先决条件

安装以下软件包：git, kubectl, helm, helm-docs，请参阅本教程。

1、安装 helm

wget https://xxx-xx.oss-cn-xxx.aliyuncs.com/helm-v3.8.1-linux-amd64.tar.gz
tar xvzf helm-v3.8.1-linux-amd64.tar.gz
mv linux-amd64/helm /usr/local/bin
rm -rf linux-amd64

2、安装victoria-metrics-alert

(1)使用以下命令添加 helm chart存储库

helm repo add vm https://victoriametrics.github.io/helm-charts/

helm repo update

(2)列出vm/victoria-metrics-alert可供安装的helm版本

helm search repo vm/victoria-metrics-alert -l

(3)victoria-metrics-alert将图表的默认值导出到文件values.yaml

helm show values vm/victoria-metrics-alert > values.yaml

(4)根据环境需要更改values.yaml文件中的值，完整配置参考如下

# Default values for victoria-metrics-alert.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.

serviceAccount:
  # Specifies whether a service account should be created
  create: true
  # Annotations to add to the service account
  annotations: {}
  # The name of the service account to use.
  # If not set and create is true, a name is generated using the fullname template
  name:
  # mount API token to pod directly
  automountToken: true

imagePullSecrets: []

rbac:
  create: true
  pspEnabled: true
  namespaced: false
  extraLabels: {}
  annotations: {}

server:
  name: server
  enabled: true
  image:
    repository: victoriametrics/vmalert
    tag: "" # rewrites Chart.AppVersion
    pullPolicy: IfNotPresent
  nameOverride: ""
  fullnameOverride: ""

  ## See `kubectl explain poddisruptionbudget.spec` for more
  ## ref: https://kubernetes.io/docs/tasks/run-application/configure-pdb/
  podDisruptionBudget:
    enabled: false
    # minAvailable: 1
    # maxUnavailable: 1
    labels: {}

  # -- Additional environment variables (ex.: secret tokens, flags) https://github.com/VictoriaMetrics/VictoriaMetrics#environment-variables
  env:
    []
    # - name: VM_remoteWrite_basicAuth_password
    #   valueFrom:
    #     secretKeyRef:
    #       name: auth_secret
    #       key: password

  replicaCount: 1

  # deployment strategy, set to standard k8s default
  strategy:
    type: RollingUpdate
    rollingUpdate:
      maxSurge: 25%
      maxUnavailable: 25%

  # specifies the minimum number of seconds for which a newly created Pod should be ready without any of its containers crashing/terminating
  # 0 is the standard k8s default
  minReadySeconds: 0

  # vmalert reads metrics from source, next section represents its configuration. It can be any service which supports
  # MetricsQL or PromQL.
  datasource:
    url: "http://192.168.47.9:8481/select/0/prometheus/"
    basicAuth:
      username: ""
      password: ""

  remote:
    write:
      url: ""
    read:
      url: ""

  notifier:
    alertmanager:
      url: "http://192.168.112.68:9093"

  extraArgs:
    envflag.enable: "true"
    envflag.prefix: VM_
    loggerFormat: json

  # Additional hostPath mounts
  extraHostPathMounts:
    []
    # - name: certs-dir
    #   mountPath: /etc/kubernetes/certs
    #   subPath: ""
    #   hostPath: /etc/kubernetes/certs
  #   readOnly: true

  # Extra Volumes for the pod
  extraVolumes:
    []
     #- name: example
     #  configMap:
     #    name: example

  # Extra Volume Mounts for the container
  extraVolumeMounts:
    []
    # - name: example
    #   mountPath: /example

  extraContainers:
    []
    #- name: config-reloader
    #  image: reloader-image

  service:
    annotations: {}
    labels: {}
    clusterIP: ""
    ## Ref: https://kubernetes.io/docs/user-guide/services/#external-ips
    ##
    externalIPs: []
    loadBalancerIP: ""
    loadBalancerSourceRanges: []
    servicePort: 8880
    type: ClusterIP
    # Ref: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/#preserving-the-client-source-ip
    # externalTrafficPolicy: "local"
    # healthCheckNodePort: 0

  ingress:
    enabled: false
    annotations: {}
    #   kubernetes.io/ingress.class: nginx
    #   kubernetes.io/tls-acme: 'true'

    extraLabels: {}
    hosts: []
    #   - name: vmselect.local
    #     path: /select
    #     port: http

    tls: []
    #   - secretName: vmselect-ingress-tls
    #     hosts:
    #       - vmselect.local

    # For Kubernetes >= 1.18 you should specify the ingress-controller via the field ingressClassName
    # See https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/#specifying-the-class-of-an-ingress
    # ingressClassName: nginx
    # -- pathType is only for k8s >= 1.1=
    pathType: Prefix

  podSecurityContext: {}
  # fsGroup: 2000

  securityContext:
    {}
    # capabilities:
    #   drop:
    #   - ALL
    # readOnlyRootFilesystem: true
    # runAsNonRoot: true
  # runAsUser: 1000

  resources:
    {}
    # We usually recommend not to specify default resources and to leave this as a conscious
    # choice for the user. This also increases chances charts run on environments with little
    # resources, such as Minikube. If you do want to specify resources, uncomment the following
    # lines, adjust them as necessary, and remove the curly braces after 'resources:'.
    # limits:
    #   cpu: 100m
    #   memory: 128Mi
    # requests:
    #   cpu: 100m
  #   memory: 128Mi

  # Annotations to be added to the deployment
  annotations: {}
  # labels to be added to the deployment
  labels: {}

  # Annotations to be added to pod
  podAnnotations: {}

  podLabels: {}

  nodeSelector: {}

  priorityClassName: ""

  tolerations: []

  affinity: {}

  # vmalert alert rules configuration configuration:
  # use existing configmap if specified
  # otherwise .config values will be used
  configMap: ""
  config:
    alerts:
      groups:
          - name: 磁盘挂载错误
            rules:
            - alert: 磁盘挂载错误
              expr: mount_error == 1
              for: 1m
              labels:
                level: 1
                severity: warning
              annotations:
                description: "{{$labels.job}}链{{$labels.instance}}节点磁盘挂载错误！"

serviceMonitor:
  enabled: false
  extraLabels: {}
  annotations: {}
#    interval: 15s
#    scrapeTimeout: 5s
  # -- Commented. HTTP scheme to use for scraping.
#    scheme: https
  # -- Commented. TLS configuration to use when scraping the endpoint
#    tlsConfig:
#      insecureSkipVerify: true

alertmanager:
  enabled: true
  replicaCount: 1
  podMetadata:
    labels: {}
    annotations: {}
  image: prom/alertmanager
  tag: v0.20.0
  retention: 120h
  nodeSelector: {}
  priorityClassName: ""
  resources: {}
  tolerations: []
  imagePullSecrets: []
  podSecurityContext: {}
  extraArgs: {}
  # key: value

  # external URL, that alertmanager will expose to receivers
  baseURL: ""
  # use existing configmap if specified
  # otherwise .config values will be used
  configMap: ""
  config:
    global:
      resolve_timeout: 5m
    route:
      # default receiver
      receiver: ops_notify
      # tag to group by
      group_by: [alertname]
      # How long to initially wait to send a notification for a group of alerts
      group_wait: 30s
      # How long to wait before sending a notification about new alerts that are added to a group
      group_interval: 60s
      # How long to wait before sending a notification again if it has already been sent successfully for an alert
      repeat_interval: 1h
    receivers:
      - name: ops_notify
        webhook_configs:
        - url: http://192.168.157.59:8080/prometheusalert?type=dd&tpl=prometheus-dd&split=false
          send_resolved: true
    inhibit_rules:
      - source_match:
          severity: 'warning'
        target_match:
          severity: 'warning'
        equal: ['alertname', 'job']

  templates: {}
  #  alertmanager.tmpl: |-
  service:
    annotations: {}
    type: ClusterIP
    port: 9093
    # if you want to force a specific nodePort. Must be use with service.type=NodePort
    # nodePort:
  ingress:
    enabled: false
    annotations: {}
    #   kubernetes.io/ingress.class: nginx
    #   kubernetes.io/tls-acme: 'true'
    extraLabels: {}
    hosts: []
    #   - name: alertmanager.local
    #     path: /
    #     port: web

    tls: []
    #   - secretName: alertmanager-ingress-tls
    #     hosts:
    #       - alertmanager.local

    # For Kubernetes >= 1.18 you should specify the ingress-controller via the field ingressClassName
    # See https://kubernetes.io/blog/2020/04/02/improvements-to-the-ingress-api-in-kubernetes-1.18/#specifying-the-class-of-an-ingress
    # ingressClassName: nginx
    # -- pathType is only for k8s >= 1.1=
    pathType: Prefix
  persistentVolume:
    # -- Create/use Persistent Volume Claim for alertmanager component. Empty dir if false
    enabled: false
    # -- Array of access modes. Must match those of existing PV or dynamic provisioner. Ref: [http://kubernetes.io/docs/user-guide/persistent-volumes/](http://kubernetes.io/docs/user-guide/persistent-volumes/)
    accessModes:
      - ReadWriteOnce
    # -- Persistant volume annotations
    annotations: {}
    # -- StorageClass to use for persistent volume. Requires alertmanager.persistentVolume.enabled: true. If defined, PVC created automatically
    storageClass: ""
    # -- Existing Claim name. If defined, PVC must be created manually before volume will be bound
    existingClaim: ""
    # -- Mount path. Alertmanager data Persistent Volume mount root path.
    mountPath: /data
    # -- Mount subpath
    subPath: ""
    # -- Size of the volume. Better to set the same as resource limit memory property.
    size: 50Mi

(5)使用命令测试安装：

helm install vmalert vm/victoria-metrics-alert -f values.yaml -n victoria-metrics --debug --dry-run

(6)使用以下命令安装

helm install vmalert vm/victoria-metrics-alert -f values.yaml -n victoria-metrics

(7)通过运行以下命令获取 pod 列表

kubectl get pods -A | grep 'alert'

(8)通过运行以下命令获取应用程序

helm list -f vmalert -n victoria-metrics

(9)使用命令查看应用程序版本的历史记录vmalert

helm history vmalert -n victoria-metrics

(10)更新配置

cd /root/vmalert
#修改value.yaml文件
helm upgrade vmalert vm/victoria-metrics-alert -f values.yaml -n victoria-metrics

(11)查看service

kubectl get svc -n victoria-metrics

3、安装prometheusalert

(1)使用helm部署

git clone https://github.com/feiyu563/PrometheusAlert.git
cd PrometheusAlert/example/helm/prometheusalert
#如需修改配置文件,请更新config中的app.conf
helm install -n victoria-metrics prometheus-alert .

(2)values.yaml配置文件参考

cat /root/PrometheusAlert/example/helm/prometheusalert/values.yaml

# Default values for prometheusalert.
# This is a YAML-formatted file.
# Declare variables to be passed into your templates.

global:
  imagePullSecrets: []
    # - name: "registry-secret"

replicaCount: 1

image:
  # 支持配置自定义模版需要重出镜像，或者使用本人构建镜像：lusson/prometheusalert:v1.0
  repository: feiyu563/prometheus-alert:v4.8
  pullPolicy: IfNotPresent

nameOverride: ""
fullnameOverride: ""

service:
  type: ClusterIP
  port: 8080

ingress:
  enabled: true
  annotations: {}
    # kubernetes.io/ingress.class: nginx
    # kubernetes.io/tls-acme: "true"
  hosts:
    - host: prometheusalert.xxxxx.com
      paths: ["/"]

  tls: []

resources:
  limits:
   cpu: 1000m
   memory: 1024Mi
  requests:
   cpu: 100m
   memory: 128Mi

nodeSelector: {}

tolerations: []

affinity: {}

(3)app.conf配置参考

cat /root/PrometheusAlert/example/helm/prometheusalert/config/app.conf

(4)ingress.yaml配置参考

cat /root/PrometheusAlert/example/helm/prometheusalert/templates/ingress.yaml

{{- if .Values.ingress.enabled -}}
{{- $fullName := include "prometheusalert.fullname" . -}}
{{- $svcPort := .Values.service.port -}}
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata:
  name: {{ $fullName }}
  labels:
{{ include "prometheusalert.labels" . | indent 4 }}
  {{- with .Values.ingress.annotations }}
  annotations:
    {{- toYaml . | nindent 4 }}
  {{- end }}
spec:
{{- if .Values.ingress.tls }}
  tls:
  {{- range .Values.ingress.tls }}
    - hosts:
      {{- range .hosts }}
        - {{ . | quote }}
      {{- end }}
      secretName: {{ .secretName }}
  {{- end }}
{{- end }}
  rules:
  {{- range .Values.ingress.hosts }}
    - host: {{ .host | quote }}
      http:
        paths:
        {{- range .paths }}
          - path: {{ . }}
            pathType: Prefix
            backend:
              service:
                name: {{ $fullName }}
                port:
                  number: {{ $svcPort }}
        {{- end }}
  {{- end }}
{{- end }}

(5)更新配置

cd /root/PrometheusAlert/example/helm/prometheusalert
helm upgrade -n victoria-metrics prometheus-alert .

(6)重启pod

删除Pod
helm delete prometheus-alert -n victoria-metrics

查看pods和service
kubectl get pods -n victoria-metrics
kubectl get svc -n victoria-metrics

重新安装
helm install -n victoria-metrics prometheus-alert .

查看pods和service
kubectl get pods -n victoria-metrics
kubectl get svc -n victoria-metrics

(1)告警测试

模板内容：

{{ $var := .externalURL}}{{ range $k,$v:=.alerts }}
{{if eq $v.status "resolved"}}
## [巡检恢复信息]({{$v.generatorURL}})
#### [{{$v.labels.alertname}}]({{$var}})
###### 告警级别：{{$v.labels.level}}
###### 开始时间：{{$v.startsAt}}
###### 故障主机：{{$v.labels.instance}}
##### {{$v.annotations.description}}
{{else}}
## [巡检告警信息]({{$v.generatorURL}})
#### [{{$v.labels.alertname}}]({{$var}})
###### 告警级别：{{$v.labels.level}}
###### 开始时间：{{$v.startsAt}}
###### 故障主机：{{$v.labels.instance}}
##### {{$v.annotations.description}}
{{end}}
{{ end }}

(2)查看日志

(3)查看钉钉告警

参考文档：https://github.com/VictoriaMetrics/helm-charts/tree/master/charts/victoria-metrics-alert

参考文档：https://github.com/feiyu563/PrometheusAlert/tree/master/example/helm/prometheusalert