完整部署一套k8s-v.1.28.0版本的集群

2.1、所有节点修改防火墙,本次是实验环境，图省事选择关闭防火墙，如果是生产，除非做了公网和内网隔离，还是别关闭吧，做好相关接口开发就行。3.3、配置 systemd cgroup 驱动在 /etc/containerd/config.toml 中设置。如果遇到的情况是命令卡住不动，大概率是token过期了，回到master节点，执行。创建新的token，替换后重新执行就行现在可以看到mast

old_GGB

2502人浏览 · 2024-03-27 11:08:55

old_GGB · 2024-03-27 11:08:55 发布

如何完整部署一套k8s-v.1.28.0版本的集群？

一、系统情况

虚拟机版本：esxi 6.7

系统版本：centos7.9_2009_x86

配置：4核8G（官网最低要求2核2G）

192.168.0.137 master节点

192.168.0.139 node2节点

192.168.0.138 node1节点（节点扩容练习）

二、环境配置

2.1、所有节点修改防火墙,本次是实验环境，图省事选择关闭防火墙，如果是生产，除非做了公网和内网隔离，还是别关闭吧，做好相关接口开发就行。

systemctl stop firewalld  #停止防火墙
systemctl disable firewalld #设置开机不启动

2.2、所有节点禁用selinux

#修改/etc/selinux/config文件中的SELINUX=permissive
vi /etc/selinux/config
或
# 将 SELinux 设置为 permissive 模式（相当于将其禁用）
sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing$/SELINUX=permissive/' /etc/selinux/config

2.3、所有节点关闭swap分区

#永久禁用swap,删除或注释掉/etc/fstab里的swap设备的挂载命令即可
nano /etc/fstab
#/dev/mapper/centos-swap swap                    swap    defaults        0 0

2.4、修改时区时间

ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
date

2.5、所有节点配置hosts

192.168.0.137   master
192.168.0.139   node2
192.168.0.138   node1

2.6、开启bridge-nf-call-iptalbes

cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
overlay
br_netfilter
EOF

sudo modprobe overlay
sudo modprobe br_netfilter

# 设置所需的 sysctl 参数，参数在重新启动后保持不变
cat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-iptables  = 1
net.bridge.bridge-nf-call-ip6tables = 1
net.ipv4.ip_forward                 = 1
EOF

# 应用 sysctl 参数而不重新启动
sudo sysctl --system

通过运行以下指令确认 `br_netfilter` 和 `overlay` 模块被加载：

lsmod | grep br_netfilter
lsmod | grep overlay

通过运行以下指令确认 net.bridge.bridge-nf-call-iptables、net.bridge.bridge-nf-call-ip6tables 和 net.ipv4.ip_forward 系统变量在你的 sysctl 配置中被设置为 1：

sysctl net.bridge.bridge-nf-call-iptables net.bridge.bridge-nf-call-ip6tables net.ipv4.ip_forward

三、所有节点安装containerd

3.1、安装containerd

yum install -y yum-utils
yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo
yum -y install containerd.io

3.2、生成config.toml配置

containerd config default > /etc/containerd/config.toml

3.3、配置 systemd cgroup 驱动在 /etc/containerd/config.toml 中设置

sed -i 's/SystemdCgroup = false/SystemdCgroup = true/g' /etc/containerd/config.toml

[plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc]
  ...
  [plugins."io.containerd.grpc.v1.cri".containerd.runtimes.runc.options]
    SystemdCgroup = true

将sandbox_image下载地址改为阿里云地址

[plugins."io.containerd.grpc.v1.cri"]
    ...
    sandbox_image = "registry.aliyuncs.com/google_containers/pause:3.9"

3.4、启动containerd 并设置开机自启动

systemctl restart containerd && systemctl enable containerd

四、k8s配置阿里云yum源

cat <<EOF > /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name = Kubernetes
baseurl = https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
enabled = 1
gpgcheck = 0
repo_gpgcheck = 0
gpgkey = https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
EOF

五、yum安装kubeadm、kubelet、kubectl

5.2、安装kubeadm、kubelet、kubectl

这些说明适用于 Kubernetes 1.28，阿里的yum源，kubelet版本只更新到1.28.0版本，所以下面命令需要加上版本号

yum install -y kubelet-1.28.0 kubeadm-1.28.0 kubectl-1.28.0 --disableexcludes=kubernetes
systemctl enable kubelet

六、初始化master节点

kubeadm init \
--apiserver-advertise-address=192.168.0.137 \
--image-repository registry.aliyuncs.com/google_containers \
--kubernetes-version v1.28.0 \
--service-cidr=10.96.0.0/12 \
--pod-network-cidr=10.244.0.0/16

得到以下内容,表示安装成功

Your Kubernetes control-plane has initialized successfully!

To start using your cluster, you need to run the following as a regular user:

  mkdir -p $HOME/.kube
  sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
  sudo chown $(id -u):$(id -g) $HOME/.kube/config

Alternatively, if you are the root user, you can run:

  export KUBECONFIG=/etc/kubernetes/admin.conf

You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
  https://kubernetes.io/docs/concepts/cluster-administration/addons/

Then you can join any number of worker nodes by running the following on each as root:

kubeadm join 192.168.0.137:6443 --token 2piab7.b39dqm9kpadxynkm \
        --discovery-token-ca-cert-hash sha256:c0bc36fedc05d4613ad03c1d6b8639dedb3fd3136d6a6be400e179410e0a0bff

然后按照上面提示，一步步执行命令

mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
export KUBECONFIG=/etc/kubernetes/admin.conf

现在可以看到master节点了

kubectl get node

七、子节点加入master节点

kubeadm join 192.168.0.137:6443 --token 2piab7.b39dqm9kpadxynkm \
        --discovery-token-ca-cert-hash sha256:c0bc36fedc05d4613ad03c1d6b8639dedb3fd3136d6a6be400e179410e0a0bff

如果遇到的情况是命令卡住不动，大概率是token过期了，回到master节点，执行

kubeadm token create

创建新的token，替换后重新执行就行现在可以看到master节点和子节点了

kubectl get node

八、部署CNI网络插件

8.1、下载cni插件

wget https://github.com/containernetworking/plugins/releases/download/v1.3.0/cni-plugins-linux-amd64-v1.3.0.tgz
mkdir -pv /opt/cni/bin
tar zxvf cni-plugins-linux-amd64-v1.3.0.tgz -C /opt/cni/bin/

8.2、master安装flannel

kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

# 有些网络限制可能不能获取得到这个配置
---
kind: Namespace
apiVersion: v1
metadata:
  name: kube-flannel
  labels:
    k8s-app: flannel
    pod-security.kubernetes.io/enforce: privileged
---
kind: ClusterRole
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: flannel
  name: flannel
rules:
- apiGroups:
  - ""
  resources:
  - pods
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes/status
  verbs:
  - patch
- apiGroups:
  - networking.k8s.io
  resources:
  - clustercidrs
  verbs:
  - list
  - watch
---
kind: ClusterRoleBinding
apiVersion: rbac.authorization.k8s.io/v1
metadata:
  labels:
    k8s-app: flannel
  name: flannel
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: flannel
subjects:
- kind: ServiceAccount
  name: flannel
  namespace: kube-flannel
---
apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    k8s-app: flannel
  name: flannel
  namespace: kube-flannel
---
kind: ConfigMap
apiVersion: v1
metadata:
  name: kube-flannel-cfg
  namespace: kube-flannel
  labels:
    tier: node
    k8s-app: flannel
    app: flannel
data:
  cni-conf.json: |
    {
      "name": "cbr0",
      "cniVersion": "0.3.1",
      "plugins": [
        {
          "type": "flannel",
          "delegate": {
            "hairpinMode": true,
            "isDefaultGateway": true
          }
        },
        {
          "type": "portmap",
          "capabilities": {
            "portMappings": true
          }
        }
      ]
    }
  net-conf.json: |
    {
      "Network": "10.244.0.0/16",
      "Backend": {
        "Type": "vxlan"
      }
    }
---
apiVersion: apps/v1
kind: DaemonSet
metadata:
  name: kube-flannel-ds
  namespace: kube-flannel
  labels:
    tier: node
    app: flannel
    k8s-app: flannel
spec:
  selector:
    matchLabels:
      app: flannel
  template:
    metadata:
      labels:
        tier: node
        app: flannel
    spec:
      affinity:
        nodeAffinity:
          requiredDuringSchedulingIgnoredDuringExecution:
            nodeSelectorTerms:
            - matchExpressions:
              - key: kubernetes.io/os
                operator: In
                values:
                - linux
      hostNetwork: true
      priorityClassName: system-node-critical
      tolerations:
      - operator: Exists
        effect: NoSchedule
      serviceAccountName: flannel
      initContainers:
      - name: install-cni-plugin
        image: docker.io/flannel/flannel-cni-plugin:v1.2.0
        command:
        - cp
        args:
        - -f
        - /flannel
        - /opt/cni/bin/flannel
        volumeMounts:
        - name: cni-plugin
          mountPath: /opt/cni/bin
      - name: install-cni
        image: docker.io/flannel/flannel:v0.24.0
        command:
        - cp
        args:
        - -f
        - /etc/kube-flannel/cni-conf.json
        - /etc/cni/net.d/10-flannel.conflist
        volumeMounts:
        - name: cni
          mountPath: /etc/cni/net.d
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
      containers:
      - name: kube-flannel
        image: docker.io/flannel/flannel:v0.24.0
        command:
        - /opt/bin/flanneld
        args:
        - --ip-masq
        - --kube-subnet-mgr
        resources:
          requests:
            cpu: "100m"
            memory: "50Mi"
        securityContext:
          privileged: false
          capabilities:
            add: ["NET_ADMIN", "NET_RAW"]
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: EVENT_QUEUE_DEPTH
          value: "5000"
        volumeMounts:
        - name: run
          mountPath: /run/flannel
        - name: flannel-cfg
          mountPath: /etc/kube-flannel/
        - name: xtables-lock
          mountPath: /run/xtables.lock
      volumes:
      - name: run
        hostPath:
          path: /run/flannel
      - name: cni-plugin
        hostPath:
          path: /opt/cni/bin
      - name: cni
        hostPath:
          path: /etc/cni/net.d
      - name: flannel-cfg
        configMap:
          name: kube-flannel-cfg
      - name: xtables-lock
        hostPath:
          path: /run/xtables.lock
          type: FileOrCreate

8.3、查看节点

kubectl get node
[root@master containerd]# kubectl get node
NAME      STATUS   ROLES           AGE    VERSION
master    Ready    control-plane   115m   v1.28.0
worker2   Ready    <none>          112m   v1.28.0

都已经成为ready了，在master服务器执行

查看所有pods状态

kubectl get pods -A
[root@master containerd]# kubectl get pods -A
NAMESPACE      NAME                                READY   STATUS    RESTARTS   AGE
kube-flannel   kube-flannel-ds-knclw               1/1     Running   0          99m
kube-flannel   kube-flannel-ds-psnhd               1/1     Running   0          99m
kube-system    coredns-66f779496c-65t9r            1/1     Running   0          116m
kube-system    coredns-66f779496c-sfzz6            1/1     Running   0          116m
kube-system    etcd-master                         1/1     Running   1          116m
kube-system    kube-apiserver-master               1/1     Running   1          117m
kube-system    kube-controller-manager-master      1/1     Running   1          117m
kube-system    kube-proxy-sfrr8                    1/1     Running   0          113m
kube-system    kube-proxy-vwn6z                    1/1     Running   0          116m
kube-system    kube-scheduler-master               1/1     Running   1          116m
testing-sc     server-dashboard-7cfc5c6cb6-jrs9d   1/1     Running   0          25m
[root@master containerd]#

九、dashboard

个人还是推荐kuboard(https://kuboard.cn/)

十、部署过程异常处理

crictl ps

报错

[root@worker2 containerd]# crictl ps
WARN[0000] runtime connect using default endpoints: [unix:///var/run/dockershim.sock unix:///run/containerd/containerd.sock unix:///run/crio/crio.sock unix:///var/run/cri-dockerd.sock]. As the default settings are now deprecated, you should set the endpoint instead. 
WARN[0000] image connect using default endpoints: [unix:///var/run/dockershim.sock unix:///run/containerd/containerd.sock unix:///run/crio/crio.sock unix:///var/run/cri-dockerd.sock]. As the default settings are now deprecated, you should set the endpoint instead. 
E0105 11:02:34.298539   32345 remote_runtime.go:390] "ListContainers with filter from runtime service failed" err="rpc error: code = Unavailable desc = connection error: desc = \"transport: Error while dialing dial unix /var/run/dockershim.sock: connect: no such file or directory\"" filter="&ContainerFilter{Id:,State:&ContainerStateValue{State:CONTAINER_RUNNING,},PodSandboxId:,LabelSelector:map[string]string{},}"
FATA[0000] listing containers: rpc error: code = Unavailable desc = connection error: desc = "transport: Error while dialing dial unix /var/run/dockershim.sock: connect: no such file or directory"

原因

crictl依次查找容器运行时，当查找第一个 unix:///var/run/dockershim.sock 没有找到，所以报错了，需要你手动指定当前kubernetes的容器运行时，使用什么，例如：

kubernetes 1.24+ 之后，dockershim已经变成了cri-docker，所以你需要执行：

crictl config runtime-endpoint unix:///var/run/cri-dockerd.sock
如果你的容器运行时，已经换成了containerd，则换成containerd的，如：

crictl config runtime-endpoint unix:///var/run/containerd/containerd.sock
之后，你在执行就好了。

另外：生成的配置在cat /etc/crictl.yaml，可以随时修改。

配置私有镜像仓库

/etc/containerd/config.toml文件中找到 [plugins."io.containerd.grpc.v1.cri".registry]这行配置

[plugins."io.containerd.grpc.v1.cri".registry]
  [plugins."io.containerd.grpc.v1.cri".registry.mirrors]
    [plugins."io.containerd.grpc.v1.cri".registry.mirrors."your.harbor.registry"]
      endpoint = ["https://your.harbor.registry"] //此处是https就用https，是http就用http，不知道是否还需要关闭https安全认证

十一、containerd和docker操作差异

操作	Docker	Containerd (ctr)	Crictl (K8s)
查看运行的容器	docker ps	ctr task ls	crictl ps
查看镜像	docker images	ctr image ls	crictl images
查看容器日志	docker logs	无	crictl logs
查看容器数据信息	docker inspect	ctr container info	crictl inspect
查看容器资源	docker stats	无	crictl stats
启动/关闭已有的容器	docker start/stop	ctr task start/kill	crictl start/stop
运行一个新的容器	docker run	ctr run	无
修改镜像标签	docker tag	ctr image tag	无
创建一个新的容器	docker create	ctr container create	crictl create
导入镜像	docker load	ctr image import	无
导出镜像	docker save	ctr image export	无
删除容器	docker rm	ctr container rm	crictl rm
删除镜像	docker rmi	ctr image rm	crictl rmi
拉取镜像	docker pull	ctr image pull	crictl pull
推送镜像	docker push	ctr image push	无
在容器内部执行命令	docker exec	无	crictl exec

十二、部署ingress-nginx-controller

apiVersion: v1
kind: Namespace
metadata:
  labels:
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
  name: ingress-nginx
---
apiVersion: v1
automountServiceAccountToken: true
kind: ServiceAccount
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx
  namespace: ingress-nginx
---
apiVersion: v1
kind: ServiceAccount
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
  namespace: ingress-nginx
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx
  namespace: ingress-nginx
rules:
- apiGroups:
  - ""
  resources:
  - namespaces
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - configmaps
  - pods
  - secrets
  - endpoints
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - services
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - networking.k8s.io
  resources:
  - ingresses
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - networking.k8s.io
  resources:
  - ingresses/status
  verbs:
  - update
- apiGroups:
  - networking.k8s.io
  resources:
  - ingressclasses
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - coordination.k8s.io
  resourceNames:
  - ingress-nginx-leader
  resources:
  - leases
  verbs:
  - get
  - update
- apiGroups:
  - coordination.k8s.io
  resources:
  - leases
  verbs:
  - create
- apiGroups:
  - ""
  resources:
  - events
  verbs:
  - create
  - patch
- apiGroups:
  - discovery.k8s.io
  resources:
  - endpointslices
  verbs:
  - list
  - watch
  - get
---
apiVersion: rbac.authorization.k8s.io/v1
kind: Role
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
  namespace: ingress-nginx
rules:
- apiGroups:
  - ""
  resources:
  - secrets
  verbs:
  - get
  - create
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx
rules:
- apiGroups:
  - ""
  resources:
  - configmaps
  - endpoints
  - nodes
  - pods
  - secrets
  - namespaces
  verbs:
  - list
  - watch
- apiGroups:
  - coordination.k8s.io
  resources:
  - leases
  verbs:
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - nodes
  verbs:
  - get
- apiGroups:
  - ""
  resources:
  - services
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - networking.k8s.io
  resources:
  - ingresses
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - ""
  resources:
  - events
  verbs:
  - create
  - patch
- apiGroups:
  - networking.k8s.io
  resources:
  - ingresses/status
  verbs:
  - update
- apiGroups:
  - networking.k8s.io
  resources:
  - ingressclasses
  verbs:
  - get
  - list
  - watch
- apiGroups:
  - discovery.k8s.io
  resources:
  - endpointslices
  verbs:
  - list
  - watch
  - get
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRole
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
rules:
- apiGroups:
  - admissionregistration.k8s.io
  resources:
  - validatingwebhookconfigurations
  verbs:
  - get
  - update
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx
  namespace: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: ingress-nginx
subjects:
- kind: ServiceAccount
  name: ingress-nginx
  namespace: ingress-nginx
---
apiVersion: rbac.authorization.k8s.io/v1
kind: RoleBinding
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
  namespace: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: Role
  name: ingress-nginx-admission
subjects:
- kind: ServiceAccount
  name: ingress-nginx-admission
  namespace: ingress-nginx
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  labels:
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: ingress-nginx
subjects:
- kind: ServiceAccount
  name: ingress-nginx
  namespace: ingress-nginx
---
apiVersion: rbac.authorization.k8s.io/v1
kind: ClusterRoleBinding
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
roleRef:
  apiGroup: rbac.authorization.k8s.io
  kind: ClusterRole
  name: ingress-nginx-admission
subjects:
- kind: ServiceAccount
  name: ingress-nginx-admission
  namespace: ingress-nginx
---
apiVersion: v1
data:
  allow-snippet-annotations: "false"
kind: ConfigMap
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-controller
  namespace: ingress-nginx
---
apiVersion: v1
kind: Service
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-controller
  namespace: ingress-nginx
spec:
  ipFamilies:
  - IPv4
  ipFamilyPolicy: SingleStack
  ports:
  - appProtocol: http
    name: http
    port: 80
    protocol: TCP
    targetPort: http
  - appProtocol: https
    name: https
    port: 443
    protocol: TCP
    targetPort: https
  selector:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
  type: NodePort
---
apiVersion: v1
kind: Service
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-controller-admission
  namespace: ingress-nginx
spec:
  ports:
  - appProtocol: https
    name: https-webhook
    port: 443
    targetPort: webhook
  selector:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
  type: ClusterIP
---
apiVersion: apps/v1
kind: Deployment
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-controller
  namespace: ingress-nginx
spec:
  minReadySeconds: 0
  revisionHistoryLimit: 10
  selector:
    matchLabels:
      app.kubernetes.io/component: controller
      app.kubernetes.io/instance: ingress-nginx
      app.kubernetes.io/name: ingress-nginx
  strategy:
    rollingUpdate:
      maxUnavailable: 1
    type: RollingUpdate
  template:
    metadata:
      labels:
        app.kubernetes.io/component: controller
        app.kubernetes.io/instance: ingress-nginx
        app.kubernetes.io/name: ingress-nginx
        app.kubernetes.io/part-of: ingress-nginx
        app.kubernetes.io/version: 1.9.0
    spec:
      hostNetwork: true
      containers:
      - args:
        - /nginx-ingress-controller
        - --election-id=ingress-nginx-leader
        - --controller-class=k8s.io/ingress-nginx
        - --ingress-class=nginx
        - --configmap=$(POD_NAMESPACE)/ingress-nginx-controller
        - --validating-webhook=:8443
        - --validating-webhook-certificate=/usr/local/certificates/cert
        - --validating-webhook-key=/usr/local/certificates/key
        env:
        - name: POD_NAME
          valueFrom:
            fieldRef:
              fieldPath: metadata.name
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        - name: LD_PRELOAD
          value: /usr/local/lib/libmimalloc.so
        image: giantswarm/ingress-nginx-controller:v1.9.0
        imagePullPolicy: IfNotPresent
        lifecycle:
          preStop:
            exec:
              command:
              - /wait-shutdown
        livenessProbe:
          failureThreshold: 5
          httpGet:
            path: /healthz
            port: 10254
            scheme: HTTP
          initialDelaySeconds: 10
          periodSeconds: 10
          successThreshold: 1
          timeoutSeconds: 1
        name: controller
        ports:
        - containerPort: 80
          name: http
          protocol: TCP
        - containerPort: 443
          name: https
          protocol: TCP
        - containerPort: 8443
          name: webhook
          protocol: TCP
        readinessProbe:
          failureThreshold: 3
          httpGet:
            path: /healthz
            port: 10254
            scheme: HTTP
          initialDelaySeconds: 10
          periodSeconds: 10
          successThreshold: 1
          timeoutSeconds: 1
        resources:
          requests:
            cpu: 100m
            memory: 90Mi
        securityContext:
          allowPrivilegeEscalation: true
          capabilities:
            add:
            - NET_BIND_SERVICE
            drop:
            - ALL
          runAsUser: 101
        volumeMounts:
        - mountPath: /usr/local/certificates/
          name: webhook-cert
          readOnly: true
      dnsPolicy: ClusterFirst
      nodeSelector:
        kubernetes.io/os: linux
      serviceAccountName: ingress-nginx
      terminationGracePeriodSeconds: 300
      volumes:
      - name: webhook-cert
        secret:
          secretName: ingress-nginx-admission
---
apiVersion: batch/v1
kind: Job
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission-create
  namespace: ingress-nginx
spec:
  template:
    metadata:
      labels:
        app.kubernetes.io/component: admission-webhook
        app.kubernetes.io/instance: ingress-nginx
        app.kubernetes.io/name: ingress-nginx
        app.kubernetes.io/part-of: ingress-nginx
        app.kubernetes.io/version: 1.9.0
      name: ingress-nginx-admission-create
    spec:
      containers:
      - args:
        - create
        - --host=ingress-nginx-controller-admission,ingress-nginx-controller-admission.$(POD_NAMESPACE).svc
        - --namespace=$(POD_NAMESPACE)
        - --secret-name=ingress-nginx-admission
        env:
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        image: dyrnq/kube-webhook-certgen:v20230407
        imagePullPolicy: IfNotPresent
        name: create
        securityContext:
          allowPrivilegeEscalation: false
      nodeSelector:
        kubernetes.io/os: linux
      restartPolicy: OnFailure
      securityContext:
        fsGroup: 2000
        runAsNonRoot: true
        runAsUser: 2000
      serviceAccountName: ingress-nginx-admission
---
apiVersion: batch/v1
kind: Job
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission-patch
  namespace: ingress-nginx
spec:
  template:
    metadata:
      labels:
        app.kubernetes.io/component: admission-webhook
        app.kubernetes.io/instance: ingress-nginx
        app.kubernetes.io/name: ingress-nginx
        app.kubernetes.io/part-of: ingress-nginx
        app.kubernetes.io/version: 1.9.0
      name: ingress-nginx-admission-patch
    spec:
      containers:
      - args:
        - patch
        - --webhook-name=ingress-nginx-admission
        - --namespace=$(POD_NAMESPACE)
        - --patch-mutating=false
        - --secret-name=ingress-nginx-admission
        - --patch-failure-policy=Fail
        env:
        - name: POD_NAMESPACE
          valueFrom:
            fieldRef:
              fieldPath: metadata.namespace
        image: dyrnq/kube-webhook-certgen:v20230407
        imagePullPolicy: IfNotPresent
        name: patch
        securityContext:
          allowPrivilegeEscalation: false
      nodeSelector:
        kubernetes.io/os: linux
      restartPolicy: OnFailure
      securityContext:
        fsGroup: 2000
        runAsNonRoot: true
        runAsUser: 2000
      serviceAccountName: ingress-nginx-admission
---
apiVersion: networking.k8s.io/v1
kind: IngressClass
metadata:
  labels:
    app.kubernetes.io/component: controller
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: nginx
spec:
  controller: k8s.io/ingress-nginx
---
apiVersion: admissionregistration.k8s.io/v1
kind: ValidatingWebhookConfiguration
metadata:
  labels:
    app.kubernetes.io/component: admission-webhook
    app.kubernetes.io/instance: ingress-nginx
    app.kubernetes.io/name: ingress-nginx
    app.kubernetes.io/part-of: ingress-nginx
    app.kubernetes.io/version: 1.9.0
  name: ingress-nginx-admission
webhooks:
- admissionReviewVersions:
  - v1
  clientConfig:
    service:
      name: ingress-nginx-controller-admission
      namespace: ingress-nginx
      path: /networking/v1/ingresses
  failurePolicy: Fail
  matchPolicy: Equivalent
  name: validate.nginx.ingress.kubernetes.io
  rules:
  - apiGroups:
    - networking.k8s.io
    apiVersions:
    - v1
    operations:
    - CREATE
    - UPDATE
    resources:
    - ingresses
  sideEffects: None

部署ingress-nginx

kubectl apply -f ingress-nginx.yaml

# 查看ingress-nginx是否部署成功
[root@master containerd]# kubectl  get all -n ingress-nginx
NAME                                           READY   STATUS      RESTARTS   AGE
pod/ingress-nginx-admission-create-mr7t8       0/1     Completed   0          70m
pod/ingress-nginx-admission-patch-hnv5n        0/1     Completed   0          70m
pod/ingress-nginx-controller-8dbf764f7-dzwtl   1/1     Running     0          3m14s

NAME                                         TYPE        CLUSTER-IP       EXTERNAL-IP   PORT(S)                      AGE
service/ingress-nginx-controller             NodePort    10.97.182.16     <none>        80:32542/TCP,443:31704/TCP   70m
service/ingress-nginx-controller-admission   ClusterIP   10.102.179.254   <none>        443/TCP                      70m

NAME                                       READY   UP-TO-DATE   AVAILABLE   AGE
deployment.apps/ingress-nginx-controller   1/1     1            1           70m

NAME                                                  DESIRED   CURRENT   READY   AGE
replicaset.apps/ingress-nginx-controller-544b486766   0         0         0       70m
replicaset.apps/ingress-nginx-controller-8dbf764f7    1         1         1       3m14s

NAME                                       COMPLETIONS   DURATION   AGE
job.batch/ingress-nginx-admission-create   1/1           15s        70m
job.batch/ingress-nginx-admission-patch    1/1           18s        70m

测试ingress-nginx

---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: nginx-deployment
  namespace: testing-sc
spec:
  replicas: 2
  selector:
    matchLabels:
      app: nginx-pod
  template:
    metadata:
      labels:
        app: nginx-pod
    spec:
      containers:
      - name: nginx
        image: nginx:latest
        ports:
        - containerPort: 80

---
apiVersion: apps/v1
kind: Deployment
metadata:
  name: tomcat-deployment
  namespace: testing-sc
spec:
  replicas: 2
  selector:
    matchLabels:
      app: tomcat-pod
  template: 
    metadata:
      labels:
        app: tomcat-pod
    spec:
      containers:
      - name: tomcat
        image: tomcat:8.0-alpine
        ports:
        - containerPort: 8080

---
apiVersion: v1
kind: Service
metadata:
  name: nginx-service
  namespace: testing-sc
spec:
  selector:
    app: nginx-pod
  type: ClusterIP
  ports:
  - port: 80
    name: http
    protocol: TCP
    targetPort: 80
---
apiVersion: v1
kind: Service
metadata:
  name: tomcat-service
  namespace: testing-sc
spec:
  selector:
    app: tomcat-pod
  type: ClusterIP
  ports:
  - port: 8080
    name: http
    protocol: TCP
    targetPort: 8080


---
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: test-ingress
  namespace: testing-sc
spec:
  ingressClassName: nginx
  rules:
  - host: "tomcat.demo.com"
    http:
      paths:
      - pathType: Prefix
        path: "/"
        backend:
          service:
            name: tomcat-service
            port:
              number: 8080
  - host: "nginx.demo.com"
    http:
      paths:
      - pathType: Prefix
        path: "/"
        backend:
          service:
            name: nginx-service
            port:
              number: 80


# 备注，我省略了名称空间的配置，因为在这之前，我已经有了testing-sc的名称空间，如果没有，可以使用如下命令创建
kubectl create ns testing-sc
# 或者使用如下yaml
apiVersion: v1
kind: Namespace
metadata:
   name: testing-sc

准备就续之后，应用配置文件到集群

kubectl  apply -f nginx-tomcat-test.yaml

# 查看部署情况
kubectl get all -n testing-sc

在hosts文件中写入域名解析

192.168.0.139 nginx.demo.com tomcat.demo.com
# ingress-nginx调度到哪个节点上 就写哪个节点的ip(也可以绑定到具体的节点上)

K8S/Kubernetes

K8S/Kubernetes社区为您提供最前沿的新闻资讯和知识内容

更多推荐

【深度】阿里巴巴万级规模 K8s 集群全局高可用体系之美

作者 | 韩堂、柘远、沉醉来源 | 阿里巴巴云原生公众号前言台湾作家林清玄在接受记者采访的时候，如此评价自己 30 多年写作生涯：“第一个十年我才华横溢，‘贼光闪现’，令周边黯然失色；第二个十年，我终于‘宝光现形’，不再去抢风头，反而与身边的美丽相得益彰；进入第三个十年，繁华落尽见真醇，我进入了‘醇光初现’的阶段，真正体味到了境界之美”。长夜有穷，真水无香。领略过了 K8s“身在江

K8S/Kubernetes

如何基于 K8s 构建下一代 DevOps 平台？

作者 | 孙健波（天元）导读：当前云原生 DevOps 体系现状如何？面临哪些挑战？如何通过 OAM 解决云原生 DevOps 场景下的诸多问题？云原生开发应用模型 OAM(Open Application Model) 社区核心成员孙健波将为大家一一解答，并分享如何基于 OAM 和 Kubernetes 打造无限能力的下一代 DevOps 平台。什么是 DevOps？为什么基于 Kub