ansible部署k8s多master、多node集群以及dashboard、dns、grafana

ansible自动部署k8s（集群环境全为ubuntu18.04）1.分别准备集群环境的两个master以及个node节点，这里以k8s-master1为例1）所有节点均在nat网络模式下，避免后面集群部署有可能出现pod无法启动的问题2）再配置nat网络的ip，指定其网关和服务器iproot@k8s-master1:~# vim /etc/netplan/01-netcfg.yaml...

caolun0691

2051人浏览 · 2019-08-25 10:20:45

caolun0691 · 2019-08-25 10:20:45 发布

ansible自动部署k8s（集群环境全为ubuntu18.04）
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

1.分别准备集群环境的两个master以及个node节点，这里以k8s-master1为例

1）所有节点均在nat网络模式下，避免后面集群部署有可能出现pod无法启动的问题

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

2）再配置nat网络的ip，指定其网关和服务器ip

root@k8s-master1:~# vim /etc/netplan/01-netcfg.yaml
network:

    version: 2

    renderer: networkd

    ethernets:

        eth0:

            dhcp4: no

            addresses: [192.168.30.10/24]
            gateway4: 192.168.30.2
            nameservers:
                addresses: [192.168.30.2]

3）使网络ip生效

root@k8s-master1:~# netplan apply

4）查看本机ip，以及测试网络

root@k8s-master1:~# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
             valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
             valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
        link/ether 00:0c:29:83:c3:2e brd ff:ff:ff:ff:ff:ff
        inet 192.168.30.10/24 brd 192.168.30.255 scope global eth0
             valid_lft forever preferred_lft forever
        inet6 fe80::20c:29ff:fe83:c32e/64 scope link 
             valid_lft forever preferred_lft forever
root@k8s-master1:~# ping www.baidu.com
PING www.a.shifen.com (61.135.169.125) 56(84) bytes of data.
64 bytes from 61.135.169.125 (61.135.169.125): icmp_seq=1 ttl=128 time=7.14 ms
64 bytes from 61.135.169.125 (61.135.169.125): icmp_seq=2 ttl=128 time=7.39 ms
64 bytes from 61.135.169.125 (61.135.169.125): icmp_seq=3 ttl=128 time=7.11 ms
……

5）将仓库源改为阿里云

root@k8s-master1:~# vim /etc/apt/sources.list
deb http://mirrors.aliyun.com/ubuntu/ bionic main restricted universe multiverse

deb-src http://mirrors.aliyun.com/ubuntu/ bionic main restricted universe multiverse

deb http://mirrors.aliyun.com/ubuntu/ bionic-security main restricted universe multiverse

deb-src http://mirrors.aliyun.com/ubuntu/ bionic-security main restricted universe multiverse

deb http://mirrors.aliyun.com/ubuntu/ bionic-updates main restricted universe multiverse

deb-src http://mirrors.aliyun.com/ubuntu/ bionic-updates main restricted universe multiverse

deb http://mirrors.aliyun.com/ubuntu/ bionic-proposed main restricted universe multiverse

deb-src http://mirrors.aliyun.com/ubuntu/ bionic-proposed main restricted universe multiverse

deb http://mirrors.aliyun.com/ubuntu/ bionic-backports main restricted universe multiverse

deb-src http://mirrors.aliyun.com/ubuntu/ bionic-backports main restricted universe multiverse

6）更新修改后的仓库源

root@k8s-master1:~# apt-get update

7）升级所有已安装的软件包

root@k8s-master1:~# apt-get upgrade

8）安依赖的python2.7的环境，除了harbor镜像仓库和haproxy调度服务不需要安装，其他所有集群maste、node、etcd节点都需安装python2.7

root@k8s-master1:~#  apt-get install   install python2.7  python-pip -y
root@k8s-master1:~#ln -s /usr/bin/python2.7 /usr/bin/python  #创建一个软连接

9）除了haproxy调度服务和集群中的etcd不装docker，其他所有节点都要安装docker

curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun  #在各节点执行此命令安装docker
10）所有需要在harbor仓库拉取镜像的节点，需要编辑名字解析hosts文件或指定配置好的DNS服务
root@k8s-master1:~#vim /etc/hosts
……
192.168.30.40  www.harbor.com
……

2.搭建harbor镜像仓库

1）准备harbor压缩文件包

[root@harbor1 src]# pwd
/usr/local/src
[root@harbor1 src]# ll
-rw-r--r-- 1 root root 580059210 Jul  5 16:47 harbor-offline-installer-v1.7.5.tgz

2）解压到当前目录

[root@harbor1 src]# tar xvf harbor-offline-installer-v1.7.5.tgz

3）进入到解压生成的harbor文件夹并查看该目录下所有文件

[root@harbor1 src]# cd harbor/
[root@harbor1 harbor]# ll
total 572840
drwxr-xr-x 3 root root        23 Aug 14 19:08 common
-rw-r--r-- 1 root root       939 Apr  1 12:07 docker-compose.chartmuseum.yml
-rw-r--r-- 1 root root       975 Apr  1 12:07 docker-compose.clair.yml
-rw-r--r-- 1 root root      1434 Apr  1 12:07 docker-compose.notary.yml
-rw-r--r-- 1 root root      5608 Apr  1 12:07 docker-compose.yml
-rw-r--r-- 1 root root      8033 Apr  1 12:07 harbor.cfg
-rw-r--r-- 1 root root 585234819 Apr  1 12:08 harbor.v1.7.5.tar.gz
-rwxr-xr-x 1 root root      5739 Apr  1 12:07 install.sh
-rw-r--r-- 1 root root     11347 Apr  1 12:07 LICENSE
-rw-r--r-- 1 root root   1263409 Apr  1 12:07 open_source_license
-rwxr-xr-x 1 root root     36337 Apr  1 12:07 prepare

4）创建harbor的ssl证书

[root@harbor1 harbor]# mkdir certs
[root@harbor1 certs]# openssl genrsa -out harbor_ca.key  #生成证书私钥
Generating RSA private key, 2048 bit long modulus
...................+++
............................................................................................................................+++
e is 65537 (0x10001)
[root@harbor1 certs]# ll     #查看生成的证书私钥
total 4
-rw-r--r-- 1 root root 1679 Aug 14 19:20 harbor_ca.key
[root@harbor1 harbor]# openssl req -x509 -new -nodes -key harbor_ca.key -subj /CN=www.harbor.com -days 3650 -out harbor_ca.crt   #生成证书文件

5)修改harbor.cfg配置文件

[root@harbor1 harbor]# vim harbor.cfg
hostname = www.harbor.com   #访问harbor服务器的域名
ui_url_protocol = https  #强制指定为https加密
ssl_cert = /usr/local/src/harbor/certs/harbor_ca.crt  #指定公钥文件（即自签名证书）路径
ssl_cert_key = /usr/local/src/harbor/certs/harbor_ca.key  #指定私钥文件路径
harbor_admin_password = 123456   #登录harbor仓库的密码    
……

6）本机host文件域名解析或添加入DNS域名解析服务器

[root@harbor1 harbor]# vim /etc/hosts
……
192.168.30.40 www.harbor.com

7）安装docker和docker-compose

[root@harbor1 harbor]#curl -fsSL https://get.docker.com | bash -s docker --mirror Aliyun #安装docker
[root@harbor1 harbor]#apt-install dokcer-comose -y #安装docker-compose

8）启动docker

[root@harbor1 ~]# systemctl start docker
[root@harbor1 ~]# systemctl enable docker

9）开始安装harbor

[root@harbor1 harbor]# pwd
/usr/local/src/harbor
[root@harbor1 harbor]# ./install.sh

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

10）浏览器测试访问harbor，登录harbor仓库

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

11）成功登录harbor主界面

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

12)新建一个项目并公开

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

13.复制harbor服务器的证书公钥至k8s-master1，并在k8s-master1端进行镜像拉取上传测试

是否能够拉取或者上传镜像至harbor仓库取决于：含有harbor的公钥证书文件和能够解析此harbor服务的域名

1）在harbor1端复制证书文件至k8s-master1服务端

[root@k8s-master1 ~]#mkdir -p /etc/docker/certs.d/www.harbor.com/ #先在k8s-master1节点创建docker下的存放harbor服务的证书目录
[root@harbor1 ~]# scp /usr/local/src/harbor/certs/harbor_ca.crt 192.168.30.10:/etc/docker/certs.d/www.harbor.com/ #在harbor节点复制证书至master节点

2）输入admin秘钥登录harbor成功

[root@k8s-master1 ~]# docker login www.harbor.com
Username: admin  
Password: 
Login Succeeded

root@k8s-master1:~# cat /root/.docker/config.json  #以上登录成功后会自动生成此harbor服务的认证文件，下次登录就无需密码
{
    "auths": {
        "www.harbor.com": {
            "auth": "YWRtaW46MTIzNDU2"
        }
    },
    "HttpHeaders": {
        "User-Agent": "Docker-Client/19.03.1 (linux)"
    }

3）拉取测试镜像

[root@k8s-master1 ~]# docker pull alpine
Using default tag: latest
Trying to pull repository docker.io/library/alpine ... 
latest: Pulling from docker.io/library/alpine
050382585609: Pull complete 
Digest: sha256:6a92cd1fcdc8d8cdec60f33dda4db2cb1fcdcacf3410a8e05b3741f44a9b5998
Status: Downloaded newer image for docker.io/alpine:latest

4）推送镜像至harbor仓库

[root@k8s-master1 ~]# docker tag alpine:latest www.harbor.com/base-images/alpine:v1 #修改tag版本号
[root@k8s-master1 ~]# docker push www.harbor.com/base-images/alpine #推送至harbor仓库
The push refers to a repository [www.harbor.com/base-images/alpine]
1bfeebd65323: Pushed 
v1: digest: sha256:57334c50959f26ce1ee025d08f136c2292c128f84e7b229d1b0da5dac89e9866 size: 528

5）在harbor端检查镜像是否上传成功

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

4.复制证书文件、远程免秘钥登录到各节点服务端

1）k8s-master1端安装sshpass包，已实现在命令行直接输入秘钥登录远程服务端

[root@k8s-master1 ~]# apt-get install sshpass -y

2）k8s-master1端生成密钥对

[root@k8s-master1 ~]# ssh-keygen
The key's randomart image is:
+---[RSA 2048]----+
| +oo.=X=o.       |
|. o ==oBo.       |
|.. +.o*.=        |
| .o..ooBooo      |
|  . ..=.SE       |
|   o   =++..     |
|  .     o.o      |
|                 |
|                 |
+----[SHA256]-----+

3）将harbor服务器的cert证书先复制一份到k8s-master1端

[root@harbor1 ~]# scp /usr/local/src/harbor/certs/harbor_ca.crt 192.168.30.10:/etc/docker/certs.d/www.harbor.com

4）k8s-master1端制作脚本实现远程免秘钥登录各服务端、批量发送harbor证书至各服务端

[root@k8s-master1 data]# vim scp_pass_crt.sh
#!/bin/bash 
#目标主机列表 
IP="192.168.30.10 \ 
192.168.30.11 \ 
192.168.30.40 \
192.168.30.50 \
192.168.30.51 \
192.168.30.52 \
192.168.30.60 \
192.168.30.61 \
192.168.30.62"

for node in ${IP};do
    sshpass -p 123456 ssh-copy-id  ${node}  -o StrictHostKeyChecking=no
    if [ $? -eq 0 ];then  
            echo "${node} 秘钥copy完成"    
            echo "${node} 秘钥copy完成,准备环境初始化....."
            ssh  ${node}  "mkdir /etc/docker/certs.d/www.harbor.com -p"
            echo "Harbor 证书目录创建成功!"
            scp /etc/docker/certs.d/www.harbor.com/harbor_ca.crt ${node}:/etc/docker/certs.d/www.harbor.com/harbor_ca.crt
            scp -r /root/.docker ${node}:/root/   #复制docker登录harbor仓库生成的认证文件至各节点
        echo "Harbor 证书拷贝成功!" 
    else
                echo "${node} 秘钥copy失败"
    fi done

5）执行命令

[root@k8s-master1 data]# bash scp_pass_crt.sh

5.分别配置两台主备keepalived+haproxy高可用调度服务（要确保调度器与集群环境时间同步避免报错）

1）配置keepalived配置文件再启动keepalived服务

[root@keepalive_haproxy ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived

global_defs {
     notification_email {
         acassen@firewall.loc
         failover@firewall.loc
         sysadmin@firewall.loc
     }
     notification_email_from Alexandre.Cassen@firewall.loc
     smtp_server 192.168.200.1
     smtp_connect_timeout 30
     router_id keep1
     vrrp_skip_check_adv_addr
    # vrrp_strict
     vrrp_iptables
     vrrp_garp_interval 0
     vrrp_gna_interval 0
}

vrrp_instance VI_1 {
        state MASTER
        interface eth0
        virtual_router_id 51
        priority 100
        advert_int 1
        authentication {
                auth_type PASS
                auth_pass 1111
        }
        virtual_ipaddress {
                192.168.30.24 dev eth0 label eth0:0
        }
unicast_src_ip 192.168.30.20
     unicast_peer{
    192.168.30.21
}
}

2）再配置haproxy调度器

……
listen stats
 mode http
 bind 0.0.0.0:9999
stats enable
 log global
 stats uri     /haproxy-status
 stats auth    admin:123456

listen  web_port
 bind 192.168.30.24:6443
 mode tcp
 log global
 server web1  192.168.30.10:6443  check inter 3000 fall 2 rise 5  #先暂时调度一个master节点
 #server web2  192.168.30.11:6443  check inter 3000 fall 2 rise 5

6.再k8s-master1主节点端克隆项目并配置好hosts主机文件

1）安装ansible，只需此k8s-master1节点安装即可，其他节点都无需安装

[root@k8s-master1 ~]# yum install ansible -y 安装ansible

2）克隆指定集群项目版本

[root@k8s-master1 ~]# git clone -b 0.6.1 https://github.com/easzlab/kubeasz

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

3）将ansible下原有的配置文件移走

[root@k8s-master1 ~]# mv /etc/ansible/* /temp_file/

4）将克隆的项目文件全部移动到/etc/ansible/目录下

[root@k8s-master1 ~]# mv kubeasz/* /etc/ansible/

5）创建多master主机配置文件

[root@k8s-master1 ansible]# cp example/hosts.m-masters.example ./hosts #

6）修改配置文件

[root@k8s-master1 ansible]# vim hosts
# 集群部署节点：一般为运行ansible 脚本的节点
# 变量 NTP_ENABLED (=yes/no) 设置集群是否安装 chrony 时间同步
[deploy]
192.168.30.10 NTP_ENABLED=yes  #集群安装chrony 时间同步

# etcd集群请提供如下NODE_NAME，注意etcd集群必须是1,3,5,7...奇数个节点
[etcd]
192.168.30.50 NODE_NAME=etcd1
192.168.30.51 NODE_NAME=etcd2
192.168.30.52 NODE_NAME=etcd3

[new-etcd] # 预留组，后续添加etcd节点使用
#192.168.1.x NODE_NAME=etcdx

[kube-master]
192.168.30.10

[new-master] # 预留组，后续添加master节点使用
#192.168.1.5

[kube-node]
192.168.30.60
192.168.30.61

[new-node] # 预留组，后续添加node节点使用
#192.168.30.xx

# 参数 NEW_INSTALL：yes表示新建，no表示使用已有harbor服务器
# 如果不使用域名，可以设置 HARBOR_DOMAIN=""
[harbor]
#192.168.1.8 HARBOR_DOMAIN="harbor.yourdomain.com" NEW_INSTALL=no
# 负载均衡(目前已支持多于2节点，一般2节点就够了) 安装 haproxy+keepalived
#[lb]
#192.168.1.1 LB_ROLE=backup
#192.168.1.2 LB_ROLE=master

#【可选】外部负载均衡，用于自有环境负载转发 NodePort 暴露的服务等
#[ex-lb]
#192.168.1.6 LB_ROLE=backup EX_VIP=192.168.1.250
#192.168.1.7 LB_ROLE=master EX_VIP=192.168.1.250

[all:vars]
# ---------集群主要参数---------------
#集群部署模式：allinone, single-master, multi-master
DEPLOY_MODE=multi-master

#集群主版本号，目前支持: v1.8, v1.9, v1.10，v1.11, v1.12, v1.13
K8S_VER="v1.13"

# 集群 MASTER IP即 LB节点VIP地址，为区别与默认apiserver端口，设置VIP监听的服务端口8443
# 公有云上请使用云负载均衡内网地址和监听端口
MASTER_IP="192.168.30.24"
KUBE_APISERVER="https://{{ MASTER_IP }}:6443"

# 集群网络插件，目前支持calico, flannel, kube-router, cilium
CLUSTER_NETWORK="calico"

# 服务网段 (Service CIDR），注意不要与内网已有网段冲突
SERVICE_CIDR="10.20.0.0/16"

# POD 网段 (Cluster CIDR），注意不要与内网已有网段冲突
CLUSTER_CIDR="172.20.0.0/16"
# 服务端口范围 (NodePort Range)
NODE_PORT_RANGE="30000-60000"

# kubernetes 服务 IP (预分配，一般是 SERVICE_CIDR 中第一个IP)
CLUSTER_KUBERNETES_SVC_IP="10.20.0.1"

# 集群 DNS 服务 IP (从 SERVICE_CIDR 中预分配)
CLUSTER_DNS_SVC_IP="10.20.0.2"

# 集群 DNS 域名
CLUSTER_DNS_DOMAIN="jie.local."

# 集群basic auth 使用的用户名和密码
BASIC_AUTH_USER="admin"
BASIC_AUTH_PASS="123456"

# ---------附加参数--------------------
#默认二进制文件目录
bin_dir="/usr/bin"

#证书目录
ca_dir="/etc/kubernetes/ssl"

#部署目录，即 ansible 工作目录，建议不要修改
base_dir="/etc/ansible"

7.准备k8s所有二进制执行程序

1）准备k8s压缩文件

[root@k8s-master1 ~]# ll /data
-rw-r--r-- 1 root root 219910183 Jul  6 09:07 k8s.1-13-5.tar.gz

2）解压

[root@k8s-master1 ~]# tar xvf k8s.1-13-5.tar.gz

3）将k8s二进制程序文件移动到ansible的bin目录下

[root@k8s-master1 bin]# mv /data/bin/* /etc/ansible/bin/

4）执行命令测试，查看k8s的版本信息

[root@k8s-master1 bin]# ./kubelet --version 
Kubernetes v1.13.5

8.ansible部署集群环境

1）部署环境预准备prepare

[root@k8s-master1 ansible]# ansible-playbook 01.prepare.yml

changed: [192.168.30.10] => (item=cfssljson)
changed: [192.168.30.10] => (item=kubectl)

TASK [deploy : 读取ca证书stat信息] ********************************************************************************************
ok: [192.168.30.10]

TASK [deploy : 准备CA配置文件] ************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 准备CA签名请求] ************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 生成 CA 证书和私钥] *********************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 准备kubectl使用的admin 证书签名请求] ********************************************************************************
changed: [192.168.30.10]

TASK [deploy : 创建 admin证书与私钥] *******************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置集群参数] **************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置客户端认证参数] ***********************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置上下文参数] *************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 选择默认上下文] *************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 准备kube-proxy 证书签名请求] *************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 创建 kube-proxy证书与私钥] **************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置集群参数] **************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置客户端认证参数] ***********************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 设置上下文参数] *************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 选择默认上下文] *************************************************************************************************
changed: [192.168.30.10]

TASK [deploy : 移动 kube-proxy.kubeconfig] ********************************************************************************
changed: [192.168.30.10]

TASK [deploy : 安装 rsync] ************************************************************************************************
ok: [192.168.30.10]
 [WARNING]: Could not match supplied host pattern, ignoring: lb

PLAY [kube-master,kube-node,deploy,etcd,lb] *****************************************************************************

TASK [prepare : 删除centos/redhat默认安装] ************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.10]
changed: [192.168.30.51]
changed: [192.168.30.50]
changed: [192.168.30.52]

TASK [prepare : 添加EPEL仓库] ***********************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.51]
changed: [192.168.30.50]
changed: [192.168.30.10]
changed: [192.168.30.52]

TASK [prepare : 安装基础软件包] ************************************************************************************************
changed: [192.168.30.51]
changed: [192.168.30.61]
changed: [192.168.30.10]
changed: [192.168.30.50]
changed: [192.168.30.60]
changed: [192.168.30.52]

TASK [prepare : 临时关闭 selinux] *******************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.50]
changed: [192.168.30.10]
changed: [192.168.30.51]
changed: [192.168.30.52]

TASK [prepare : 永久关闭 selinux] *******************************************************************************************
ok: [192.168.30.51]
ok: [192.168.30.50]
ok: [192.168.30.60]
ok: [192.168.30.61]
ok: [192.168.30.10]
ok: [192.168.30.52]

TASK [prepare : 禁用系统 swap] **********************************************************************************************
changed: [192.168.30.10]
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.52]
changed: [192.168.30.51]
changed: [192.168.30.50]

TASK [prepare : 删除fstab swap 相关配置] **************************************************************************************
ok: [192.168.30.60]
ok: [192.168.30.61]
ok: [192.168.30.10]
ok: [192.168.30.50]
ok: [192.168.30.51]
ok: [192.168.30.52]

TASK [prepare : 加载内核模块] *************************************************************************************************
ok: [192.168.30.10] => (item=br_netfilter)
changed: [192.168.30.51] => (item=br_netfilter)
changed: [192.168.30.61] => (item=br_netfilter)
changed: [192.168.30.60] => (item=br_netfilter)
changed: [192.168.30.50] => (item=br_netfilter)
changed: [192.168.30.51] => (item=ip_vs)
changed: [192.168.30.61] => (item=ip_vs)
changed: [192.168.30.51] => (item=ip_vs_rr)
changed: [192.168.30.50] => (item=ip_vs)
changed: [192.168.30.60] => (item=ip_vs)
changed: [192.168.30.10] => (item=ip_vs)
changed: [192.168.30.61] => (item=ip_vs_rr)
changed: [192.168.30.51] => (item=ip_vs_wrr)
changed: [192.168.30.50] => (item=ip_vs_rr)
changed: [192.168.30.60] => (item=ip_vs_rr)
changed: [192.168.30.61] => (item=ip_vs_wrr)
changed: [192.168.30.51] => (item=ip_vs_sh)
changed: [192.168.30.10] => (item=ip_vs_rr)
changed: [192.168.30.50] => (item=ip_vs_wrr)
changed: [192.168.30.60] => (item=ip_vs_wrr)
changed: [192.168.30.61] => (item=ip_vs_sh)
changed: [192.168.30.51] => (item=nf_conntrack_ipv4)
changed: [192.168.30.60] => (item=ip_vs_sh)
changed: [192.168.30.50] => (item=ip_vs_sh)
changed: [192.168.30.61] => (item=nf_conntrack_ipv4)
changed: [192.168.30.10] => (item=ip_vs_wrr)
ok: [192.168.30.51] => (item=nf_conntrack)
changed: [192.168.30.60] => (item=nf_conntrack_ipv4)
ok: [192.168.30.61] => (item=nf_conntrack)
changed: [192.168.30.50] => (item=nf_conntrack_ipv4)
ok: [192.168.30.60] => (item=nf_conntrack)
ok: [192.168.30.50] => (item=nf_conntrack)
changed: [192.168.30.10] => (item=ip_vs_sh)
changed: [192.168.30.52] => (item=br_netfilter)
ok: [192.168.30.10] => (item=nf_conntrack_ipv4)
changed: [192.168.30.52] => (item=ip_vs)
changed: [192.168.30.52] => (item=ip_vs_rr)
ok: [192.168.30.10] => (item=nf_conntrack)
changed: [192.168.30.52] => (item=ip_vs_wrr)
changed: [192.168.30.52] => (item=ip_vs_sh)
changed: [192.168.30.52] => (item=nf_conntrack_ipv4)
ok: [192.168.30.52] => (item=nf_conntrack)

TASK [prepare : 启用systemd自动加载模块服务] **************************************************************************************
ok: [192.168.30.61]
ok: [192.168.30.51]
ok: [192.168.30.50]
ok: [192.168.30.60]
ok: [192.168.30.52]
ok: [192.168.30.10]

TASK [prepare : 增加内核模块开机加载配置] *******************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.50]
changed: [192.168.30.51]
changed: [192.168.30.52]
changed: [192.168.30.10]

TASK [prepare : 设置系统参数] *************************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.50]
changed: [192.168.30.51]
changed: [192.168.30.52]
changed: [192.168.30.10]

TASK [prepare : 生效系统参数] *************************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.10]
changed: [192.168.30.50]
changed: [192.168.30.51]
changed: [192.168.30.52]

TASK [prepare : 设置系统 ulimits] *******************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.50]
changed: [192.168.30.51]
changed: [192.168.30.52]
changed: [192.168.30.10]

TASK [prepare : prepare some dirs] **************************************************************************************
ok: [192.168.30.60] => (item=/usr/bin)
ok: [192.168.30.61] => (item=/usr/bin)
ok: [192.168.30.10] => (item=/usr/bin)
ok: [192.168.30.51] => (item=/usr/bin)
ok: [192.168.30.50] => (item=/usr/bin)
changed: [192.168.30.60] => (item=/etc/kubernetes/ssl)
changed: [192.168.30.61] => (item=/etc/kubernetes/ssl)
changed: [192.168.30.50] => (item=/etc/kubernetes/ssl)
changed: [192.168.30.51] => (item=/etc/kubernetes/ssl)
ok: [192.168.30.10] => (item=/etc/kubernetes/ssl)
ok: [192.168.30.52] => (item=/usr/bin)
changed: [192.168.30.52] => (item=/etc/kubernetes/ssl)

TASK [prepare : 分发证书工具 CFSSL] *******************************************************************************************
changed: [192.168.30.60] => (item=cfssl)
changed: [192.168.30.61] => (item=cfssl)
changed: [192.168.30.51] => (item=cfssl)
changed: [192.168.30.50] => (item=cfssl)
ok: [192.168.30.10] => (item=cfssl)
changed: [192.168.30.60] => (item=cfssl-certinfo)
changed: [192.168.30.61] => (item=cfssl-certinfo)
changed: [192.168.30.51] => (item=cfssl-certinfo)
changed: [192.168.30.50] => (item=cfssl-certinfo)
changed: [192.168.30.60] => (item=cfssljson)
changed: [192.168.30.51] => (item=cfssljson)
changed: [192.168.30.61] => (item=cfssljson)
changed: [192.168.30.50] => (item=cfssljson)
ok: [192.168.30.10] => (item=cfssl-certinfo)
changed: [192.168.30.52] => (item=cfssl)
ok: [192.168.30.10] => (item=cfssljson)
changed: [192.168.30.52] => (item=cfssl-certinfo)
changed: [192.168.30.52] => (item=cfssljson)

TASK [prepare : 设置本地 bin 目录权限] ******************************************************************************************
ok: [192.168.30.10]

TASK [prepare : 写入环境变量$PATH] ********************************************************************************************
changed: [192.168.30.60]
changed: [192.168.30.61]
changed: [192.168.30.50]
changed: [192.168.30.10]
changed: [192.168.30.51]
changed: [192.168.30.52]

PLAY [lb] ***************************************************************************************************************
skipping: no hosts matched

PLAY RECAP **************************************************************************************************************
192.168.30.10              : ok=38   changed=29   unreachable=0    failed=0    skipped=16   rescued=0    ignored=0   
192.168.30.50              : ok=17   changed=13   unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   
192.168.30.51              : ok=17   changed=13   unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   
192.168.30.52              : ok=17   changed=13   unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   
192.168.30.60              : ok=17   changed=13   unreachable=0    failed=0    skipped=14   rescued=0    ignored=0   
192.168.30.61              : ok=17   changed=13   unreachable=0    failed=0    skipped=14   rescued=0    ignored=0

2）部署etcd集群

部署之前先查看/etc/ansible/bin下的etcdctl的版本

[root@k8s-master1 ansible]# bin/etcdctl -v
etcdctl version: 3.3.10
API version: 2

k8s-1.13.5版本要求etcd版本为v3.2.24，etcd-v3.3.10太高会由于kube-cntroller-manager版本过低导致如下报错，以下日志是在部署完calico网络产生的报错

[root@k8s-master1 templates]# tail -30 /var/log/messages
……
Aug 20 22:45:24 k8s-master1 kube-apiserver: E0820 22:45:24.933021   25576 watcher.go:208] watch chan error: etcdserver: mvcc: required revision has been compacted
Aug 20 22:45:24 k8s-master1 kube-controller-manager: W0820 22:45:24.933345   25595 reflector.go:256] k8s.io/client-go/informers/factory.go:132: watch of *v1beta1.Event ended with: The resourceVersion for the provided watch is too old.
……

将etcd版本改为v3.2.24

github官网搜索etcd并点击进入

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
找到etcd-3.2.24这个版本

点击Assets资产下载etcd-v3.2.24-linux-amd64.tar.gz压缩文件

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

将下载的etcd压缩包解压放到/etc/ansible/bin目录下覆盖掉以前的etcd相关的二进制执行程序

[root@k8s-master1 etcd]# pwd
/data/etcd
[root@k8s-master1 etcd]# tar xvf  etcd-v3.2.24-linux-amd64.tar.gz 
[root@k8s-master1 etcd]# cp etcd-v3.2.24-linux-amd64/etcd*  /etc/ansible/bin/
[root@k8s-master1 ansible]# pwd
/etc/ansible
[root@k8s-master1 ansible]# bin/etcdctl -v  #执行命令检查etcd版本
etcdctl version: 3.2.24  #版本以更改
API version: 2

部署etcd集群

[root@k8s-master1 ansible]# ansible-playbook 02.etcd.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
ok: [192.168.30.51] => (item=/etc/kubernetes/ssl)
changed: [192.168.30.52] => (item=/etc/etcd/ssl)
changed: [192.168.30.50] => (item=/etc/etcd/ssl)
changed: [192.168.30.51] => (item=/etc/etcd/ssl)
changed: [192.168.30.52] => (item=/var/lib/etcd)
changed: [192.168.30.50] => (item=/var/lib/etcd)
changed: [192.168.30.51] => (item=/var/lib/etcd)

        TASK [etcd : 下载etcd二进制文件] ******************************************************
        changed: [192.168.30.51] => (item=etcd)
        changed: [192.168.30.50] => (item=etcd)
        changed: [192.168.30.52] => (item=etcd)
        changed: [192.168.30.50] => (item=etcdctl)
        changed: [192.168.30.52] => (item=etcdctl)
        changed: [192.168.30.51] => (item=etcdctl)

        TASK [etcd : 分发证书相关] ***********************************************************
        changed: [192.168.30.50 -> 192.168.30.10] => (item=ca.pem)
        changed: [192.168.30.52 -> 192.168.30.10] => (item=ca.pem)
        changed: [192.168.30.51 -> 192.168.30.10] => (item=ca.pem)
        changed: [192.168.30.52 -> 192.168.30.10] => (item=ca-key.pem)
        changed: [192.168.30.51 -> 192.168.30.10] => (item=ca-key.pem)
        changed: [192.168.30.50 -> 192.168.30.10] => (item=ca-key.pem)
        changed: [192.168.30.52 -> 192.168.30.10] => (item=ca.csr)
        changed: [192.168.30.50 -> 192.168.30.10] => (item=ca.csr)
        changed: [192.168.30.51 -> 192.168.30.10] => (item=ca.csr)
        changed: [192.168.30.52 -> 192.168.30.10] => (item=ca-config.json)
        changed: [192.168.30.50 -> 192.168.30.10] => (item=ca-config.json)
        changed: [192.168.30.51 -> 192.168.30.10] => (item=ca-config.json)

        TASK [etcd : 读取etcd证书stat信息] ***************************************************
        ok: [192.168.30.50]
        ok: [192.168.30.51]
        ok: [192.168.30.52]

        TASK [etcd : 创建etcd证书请求] *******************************************************
        changed: [192.168.30.50]
        changed: [192.168.30.51]
        changed: [192.168.30.52]

        TASK [etcd : 创建 etcd证书和私钥] *****************************************************
        changed: [192.168.30.52]
        changed: [192.168.30.51]
        changed: [192.168.30.50]

        TASK [etcd : 创建etcd的systemd unit文件] ********************************************
        changed: [192.168.30.50]
        changed: [192.168.30.51]
        changed: [192.168.30.52]

        TASK [etcd : 开机启用etcd服务] *******************************************************
        changed: [192.168.30.50]
        changed: [192.168.30.51]
        changed: [192.168.30.52]

        TASK [etcd : 开启etcd服务] *********************************************************
        changed: [192.168.30.52]
        changed: [192.168.30.51]
        changed: [192.168.30.50]

        TASK [etcd : 以轮询的方式等待服务同步完成] ***************************************************
        changed: [192.168.30.50]
        changed: [192.168.30.51]
        changed: [192.168.30.52]

        PLAY RECAP *********************************************************************
        192.168.30.50              : ok=11   changed=9    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   
        192.168.30.51              : ok=11   changed=9    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   
        192.168.30.52              : ok=11   changed=9    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

3）检查etcd以及健康性检测

分别查看各etcd服务是否启动

[root@k8s-etcd-1 ~]# systemctl status etcd
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

以及etcd集群的健康性检查

[root@k8s-etcd-1 ~]# export NODE_IPS="192.168.30.50 192.168.30.51 192.168.30.52"  #声明变量
[root@k8s-etcd-1 ~]# for ip in ${NODE_IPS};do ETCDCTL_API=3 /usr/bin/etcdctl --endpoints=https://${ip}:2379 --cacert=/etc/kubernetes/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem endpoint health;done
https://192.168.30.50:2379 is healthy: successfully committed proposal: took = 1.867785ms   #必须都看到 successfully健康成功检测信息
https://192.168.30.51:2379 is healthy: successfully committed proposal: took = 3.900401ms   #必须都看到 successfully健康成功检测信息
https://192.168.30.52:2379 is healthy: successfully committed proposal: took = 3.015816ms  #必须都看到 successfully健康成功检测信息

4）部署docker，因之前各master及各节点已安装docker则不用重新部署,跳过此步骤

[root@k8s-master1 ansible]# ansible-playbook 03.docker.yml

5）部署kube-master

[root@k8s-master1 ansible]# ansible-playbook 04.kube-master.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
TASK [kube-master : 分发证书相关] *****
ok: [192.168.30.10 -> 192.168.30.10] => (item=admin.pem)
ok: [192.168.30.10 -> 192.168.30.10] => (item=admin-key.pem)
ok: [192.168.30.10 -> 192.168.30.10] => (item=ca.pem)
ok: [192.168.30.10 -> 192.168.30.10] => (item=ca-key.pem)
ok: [192.168.30.10 -> 192.168.30.10] => (item=ca.csr)
ok: [192.168.30.10 -> 192.168.30.10] => (item=ca-config.json)

    TASK [kube-master : 创建 kubernetes 证书签名请求] *******************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : 创建 kubernetes 证书和私钥] ********************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-master : 创建 aggregator proxy证书签名请求] **************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : 创建 aggregator-proxy证书和私钥] ***************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-master : 创建 basic-auth.csv] **********************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : 创建kube-apiserver的systemd unit文件] ********************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : 创建kube-controller-manager的systemd unit文件] ***********************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : 创建kube-scheduler的systemd unit文件] ********************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-master : enable master 服务] ***********************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-master : 启动 master 服务] ***************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-master : 以轮询的方式等待master服务启动完成] *******************************************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [kube-node : 创建kube-node 相关目录] *************************************************************************************************************
    ok: [192.168.30.10] => (item=/var/lib/kubelet)
    ok: [192.168.30.10] => (item=/var/lib/kube-proxy)
    ok: [192.168.30.10] => (item=/etc/cni/net.d)
    ok: [192.168.30.10] => (item=/root/.kube)

    TASK [kube-node : 下载 kubelet,kube-proxy 二进制和基础 cni plugins] *************************************************************************************
    ok: [192.168.30.10] => (item=kubectl)
    ok: [192.168.30.10] => (item=kubelet)
    ok: [192.168.30.10] => (item=kube-proxy)
    ok: [192.168.30.10] => (item=bridge)
    ok: [192.168.30.10] => (item=host-local)
    ok: [192.168.30.10] => (item=loopback)

    TASK [kube-node : 分发 kubeconfig配置文件] ************************************************************************************************************
    ok: [192.168.30.10 -> 192.168.30.10]

    TASK [kube-node : 添加 kubectl 命令自动补全] ************************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-node : 分发证书相关] ***********************************************************************************************************************
    ok: [192.168.30.10 -> 192.168.30.10] => (item=ca.pem)
    ok: [192.168.30.10 -> 192.168.30.10] => (item=ca-key.pem)
    ok: [192.168.30.10 -> 192.168.30.10] => (item=ca.csr)
    ok: [192.168.30.10 -> 192.168.30.10] => (item=ca-config.json)

    TASK [kube-node : 准备kubelet 证书签名请求] *************************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-node : 创建 kubelet 证书与私钥] *************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 设置集群参数] ***********************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 设置客户端认证参数] ********************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 设置上下文参数] **********************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 选择默认上下文] **********************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 移动 kubelet.kubeconfig] ********************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 准备 cni配置文件] *******************************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-node : 创建kubelet的systemd unit文件] *****************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 开机启用kubelet 服务] ***************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 开启kubelet 服务] *****************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 安装kube-proxy.kubeconfig配置文件] **************************************************************************************************
    ok: [192.168.30.10 -> 192.168.30.10]

    TASK [kube-node : 创建kube-proxy 服务文件] ************************************************************************************************************
    ok: [192.168.30.10]

    TASK [kube-node : 开机启用kube-proxy 服务] ************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 开启kube-proxy 服务] **************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 轮询等待kubelet启动] ****************************************************************************************************************
    changed: [192.168.30.10]

    TASK [kube-node : 轮询等待node达到Ready状态] ************************************************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [kube-node : 设置node节点role] *****************************************************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [Making master nodes SchedulingDisabled] ***************************************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [Setting master role name] *****************************************************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    PLAY RECAP **************************************************************************************************************************************
    192.168.30.10              : ok=39   changed=21   unreachable=0    failed=0    skipped=1    rescued=0    ignored=0

6）在master端测试，是否能查看到主节点

[root@k8s-master1 ansible]# kubectl get nodes
NAME            STATUS                     ROLES    AGE   VERSION
192.168.30.10   Ready,SchedulingDisabled   master   86m   v1.13.5

7）在部署kube-node.yml之前先准备好镜像源下载地址，改为本地harbor镜像仓库下载，避免pause-amd64基础镜像无法下载到时k8s环境无法部署

[root@k8s-master1 ~]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/pause-amd64:3.1 #先在阿里云官网将镜像拉取下来
[root@k8s-master1 ~]# docker login www.harbor.com   #登录harbor服务
Username (admin): admin
Password: 
Login Succeeded
[root@k8s-master1 ~]# docker images  #查看拉取的镜像
REPOSITORY                                                      TAG                 IMAGE ID            CREATED             SIZE
docker.io/alpine                                                latest              b7b28af77ffe        5 weeks ago         5.58 MB
www.harbor.com/base-images/alpine                               v1                  b7b28af77ffe        5 weeks ago         5.58 MB 
docker.io/mirrorgooglecontainers/pause-amd64                    3.1                 da86e6ba6ca1        20 months ago       742 kB
[root@k8s-master1 ~]# [root@k8s-master1 ~]# docker tag docker.io/mirrorgooglecontainers/pause-amd64:3.1 www.harbor.com/base-images/mirrorgooglecontainers/pause-amd64:3.1 #打上tag号
[root@k8s-master1 ~]# docker push www.harbor.com/base-images/pause-amd64 #推送至harbor仓库

8）harbor仓库查看镜像已推送成功

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

9）修改kube-node默认的基础容器镜像下载地址，改为从本地harbor获取

[root@k8s-master1 defaults]# pwd
/etc/ansible/roles/kube-node/defaults

[root@k8s-master1 defaults]# vim main.yml
# 默认使用kube-proxy的 'iptables' 模式，可选 'ipvs' 模式(experimental)
PROXY_MODE: "iptables"  

# 基础容器镜像
SANDBOX_IMAGE: "www.harbor.com/base-images/pause-amd64:3.1"  #本地的harbor镜像地址
#SANDBOX_IMAGE: "registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Kubelet 根目录
KUBELET_ROOT_DIR: "/var/lib/kubelet"

# node节点最大pod 数
MAX_PODS: 110

10）部署kube-node

[root@k8s-master1 ansible]# ansible-playbook 05.kube-node.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
TASK [kube-node : 下载 kubelet,kube-proxy 二进制和基础 cni plugins] *****
ok: [192.168.30.61] => (item=kubectl)
ok: [192.168.30.60] => (item=kubectl)
ok: [192.168.30.61] => (item=kubelet)
ok: [192.168.30.60] => (item=kubelet)
ok: [192.168.30.61] => (item=kube-proxy)
ok: [192.168.30.60] => (item=kube-proxy)
ok: [192.168.30.61] => (item=bridge)
ok: [192.168.30.60] => (item=bridge)
ok: [192.168.30.61] => (item=host-local)
ok: [192.168.30.60] => (item=host-local)
ok: [192.168.30.61] => (item=loopback)
ok: [192.168.30.60] => (item=loopback)

                TASK [kube-node : 分发 kubeconfig配置文件] ************************************************************************************************************
                ok: [192.168.30.60 -> 192.168.30.10]
                ok: [192.168.30.61 -> 192.168.30.10]

                TASK [kube-node : 添加 kubectl 命令自动补全] ************************************************************************************************************
                ok: [192.168.30.60]
                ok: [192.168.30.61]

                TASK [kube-node : 分发证书相关] ***********************************************************************************************************************
                ok: [192.168.30.60 -> 192.168.30.10] => (item=ca.pem)
                ok: [192.168.30.61 -> 192.168.30.10] => (item=ca.pem)
                ok: [192.168.30.60 -> 192.168.30.10] => (item=ca-key.pem)
                ok: [192.168.30.61 -> 192.168.30.10] => (item=ca-key.pem)
                ok: [192.168.30.60 -> 192.168.30.10] => (item=ca.csr)
                ok: [192.168.30.61 -> 192.168.30.10] => (item=ca.csr)
                ok: [192.168.30.60 -> 192.168.30.10] => (item=ca-config.json)
                ok: [192.168.30.61 -> 192.168.30.10] => (item=ca-config.json)

                TASK [kube-node : 准备kubelet 证书签名请求] *************************************************************************************************************
                ok: [192.168.30.60]
                ok: [192.168.30.61]

                TASK [kube-node : 创建 kubelet 证书与私钥] *************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 设置集群参数] ***********************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 设置客户端认证参数] ********************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 设置上下文参数] **********************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 选择默认上下文] **********************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 移动 kubelet.kubeconfig] ********************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 准备 cni配置文件] *******************************************************************************************************************
                ok: [192.168.30.60]
                ok: [192.168.30.61]

                TASK [kube-node : 创建kubelet的systemd unit文件] *****************************************************************************************************
                ok: [192.168.30.60]
                ok: [192.168.30.61]

                TASK [kube-node : 开机启用kubelet 服务] ***************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 开启kubelet 服务] *****************************************************************************************************************
                changed: [192.168.30.61]
                changed: [192.168.30.60]

                TASK [kube-node : 安装kube-proxy.kubeconfig配置文件] **************************************************************************************************
                ok: [192.168.30.60 -> 192.168.30.10]
                ok: [192.168.30.61 -> 192.168.30.10]

                TASK [kube-node : 创建kube-proxy 服务文件] ************************************************************************************************************
                ok: [192.168.30.60]
                ok: [192.168.30.61]

                TASK [kube-node : 开机启用kube-proxy 服务] ************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 开启kube-proxy 服务] **************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 轮询等待kubelet启动] ****************************************************************************************************************
                changed: [192.168.30.60]
                changed: [192.168.30.61]

                TASK [kube-node : 轮询等待node达到Ready状态] ************************************************************************************************************
                changed: [192.168.30.60 -> 192.168.30.10]
                changed: [192.168.30.61 -> 192.168.30.10]

                TASK [kube-node : 设置node节点role] *****************************************************************************************************************
                changed: [192.168.30.61 -> 192.168.30.10]
                changed: [192.168.30.60 -> 192.168.30.10]

                PLAY RECAP **************************************************************************************************************************************
                192.168.30.60              : ok=24   changed=13   unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   
                192.168.30.61              : ok=24   changed=13   unreachable=0    failed=0    skipped=0    rescued=0    ignored=0

11）查看集群中的节点状态

[root@k8s-master1 ansible]# kubectl get nodes
NAME            STATUS                     ROLES    AGE     VERSION
192.168.30.10   Ready,SchedulingDisabled   master   4h29m   v1.13.5
192.168.30.60   Ready                      node     4h28m   v1.13.5
192.168.30.61   Ready                      node     4h28m   v1.13.5

12）在部署网络network前（以calico网络模式为例）先查看k8s支持的calico版本

在github官网中搜索kubernetes找到changlog-1.13.md

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

在点击额外以来（External Dependencies）

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

查看到K8s支持的calico版本为至少v3.3.1

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

13）github下载calico-v3.3.2,并将此压缩文件中包含的各镜像上传至本地harbor镜像仓库

点击项目calico

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

选择版本releases

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

找到calico-v3.3.2版本，下载release-v3.3.2.tgz

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

将下载的calico压缩文件解压

[root@k8s-master1 calico]# pwd
/data/calico
[root@k8s-master1 calico]# ll
total 95948
-rw-r--r-- 1 root root 98247376 Jul 10 18:44 release-v3.3.2.tgz

所包含的文件、二进制文件、镜像压缩文件

[root@k8s-master1 release-v3.3.2]# ll

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
[root@k8s-master1 release-v3.3.2]# ll images/

[root@k8s-master1 release-v3.3.2]# ll bin

将二进制文件复制到/etc/ansible/bin下，覆盖掉之前版本的calicoctl

[root@k8s-master1 release-v3.3.2]# cp bin/calicoctl /etc/ansible/bin
cp: overwrite ‘/etc/ansible/bin/calicoctl’? y

在验证当前的版本是否为3.3.2

[root@k8s-master1 release-v3.3.2]# /etc/ansible/bin/calicoctl  version

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

各calico镜像压缩文件先加载到本地，在上传至harbor

[root@k8s-master1 release-v3.3.2]# docker load -i images/calico-node.tar  #calico-node加载到本地
[root@k8s-master1 release-v3.3.2]# docker tag calico/node:v3.3.2 www.harbor.com/base-images/calico-node:v3.3.2 #打上tag号
[root@k8s-master1 release-v3.3.2]# docker push www.harbor.com/base-images/calico-node:v3.3.2  #上传calico-node镜像

[root@k8s-master1 release-v3.3.2]# docker load -i images/calico-cni.tar #calico-cni加载到本地
[root@k8s-master1 release-v3.3.2]# docker tag calico/cni:v3.3.2 www.harbor.com/base-images/calico-cni:v3.3.2 #打上tag号
[root@k8s-master1 release-v3.3.2]# docker push www.harbor.com/base-images/calico-cni:v3.3.2 #上传calico-cni镜像

[root@k8s-master1 release-v3.3.2]# docker load -i images/calico-kube-controllers.tar  #calico-kube-controllers加载到本地
[root@k8s-master1 release-v3.3.2]# docker tag calico/kube-controllers:v3.3.2 www.harbor.com/base-images/calico-kube-controllers:v3.3.2 #打上tag号
[root@k8s-master1 release-v3.3.2]# docker push www.harbor.com/base-images/calico-kube-controllers:v3.3.2 #上传calico-kube-controllers镜像

14）修改network的yml文件（这里以calico v3.3.2为例）

calico的版本号改为3.3.2

[root@k8s-master1 defaults]# pwd
/etc/ansible/roles/calico/defaults
[root@k8s-master1 defaults]# vim main.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

Calico-node镜像下载地址改为本地harbor

[root@k8s-master1 templates]# pwd
/etc/ansible/roles/calico/templates
[root@k8s-master1 templates]# vim calico-v3.3.yaml.j2

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

Calico-cni镜像下载地址改为本地harbor

[root@k8s-master1 templates]# vim calico-v3.3.yaml.j2

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

Calico-kube-controllers镜像下载地址改为本地harbor

[root@k8s-master1 templates]# vim calico-v3.3.yaml.j2

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

15）开始部署network（calico）

[root@k8s-master1 ansible]# ansible-playbook 06.network.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
TASK [calico : 创建calico 证书请求] **
ok: [192.168.30.10 -> 192.168.30.10]

    TASK [calico : 创建 calico证书和私钥] *****************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [calico : get calico-etcd-secrets info] ***************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [calico : 配置 calico DaemonSet yaml文件] *****************************************************************
    ok: [192.168.30.10 -> 192.168.30.10]

    TASK [calico : 检查是否已下载离线calico镜像] **************************************************************************
    changed: [192.168.30.10]

    TASK [calico : node 节点创建calico 相关目录] ***********************************************************************
    ok: [192.168.30.60] => (item=/etc/calico/ssl)
    ok: [192.168.30.10] => (item=/etc/calico/ssl)
    ok: [192.168.30.61] => (item=/etc/calico/ssl)
    ok: [192.168.30.10] => (item=/etc/cni/net.d)
    ok: [192.168.30.60] => (item=/etc/cni/net.d)
    ok: [192.168.30.60] => (item=/opt/kube/images)
    ok: [192.168.30.61] => (item=/etc/cni/net.d)
    ok: [192.168.30.10] => (item=/opt/kube/images)
    ok: [192.168.30.61] => (item=/opt/kube/images)

    TASK [calico : 获取calico离线镜像推送情况] ***************************************************************************
    changed: [192.168.30.60]
    changed: [192.168.30.10]
    changed: [192.168.30.61]

    TASK [calico : 运行 calico网络] ********************************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]

    TASK [calico : 删除默认cni配置] **********************************************************************************
    ok: [192.168.30.60]
    ok: [192.168.30.61]
    ok: [192.168.30.10]

    TASK [calico : 下载calicoctl 客户端] ****************************************************************************
    ok: [192.168.30.61] => (item=calicoctl)
    ok: [192.168.30.60] => (item=calicoctl)
    ok: [192.168.30.10] => (item=calicoctl)

    TASK [calico : 分发 calico 证书] *******************************************************************************
    ok: [192.168.30.10 -> 192.168.30.10] => (item=calico.pem)
    changed: [192.168.30.60 -> 192.168.30.10] => (item=calico.pem)
    changed: [192.168.30.61 -> 192.168.30.10] => (item=calico.pem)
    ok: [192.168.30.10 -> 192.168.30.10] => (item=calico-key.pem)
    changed: [192.168.30.61 -> 192.168.30.10] => (item=calico-key.pem)
    changed: [192.168.30.60 -> 192.168.30.10] => (item=calico-key.pem)

    TASK [calico : 准备 calicoctl配置文件] ***************************************************************************
    ok: [192.168.30.61]
    ok: [192.168.30.60]
    ok: [192.168.30.10]

    TASK [calico : 轮询等待calico-node 运行，视下载镜像速度而定] ***************************************************************
    changed: [192.168.30.10 -> 192.168.30.10]
    changed: [192.168.30.61 -> 192.168.30.10]
    changed: [192.168.30.60 -> 192.168.30.10]

    PLAY RECAP *************************************************************************************************
    192.168.30.10              : ok=15   changed=6    unreachable=0    failed=0    skipped=43   rescued=0    ignored=0   
    192.168.30.60              : ok=8    changed=3    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0   
    192.168.30.61              : ok=8    changed=3    unreachable=0    failed=0    skipped=25   rescued=0    ignored=0

16）node节点检查calico网络

检查calico版本是否为3.3.2

[root@k8s-node-1 ~]# calicoctl version
Client Version:    v3.3.2
Build date:        2018-12-03T15:10:51+0000
Git commit:        594fd84e
Cluster Version:   v3.3.2
Cluster Type:      k8s,bgp

自动在harbor拉取的calico的相关镜像

[root@k8s-node-1 ~]# docker images
REPOSITORY                               TAG                 IMAGE ID            CREATED             SIZE
www.harbor.com/base-images/calico-node   v3.3.2              4e9be81e3a59        8 months ago        75.3MB
www.harbor.com/base-images/calico-cni    v3.3.2              490d921fa49c        8 months ago        75.4MB
www.harbor.com/base-images/pause-amd64   3.1                 da86e6ba6ca1        20 months ago       742kB

calico的点对点的节点网络即自动添加的节点路由（显示的是主节点和另一个节点）

[root@k8s-node-1 ~]# calicoctl node status
Calico process is running.

IPv4 BGP status
+---------------+-------------------+-------+----------+-------------+
| PEER ADDRESS  |     PEER TYPE     | STATE |  SINCE   |    INFO     |
+---------------+-------------------+-------+----------+-------------+
| 192.168.30.10 | node-to-node mesh | up    | 22:25:47 | Established |
| 192.168.30.61 | node-to-node mesh | up    | 22:33:37 | Established |
+---------------+-------------------+-------+----------+-------------+

17）到此，基本的k8s集群环境已经部署完成

9.在集群环境中再添加master、node等节点

添加node节点

1）将k8s-node-3节点添加到集群中

[root@k8s-master1 ansible]# pwd
/etc/ansible
[root@k8s-master1 ansible]# vim hosts
……
[kube-node]
192.168.30.60
192.168.30.61

[new-node] # 预留组，后续添加node节点使用
192.168.30.62 #添加的新node节点
……

2）因之前各节点早已部署docker，再次部署肯能会导致集群部署故障，因此在20.addnode.yml注释掉或删除掉- docker

root@k8s-master1:/etc/ansible# vim 20.addnode.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

3）然后再ansible部署添加新节点

[root@k8s-master1 ansible]# ansible-playbook 20.addnode.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
……
PLAY [deploy] **

    TASK [Gathering Facts] *************************************************************************************
    ok: [192.168.30.10]

    TASK [rm new-node in ansible hosts] ************************************************************************
    changed: [192.168.30.10]

    PLAY RECAP *************************************************************************************************
    192.168.30.10              : ok=2    changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   
    192.168.30.62              : ok=70   changed=60   unreachable=0    failed=0    skipped=58   rescued=0    ignored=0

添加master节点

1）将k8s-master2节点添加到集群环境，修改ansible的hosts文件

[root@k8s-master1 ansible]# vim hosts
…..
[kube-master]
192.168.30.10

[new-master] # 预留组，后续添加master节点使用
192.168.30.11  #添加的新master节点
……

2）同样21.addmaster.yml注释掉或删除掉- docker

root@k8s-master1:/etc/ansible# vim 21.addmaster.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

3）开始部署添加新master节点

[root@k8s-master1 ansible]# ansible-playbook 21.addmaster.yml

ansible部署k8s多master、多node集群以及dashboard、dns、grafana
……
PLAY [deploy] ****

TASK [Gathering Facts] ***************************************************************************
ok: [192.168.30.10]

TASK [rm new-master in ansible hosts] ************************************************************
changed: [192.168.30.10]

PLAY RECAP ***************************************************************************************
192.168.30.10              : ok=2    changed=1    unreachable=0    failed=0    skipped=0    rescued=0    ignored=0   
192.168.30.11              : ok=89   changed=46   unreachable=0    failed=0    skipped=55   rescued=0    ignored=0

查看新添加的master、node节点

[root@k8s-master1 ~]# kubectl get nodes
NAME            STATUS                     ROLES    AGE   VERSION
92.168.30.10   Ready,SchedulingDisabled   master   56m   v1.13.5
192.168.30.11   Ready,SchedulingDisabled   master   19m   v1.13.5  #新添加的master节点
192.168.30.60   Ready                      node     52m   v1.13.5
192.168.30.61   Ready                      node     52m   v1.13.5
192.168.30.62   Ready                      node     30m   v1.13.5   #新添加的node节点

10.在k8s-master1端创建pod容器进行测试

1）创建pod容器

[root@k8s-master1 ~]# kubectl run test-pod --image=alpine --replicas=4 sleep 360000
kubectl run --generator=deployment/apps.v1 is DEPRECATED and will be removed in a future version. Use kubectl run --generator=run-pod/v1 or kubectl create instead.

2）查看pod容器的运行状态

[root@k8s-master1 ~]# kubectl get pod -o wide
NAME                                      READY        STATUS    RESTARTS   AGE   IP              NODE            NOMINATED NODE   READINESS GATES
test-pod-9569f557-kq54m   1/1           Running   0          2m    172.20.76.158   192.168.30.62   <none>           <none>
test-pod-9569f557-sh4pp   1/1           Running   0          2m    172.20.140.82   192.168.30.61   <none>           <none>
test-pod-9569f557-sqr77   1/1           Running   0          2m    172.20.109.81   192.168.30.60   <none>           <none>
test-pod-9569f557-wlmgf   1/1          Running   0          2m    172.20.76.159   192.168.30.62   <none>           <none>

3）进入一个pod容器，测试夸节点两个pod之间的通信，是否能ping通

[root@k8s-master1 ~]# kubectl exec -it test-pod-9569f557-kq54m sh
/ #

4）查看此容器的ip

/ # ifconfig
eth0      Link encap:Ethernet  HWaddr 36:25:BB:AD:A1:A3  
                    inet addr:172.20.76.158  Bcast:0.0.0.0  Mask:255.255.255.255  #当前pod的ip
……
5）在此容器ping另外两个node节点中的pod进行测试,可以ping通，实现跨节点间的pod容器通信
/ # ping 172.20.140.82
PING 172.20.140.82 (172.20.140.82): 56 data bytes
64 bytes from 172.20.140.82: seq=0 ttl=62 time=0.509 ms
64 bytes from 172.20.140.82: seq=1 ttl=62 time=0.614 ms
64 bytes from 172.20.140.82: seq=2 ttl=62 time=0.386 ms
……
/ # ping 172.20.109.81
PING 172.20.109.81 (172.20.109.81): 56 data bytes
64 bytes from 172.20.109.81: seq=0 ttl=62 time=0.584 ms
64 bytes from 172.20.109.81: seq=1 ttl=62 time=0.678 ms
64 bytes from 172.20.109.81: seq=2 ttl=62 time=0.704 ms

11.部署dashboard

1）dashboard目录下创建1.10.1版本的目录

[root@k8s-master1 dashboard]# mkdir 1.10.1
[root@k8s-master1 dashboard]# cd 1.10.1
[root@k8s-master1 1.10.1]# pwd
/etc/ansible/manifests/dashboard/1.10.1

2）复制dashboard安装相关的yml文件到此目录下

[root@k8s-master1 1.10.1]# cp ../*.yaml ./
[root@k8s-master1 1.10.1]# ll
total 24
-rw-r--r-- 1 root root  357 Aug 21 11:13 admin-user-sa-rbac.yaml
-rw-r--r-- 1 root root 4761 Aug 21 11:13 kubernetes-dashboard.yaml
-rw-r--r-- 1 root root 2223 Aug 21 11:13 read-user-sa-rbac.yaml
-rw-r--r-- 1 root root  458 Aug 21 11:13 ui-admin-rbac.yaml
-rw-r--r-- 1 root root  477 Aug 21 11:13 ui-read-rbac.yaml

3）github中查看dashboard-v1.10.1版本的信息

https://github.com/kubernetes/dashboard/releases/tag/v1.10.1
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

4）浏览器打开以上指定的部署dashboard的yml模板文件，可以看到指定下载镜像的官网地址，此地址下载慢，换为阿里云

https://raw.githubusercontent.com/kubernetes/dashboard/v1.10.1/src/deploy/recommended/kubernetes-dashboard.yaml
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

5）从阿里云下载dashboard镜像

[root@k8s-master1 1.10.1]# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/kubernetes-dashboard-amd64:v1.10.1
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

6）查看镜像，已经拉取下来

[root@k8s-master1 1.10.1]# docker images
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

7）将拉取的dashboard镜像打上tag号，推送至本地harbor镜像仓库

[root@k8s-master1 1.10.1]# docker tag f9aed6605b81 www.harbor.com/base-images/kubernetes-dashboard-amd64:v1.10.1
docker push www.harbor.com/base-images/kubernetes-dashboard-amd64:v1.10.1 #推送至本地harbor仓库
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

8）本地harbor仓库查看dashboard镜像

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

9）修改安装dashboard的yml配置文件，将其镜像拉取的地址改为本地harbor仓库

[root@k8s-master1 1.10.1]# vim kubernetes-dashboard.yaml
……
containers:
            - name: kubernetes-dashboard
                #image: k8s.gcr.io/kubernetes-dashboard-amd64:v1.8.3
                image: www.harbor.com/base-images/kubernetes-dashboard-amd64:v1.10.1
                ports:
                - containerPort: 8443
                    protocol: TCP
……

10）根据此目录下的所有yml文件，开始安装dashboard

[root@k8s-master1 1.10.1]# kubectl create -f ./
serviceaccount/admin-user created
clusterrolebinding.rbac.authorization.k8s.io/admin-user created
secret/kubernetes-dashboard-certs created
serviceaccount/kubernetes-dashboard created
role.rbac.authorization.k8s.io/kubernetes-dashboard-minimal created
rolebinding.rbac.authorization.k8s.io/kubernetes-dashboard-minimal created
deployment.apps/kubernetes-dashboard created
service/kubernetes-dashboard created
serviceaccount/dashboard-read-user created
clusterrolebinding.rbac.authorization.k8s.io/dashboard-read-binding created
clusterrole.rbac.authorization.k8s.io/dashboard-read-clusterrole created
clusterrole.rbac.authorization.k8s.io/ui-admin created
rolebinding.rbac.authorization.k8s.io/ui-admin-binding created
clusterrole.rbac.authorization.k8s.io/ui-read created
rolebinding.rbac.authorization.k8s.io/ui-read-binding created

11）指定kube-system命名空间，查看dashboard的运行状态

[root@k8s-master1 1.10.1]# kubectl get pod -n kube-system
NAME                                      READY   STATUS    RESTARTS   AGE
calico-kube-controllers-854875cc8-bvvsv   1/1     Running   0          10m
calico-node-2cb59                         2/2     Running   0          10m
calico-node-2ptr5                         2/2     Running   0          10m
calico-node-7fh5s                         2/2     Running   0          10m
calico-node-cxzxp                         2/2     Running   0          10m
calico-node-fc8z8                         2/2     Running   0          10m
kubernetes-dashboard-fbfff599f-gfrgd      1/1     Running   0          26s  #kubernetes-dashboard容器已经运行

12）登录dashboard账号和密码在/etc/ansible/hosts 文件中

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

13）查看dashborad在集群中的访问地址信息

root@k8s-master1:/etc/ansible# kubectl cluster-info
Kubernetes master is running at https://192.168.30.24:6443
kubernetes-dashboard is running at https://192.168.30.24:6443/api/v1/namespaces/kube-system/services/https:kubernetes-dashboard:/proxy
root@k8s-master1:/etc/ansible# kubectl cluster-info

14）输入以上url，登录dashboard（第一次访问时，账户和密码需要输入三次才可登录进去）

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

15）选择令牌并输入，其中kubeconfig是基于令牌实现的，需要的命令行去获取令牌

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

16）先找出admin-user

oot@k8s-master1:/etc/ansible# kubectl get secret -n kube-system | grep admin-user
admin-user-token-6qcq8                kubernetes.io/service-account-token   3      47m

17）在找出此用户的令牌

root@k8s-master1:/etc/ansible# kubectl get secret -n kube-system | grep admin-user
……
ca.crt:     1346 bytes
namespace:  11 bytes
token:      eyJhbGciOiJSUzI1NiIsImtpZCI6IiJ9.eyJpc3MiOiJrdWJlcm5ldGVzL3NlcnZpY2VhY2NvdW50Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9uYW1lc3BhY2UiOiJrdWJlLXN5c3RlbSIsImt1YmVybmV0ZXMuaW8vc2VydmljZWFjY291bnQvc2VjcmV0Lm5hbWUiOiJhZG1pbi11c2VyLXRva2VuLTZxY3E4Iiwia3ViZXJuZXRlcy5pby9zZXJ2aWNlYWNjb3VudC9zZXJ2aWNlLWFjY291bnQubmFtZSI6ImFkbWluLXVzZXIiLCJrdWJlcm5ldGVzLmlvL3NlcnZpY2VhY2NvdW50L3NlcnZpY2UtYWNjb3VudC51aWQiOiJkNzkzODViZS1jNjI2LTExZTktOTNkZC0wMDBjMjkyMDFkYzciLCJzdWIiOiJzeXN0ZW06c2VydmljZWFjY291bnQ6a3ViZS1zeXN0ZW06YWRtaW4tdXNlciJ9.F7-fD5vNoQtXA22R6dIPFww9LPQpfBBkMqJMys6mnCcjDyqCoy3kcO9gIwm94aNkhOX7ZSABzbfTmk7RKo67I08NtbzpGNUPKWDqAz1uBkOk7grbjfqwl7SUpbu7PhuNvQbsE7MTnX1tsjSjWxwb_6lALwiiPIRArIY_kMVVStD2lGknK5je1mxw2A-GzgtXTB6BMIuKZ3EbjGcpeIIEOmItrsyfG0pOBpyo8qkJmzVPM9IfEKP8ZoEajANgYmzfgMu9fD5nidjz3MKg9tlhdWeIC_YgLlN9jVJRuA7RdDu6qanRlpUC-XGIMGyWdQxjBh0xDi4jtdgSHplziYJYUA

18）复制以上令牌，成功登录k8s的web管理页面（当重新创建此用户是，此令牌会重新生成）

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

19）显示所有的命名空间namespace

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

20）查看当前集群所有节点

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

21) 还可以通过kubeconfig文件免令牌登录k8s仪表盘

将token添加至配置文件，注意token前面严格4个空格的缩进

root@k8s-master1:~# vim /etc/kubernetes/kubelet.kubeconfig

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

再将此认证文件传到windows桌面

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

浏览器访问选择kubeconfig认证方式，再点击choose kubeconfig file来选择一个kubeconfig文件

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

在windows桌面上找到kubeconfig文件，再点击打开

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

成功进入k8s仪表盘界面

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

12.部署kube-dns

1）/etc/ansible/manifests目录下默认是没有DNS服务目录，手动创建dns相关的目录

root@k8s-master1:/etc/ansible/manifests# mkdir DNS/{kube-dns,core-dns} -p
root@k8s-master1:/etc/ansible/manifests/DNS# ls
core-dns  kube-dns

2）这里只示范部署kube-dns，进入到此目录下

oot@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# pwd
/etc/ansible/manifests/DNS/kube-dns

3）在github上找k8s-v1.13.5这个版本，将kubernetes.tar.g压缩文件下载下来，次压缩包里面包含有dns的yaml安装配置文件

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

4）解压此包并进入解压后的目录kubernetes

root@k8s-master1:/data/src# tar xvf kubernetes.tar.gz
root@k8s-master1:/data/src# ls
kubernetes  kubernetes.tar.gz

5）找到kube-dns的yaml文件，可以看到此文件名为kube-dns.yaml.base

root@k8s-master1:/data/src/kubernetes/cluster/addons/dns/kube-dns# pwd
/data/src/kubernetes/cluster/addons/dns/kube-dns
root@k8s-master1:/data/src/kubernetes/cluster/addons/dns/kube-dns# ll
total 40
drwxr-xr-x 2 root root  167 Mar 25 16:06 ./
drwxr-xr-x 5 root root   71 Mar 25 16:06 ../
-rw-r--r-- 1 root root 6284 Mar 25 16:06 kube-dns.yaml.base
-rw-r--r-- 1 root root 6362 Mar 25 16:06 kube-dns.yaml.in
-rw-r--r-- 1 root root 6290 Mar 25 16:06 kube-dns.yaml.sed
-rw-r--r-- 1 root root 1077 Mar 25 16:06 Makefile
-rw-r--r-- 1 root root 1954 Mar 25 16:06 README.md
-rw-r--r-- 1 root root  308 Mar 25 16:06 transforms2salt.sed
-rw-r--r-- 1 root root  266 Mar 25 16:06 transforms2sed.sed

6）将此文件复制到专门创建kube-dns的目录下

root@k8s-master1:/data/src/kubernetes/cluster/addons/dns/kube-dns# cp kube-dns.yaml.base /etc/ansible/manifests/DNS/kube-dns/

7）进入到创建kube-dns目录，下载kube-dns相关的3各镜像并上传至本地harbor

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# ls
kube-dns.yaml.base

k8s-dns-kube-dns镜像（提供域名解析功能）

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/k8s-dns-kube-dns-amd64:1.14.13  #拉取k8s-dns-kube-dns镜像
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker tag 55a3c5209c5e www.harbor.com/base-images/k8s-dns-kube-dns-amd64:v1.14.13  #打上tag号
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker push www.harbor.com/base-images/k8s-dns-kube-dns-amd64:v1.14.13 #上传至harbor仓库

k8s-dns-dnsmasq-nanny镜像（DNS的缓存，减轻kube-dns的负载压力）

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/k8s-dns-dnsmasq-nanny-amd64:1.14.13 #拉取k8s-dns-dnsmasq-nanny镜像
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker tag 6dc8ef8287d3 www.harbor.com/base-images/k8s-dns-dnsmasq-nanny-amd64:v1.14.13 #打上tag号
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker push www.harbor.com/base-images/k8s-dns-dnsmasq-nanny-amd64:v1.14.13 #上传至harbor仓库

k8s-dns-sidecar镜像（检查以上两个镜像的将康状态）

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/k8s-dns-sidecar-amd64:1.14.13 #拉取k8s-dns-sidecar镜像
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker tag 4b2e93f0133d www.harbor.com/base-images/k8s-dns-sidecar-amd64:v1.14.13 #打上tag号
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker push www.harbor.com/base-images/k8s-dns-sidecar-amd64:v1.14.13 #上传至harbor仓库

8）在修改kube-dns.yaml配置文件

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# vim kube-dns.yaml
……
containers:
            - name: kubedns
                image: www.harbor.com/base-images/k8s-dns-kube-dns-amd64:v1.14.13
                resources:
……
# TODO: Set memory limits when we've profiled the container for large
                    # clusters, then set request = limit to keep this container in
                    # guaranteed class. Currently, this container falls into the
                    # "burstable" category so the kubelet doesn't backoff from restarting it.
                    limits:
                        memory: 4Gi
                    requests:
                        cpu: 2
                        memory: 2Gi

……

args:
                - --domain=jie.local.    #服务域名后缀
                - --dns-port=10053
                - --config-dir=/kube-dns-config
                - --v=2
                env:
                - name: PROMETHEUS_PORT
                    value: "10055"

……

- name: dnsmasq
                image: www.harbor.com/base-images/k8s-dns-dnsmasq-nanny-amd64:v1.14.13
                livenessProbe:
……
 args:
                - -v=2
                - -logtostderr
                - -configDir=/etc/k8s/dns/dnsmasq-nanny
                - -restartDnsmasq=true
                - --
                - -k
                - --cache-size=1000
                - --no-negcache
                - --dns-loop-detect
                - --log-facility=-
                - --server=/jie.local/127.0.0.1#10053
                - --server=/in-addr.arpa/127.0.0.1#10053
                - --server=/ip6.arpa/127.0.0.1#10053

……

 - name: sidecar
                image:  www.harbor.com/base-images/k8s-dns-sidecar-amd64:v1.14.13
                livenessProbe:
……

args:
                - --v=2
                - --logtostderr
                - --probe=kubedns,127.0.0.1:10053,kubernetes.default.svc.jie.local,5,SRV
                - --probe=dnsmasq,127.0.0.1:53,kubernetes.default.svc.jie.local,5,SRV

……

9）创建kube-dns服务

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# kubectl create -f kube-dns.yaml 
service/kube-dns created
serviceaccount/kube-dns created
configmap/kube-dns created
deployment.extensions/kube-dns created

10）查看kube-dns的3个容器已启动

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# kubectl get pod -n kube-system
NAME                                      READY   STATUS    RESTARTS   AGE
calico-kube-controllers-854875cc8-bvvsv   1/1     Running   1          10h
calico-node-2cb59                         1/2     Running   2          10h
calico-node-2ptr5                         1/2     Running   2          10h
calico-node-7fh5s                         1/2     Running   2          10h
calico-node-cxzxp                         2/2     Running   0          10h
calico-node-fc8z8                         1/2     Running   2          10h
kube-dns-69dcdbc668-xbfws                 3/3     Running   0          69s  #kube-dns服务一个pod中包含三个服务
kubernetes-dashboard-fbfff599f-gfrgd      1/1     Running   1          10h

11 ）准备拉取busybox镜像和安装yaml文件

准备busybox.yaml文件

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# ls
busybox.yaml  kube-dns.yaml

拉取镜像

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker pull busybox
root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# docker tag db8ee88ad75f www.harbor.com/base-images/docker:latest

创建busybox容器

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# kubectl create -f busybox.yaml
pod/busybox created

查看启动状态

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# kubectl get pod 
NAME                     READY   STATUS    RESTARTS   AGE
busybox                  1/1     Running   0          24m

12）busybox测试kube-dns，是否能够解析dns，如下所示解析成功

root@k8s-master1:/etc/ansible/manifests/DNS/kube-dns# kubectl exec busybox nslookup kubernetes
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

13.部署heapster

1)切换换到/etc/ansible/manifests/heapster目录下，此目录下默认有heapster的安装yaml文件

root@k8s-master1:/etc/ansible/manifests/heapster# ls
grafana.yaml  heapster.yaml  influxdb-v1.1.1  influxdb-with-pv  influxdb.yaml

2）拉取heapster相关的3个镜像服务并上传至本地haobor镜像仓库

heapster-grafana镜像（web图形展示）

root@k8s-master1:/etc/ansible/manifests/heapster# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/heapster-grafana-amd64:v4.4.3 #拉取heapster-grafana镜像
root@k8s-master1:/etc/ansible/manifests/heapster# docker tag 8cb3de219af7 www.harbor.com/base-images/heapster-grafana-amd64:v4.4.3 #将此镜像打上tag号，便于ban蹦区分
root@k8s-master1:/etc/ansible/manifests/heapster# docker push  www.harbor.com/base-images/heapster-grafana-amd64:v4.4.3  #将此镜像推送至本地仓库

heapster镜像（数据的采集）

root@k8s-master1:/etc/ansible/manifests/heapster# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/heapster-amd64:v1.5.4 #拉取heapster镜像 
root@k8s-master1:/etc/ansible/manifests/heapster# docker tag 72d68eecf40c www.harbor.com/base-images/heapster-amd64:v1.5.4  #将此镜像打上tag号，便于ban蹦区分
root@k8s-master1:/etc/ansible/manifests/heapster# docker push www.harbor.com/base-images/heapster-amd64:v1.5.4 #将此镜像推送至本地仓库

heapster-influxdbr镜像（数据的存储）

root@k8s-master1:/etc/ansible/manifests/heapster# docker pull registry.cn-hangzhou.aliyuncs.com/google_containers/heapster-influxdb-amd64:v1.3.3 #拉取pster-influxdb镜像
root@k8s-master1:/etc/ansible/manifests/heapster# docker tag 577260d221db www.harbor.com/base-images/heapster-influxdb-amd64:v1.3.3 #将此镜像打上tag号，便于ban蹦区分
root@k8s-master1:/etc/ansible/manifests/heapster# docker push www.harbor.com/base-images/heapster-influxdb-amd64:v1.3.3 #将此镜像推送至本地仓库

3）修改heapster的三个yaml文件中的镜像拉取的地址

root@k8s-master1:/etc/ansible/manifests/heapster# cat grafana.yaml  heapster.yaml   influxdb.yaml
……
spec:
            containers:
            - name: grafana
                #image: gcr.io/google_containers/heapster-grafana-amd64:v4.2.0
                image: www.harbor.com/base-images/heapster-grafana-amd64:v4.4.3
                ports:
                - containerPort: 3000
                    protocol: TCP
……

……
containers:
            - name: heapster
                #image: gcr.io/google_containers/heapster-amd64:v1.5.4
                image: www.harbor.com/base-images/heapster-amd64:v1.5.4
                imagePullPolicy: IfNotPresent
                command:
……

containers:
            - name: influxdb
                #image: gcr.io/google_containers/heapster-influxdb-amd64:v1.3.3
                image: www.harbor.com/base-images/heapster-influxdb-amd64:v1.3.3
                volumeMounts:
                - mountPath: /data
                    name: influxdb-storage
……

4）开始创建heapster服务

root@k8s-master1:/etc/ansible/manifests/heapster# kubectl apply -f .

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

5）查看服务是否启动，可以看到heapster的3个pod服务都已正常启动

root@k8s-master1:/etc/ansible/manifests/heapster# kubectl get pod -n kube-system

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

6）查看heapster中的grafana服务在集群中的访问地址以及其运行状态

root@k8s-master1:/etc/ansible/manifests/heapster# kubectl cluster-info
ansible部署k8s多master、多node集群以及dashboard、dns、grafana

7）输入以上grafana的url访问地址并输入账号登录器web图形界面

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

8）成功登录grafana主界面

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

9）显示集群中的cup利用以及各节点cpu利用等图形

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

10）也可以查看容器pod的cup、内存等使用图形描述

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

11）再返回dashboard的web界面，此时显示cpu使用率图形

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

12）以及容器组内存字节图形条目显示

ansible部署k8s多master、多node集群以及dashboard、dns、grafana

K8S/Kubernetes

K8S/Kubernetes社区为您提供最前沿的新闻资讯和知识内容

更多推荐

【深度】阿里巴巴万级规模 K8s 集群全局高可用体系之美

作者 | 韩堂、柘远、沉醉来源 | 阿里巴巴云原生公众号前言台湾作家林清玄在接受记者采访的时候，如此评价自己 30 多年写作生涯：“第一个十年我才华横溢，‘贼光闪现’，令周边黯然失色；第二个十年，我终于‘宝光现形’，不再去抢风头，反而与身边的美丽相得益彰；进入第三个十年，繁华落尽见真醇，我进入了‘醇光初现’的阶段，真正体味到了境界之美”。长夜有穷，真水无香。领略过了 K8s“身在江

K8S/Kubernetes

如何基于 K8s 构建下一代 DevOps 平台？

作者 | 孙健波（天元）导读：当前云原生 DevOps 体系现状如何？面临哪些挑战？如何通过 OAM 解决云原生 DevOps 场景下的诸多问题？云原生开发应用模型 OAM(Open Application Model) 社区核心成员孙健波将为大家一一解答，并分享如何基于 OAM 和 Kubernetes 打造无限能力的下一代 DevOps 平台。什么是 DevOps？为什么基于 Kub