node
    app: flannel
spec:
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      hostNetwork: true
      nodeSelector:
        beta.kubernetes.io/arch: s390x
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: quay.io/coreos/flannel:v0.11.0-s390x
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
          limits:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: true
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        volumeMounts:
        - name: run
          mountPath: /run
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      volumes:
        - name: run
          hostPath:
            path: /run
        - name: cni
          hostPath:
            path: /etc/cni/net.d
        - name: flannel-cfg
          configMap:
            name: kube-flannel-cfg
EOF

查看节点信息

kubectl get nodes

出现如下信息

NAME     STATUS     ROLES    AGE   VERSION
master   Ready      master   35ms   v1.15.1

若出现节点依旧是NotReady则参阅文章:工作节点NotReady处理

node节点加入集群

node服务器分别更改名称为node1、node2

# node1服务器
hostnamectl set-hostname node1

# node2服务器
hostnamectl set-hostname node2

运行kubeadm join命令加入集群

# node1服务器
kubeadm join 192.168.0.108:6443 --token y9e8yj.a2olglq2lurpmow7 \
    --discovery-token-ca-cert-hash sha256:43e3035c08345a303afd696ed8a87d3b8a2ebd2c875d2fb30d2eeea47594447c

# node2服务器
kubeadm join 192.168.0.108:6443 --token y9e8yj.a2olglq2lurpmow7 \
    --discovery-token-ca-cert-hash sha256:43e3035c08345a303afd696ed8a87d3b8a2ebd2c875d2fb30d2eeea47594447c 

若出现如下报错

error execution phase preflight: unable to fetch the kubeadm-config ConfigMap: failed to get config map: Unauthorized

说明距离master生成的join命令已经超过24小时，token已经过期需要重新生成。

运行以下命令生成新的token

kubeadm token create

将生成的token值替换join命令中的token值再次运行join命令

然后回到master服务器，查看节点信息

kubectl get nodes

出现如下信息

NAME     STATUS     ROLES    AGE   VERSION
master   Ready      master   5m    v1.15.1
node1    Ready      <none>   42ms  v1.15.1
node2    Ready      <none>   22ms  v1.15.1

至此，k8s部署完毕

附加

由于构建集群的服务器时间可能存在一些误差，在一些验证token的服务里可能会出现因误差所导致的异常，建议构建集群的同时将集群内部所有服务器的时间同步。

服务器时间同步可以查看另一篇文章《centos服务器同步时间》

若需要针对gpu节点机进行配置，参考文章docker19.03以上版本k8s配置GPU支持