Boost在linux和其他系统上的使用
1 Get BoostThe most reliable way to get a copy of Boost is to download a distribution from SourceForge:Download boost_1_35_0.tar.bz2.In the directory where you wa
1 Get Boost
The most reliable way to get a copy of Boost is to download a distribution from SourceForge:
-
Download boost_1_35_0.tar.bz2.
-
In the directory where you want to put the Boost installation, execute
tar --bzip2 -xf /path/to/boost_1_35_0.tar.bz2
Other Packages
RedHat, Debian, and other distribution packagers supply Boost library packages, however you may need to adapt these instructions if you use third-party packages, because their creators usually choose to break Boost up into several packages, reorganize the directory structure of the Boost distribution, and/or rename the library binaries.1 If you have any trouble, we suggest using an official Boost distribution from SourceForge.
2 The Boost Distribution
This is a sketch of the resulting directory structure:
boost_1_35_0/ .................The “boost root directory”
index.htm .........A copy of www.boost.org starts here
boost/ .........................All Boost Header files
libs/ ............Tests, .cpps, docs, etc., by library
index.html ........Library documentation starts here
algorithm/
any/
array/
…more libraries…
status/ .........................Boost-wide test suite
tools/ ...........Utilities, e.g. bjam, quickbook, bcp
more/ ..........................Policy documents, etc.
doc/ ...............A subset of all Boost library docs
It's important to note the following:
-
The path to the boost root directory (often /usr/local/boost_1_35_0) is sometimes referred to as $BOOST_ROOT in documentation and mailing lists .
-
To compile anything in Boost, you need a directory containing the boost/ subdirectory in your #include path.
-
Since all of Boost's header files have the .hpp extension, and live in the boost/ subdirectory of the boost root, your Boost #include directives will look like:
#include <boost/whatever.hpp>
or
#include "boost/whatever.hpp"
depending on your preference regarding the use of angle bracket includes.
-
Don't be distracted by the doc/ subdirectory; it only contains a subset of the Boost documentation. Start with libs/index.html if you're looking for the whole enchilada.
3 Header-Only Libraries
The first thing many people want to know is, “how do I build Boost?” The good news is that often, there's nothing to build.
Nothing to Build?
Most Boost libraries are header-only: they consist entirely of header files containing templates and inline functions, and require no separately-compiled library binaries or special treatment when linking.
The only Boost libraries that must be built separately are:
- Boost.Filesystem
- Boost.IOStreams
- Boost.ProgramOptions
- Boost.Python (see the Boost.Python build documentation before building and installing it)
- Boost.Regex
- Boost.Serialization
- Boost.Signals
- Boost.Thread
- Boost.Wave
A few libraries have optional separately-compiled binaries:
- Boost.DateTime has a binary component that is only needed if you're using its to_string/from_string or serialization features, or if you're targeting Visual C++ 6.x or Borland.
- Boost.Graph also has a binary component that is only needed if you intend to parse GraphViz files.
- Boost.Test can be used in “header-only” or “separately compiled” mode, although separate compilation is recommended for serious use.
4 Build a Simple Program Using Boost
To keep things simple, let's start by using a header-only library. The following program reads a sequence of integers from standard input, uses Boost.Lambda to multiply each number by three, and writes them to standard output:
#include <boost/lambda/lambda.hpp>
#include <iostream>
#include <iterator>
#include <algorithm>
int main()
{
using namespace boost::lambda;
typedef std::istream_iterator<int> in;
std::for_each(
in(std::cin), in(), std::cout << (_1 * 3) << " " );
}
Copy the text of this program into a file called example.cpp.
Now, in the directory where you saved example.cpp, issue the following command:
c++ -I path/to/boost_1_35_0 example.cpp -o example
To test the result, type:
echo 1 2 3 | ./example
4.1 Errors and Warnings
Don't be alarmed if you see compiler warnings originating in Boost headers. We try to eliminate them, but doing so isn't always practical.3 Errors are another matter. If you're seeing compilation errors at this point in the tutorial, check to be sure you've copied the example program correctly and that you've correctly identified the Boost root directory.
5 Prepare to Use a Boost Library Binary
If you want to use any of the separately-compiled Boost libraries, you'll need to acquire library binaries.
5.1 Easy Build and Install
Issue the following commands in the shell (don't type $; that represents the shell's prompt):
$ cd path/to/boost_1_35_0
$ ./configure --help
Select your configuration options and invoke ./configure again without the --help option. Unless you have write permission in your system's /usr/local/ directory, you'll probably want to at least use
$ ./configure --prefix=path/to/installation/prefix
to install somewhere else. Also, consider using the --show-libraries and --with-libraries= options to limit the long wait you'll experience if you build everything. Finally,
$ make install
will leave Boost binaries in the lib/ subdirectory of your installation prefix. You will also find a copy of the Boost headers in the include/ subdirectory of the installation prefix, so you can henceforth use that directory as an #include path in place of the Boost root directory.
5.2 Or, Build Custom Binaries
If you're using a compiler other than your system's default, you'll need to use Boost.Build to create binaries. You'll also use this method if you need a nonstandard build variant (see the Boost.Build documentation for more details).
Boost.Build is a text-based system for developing, testing, and installing software. To use it, you'll need an executable called bjam.
5.2.1 Get bjam
bjam is the command-line tool that drives the Boost Build system. To build Boost binaries, you'll invoke bjam from the Boost root.
Boost provides pre-compiled bjam executables for a variety of platforms. Alternatively, you can build bjam yourself using these instructions.
5.2.2 Identify Your Toolset
First, find the toolset corresponding to your compiler in the following table.
Note
If you previously chose a toolset for the purposes of building bjam, you should assume it won't work and instead choose newly from the table below.
| Toolset Name | Vendor | Notes |
|---|---|---|
| acc | Hewlett Packard | Only very recent versions are known to work well with Boost |
| borland | Borland | |
| como | Comeau Computing | Using this toolset may require configuring another toolset to act as its backend |
| cw | Metrowerks/FreeScale | The CodeWarrior compiler. We have not tested versions of this compiler produced since it was sold to FreeScale. |
| dmc | Digital Mars | As of this Boost release, no version of dmc is known to handle Boost well. |
| darwin | Apple Computer | Apple's version of the GCC toolchain with support for Darwin and MacOS X features such as frameworks. |
| gcc | The Gnu Project | Includes support for Cygwin and MinGW compilers. |
| hp_cxx | Hewlett Packard | Targeted at the Tru64 operating system. |
| intel | Intel | |
| kylix | Borland | |
| msvc | Microsoft | |
| qcc | QNX Software Systems | |
| sun | Sun | Only very recent versions are known to work well with Boost. |
| vacpp | IBM | The VisualAge C++ compiler. |
If you have multiple versions of a particular compiler installed, you can append the version number to the toolset name, preceded by a hyphen, e.g. intel-9.0 or borland-5.4.3.
5.2.3 Select a Build Directory
Boost.Build will place all intermediate files it generates while building into the build directory. If your Boost root directory is writable, this step isn't strictly necessary: by default Boost.Build will create a bin.v2/ subdirectory for that purpose in your current working directory.
5.2.4 Invoke bjam
Change your current directory to the Boost root directory and invoke bjam as follows:
bjam --build-dir=build-directory --toolset=toolset-name stage
For example, your session might look like this:
$ cd ~/boost_1_35_0
$ bjam --build-dir=/tmp/build-boost --toolset=gcc stage
Building the special stage target places Boost library binaries in the stage/ subdirectory of your build directory.
Note
bjam is case-sensitive; it is important that all the parts shown in bold type above be entirely lower-case.
For a description of other options you can pass when invoking bjam, type:
bjam --help
In particular, to limit the amount of time spent building, you may be interested in:
- reviewing the list of library names with --show-libraries
- limiting which libraries get built with the --with-library-name or --without-library-name options
- choosing a specific build variant by adding release or debug to the command line.
5.3 Expected Build Output
During the process of building Boost libraries, you can expect to see some messages printed on the console. These may include
-
Notices about Boost library configuration—for example, the Regex library outputs a message about ICU when built without Unicode support, and the Python library may be skipped without error (but with a notice) if you don't have Python installed.
-
Messages from the build tool that report the number of targets that were built or skipped. Don't be surprised if those numbers don't make any sense to you; there are many targets per library.
-
Build action messages describing what the tool is doing, which look something like:
toolset-name.c++ long/path/to/file/being/built
-
Compiler warnings.
5.4 In Case of Build Errors
The only error messages you see when building Boost—if any—should be related to the IOStreams library's support of zip and bzip2 formats as described here. Install the relevant development packages for libz and libbz2 if you need those features. Other errors when building Boost libraries are cause for concern.
If it seems like the build system can't find your compiler and/or linker, consider setting up a user-config.jam file as described in the Boost.Build documentation. If that isn't your problem or the user-config.jam file doesn't work for you, please address questions about configuring Boost for your compiler to the Boost.Build mailing list.
6 Link Your Program to a Boost Library
To demonstrate linking with a Boost binary library, we'll use the following simple program that extracts the subject lines from emails. It uses the Boost.Regex library, which has a separately-compiled binary component.
#include <boost/regex.hpp>
#include <iostream>
#include <string>
int main()
{
std::string line;
boost::regex pat( "^Subject: (Re: |Aw: )*(.*)" );
while (std::cin)
{
std::getline(std::cin, line);
boost::smatch matches;
if (boost::regex_match(line, matches, pat))
std::cout << matches[2] << std::endl;
}
}
There are two main challenges associated with linking:
- Tool configuration, e.g. choosing command-line options or IDE build settings.
- Identifying the library binary, among all the build variants, whose compile configuration is compatible with the rest of your project.
There are two main ways to link to libraries:
-
You can specify the full path to each library:
$ c++ -I path/to/boost_1_35_0 example.cpp -o example / ~/boost/lib/libboost_regex-gcc34-mt-d-1_35.a -
You can separately specify a directory to search (with -Ldirectory) and a library name to search for (with -llibrary,2 dropping the filename's leading lib and trailing suffix (.a in this case):
$ c++ -I path/to/boost_1_35_0 example.cpp -o example / -L~/boost/lib/ -lboost_regex-gcc34-mt-d-1_35As you can see, this method is just as terse as method A for one library; it really pays off when you're using multiple libraries from the same directory. Note, however, that if you use this method with a library that has both static (.a) and dynamic (.so) builds, the system may choose one automatically for you unless you pass a special option such as -static on the command line.
In both cases above, the bold text is what you'd add to the command lines we explored earlier.
6.1 Library Naming
In order to choose the right binary for your build configuration you need to know how Boost binaries are named. Each library filename is composed of a common sequence of elements that describe how it was built. For example, libboost_regex-vc71-mt-d-1_34.lib can be broken down into the following elements:
-
lib
- Prefix: except on Microsoft Windows, every Boost library name begins with this string. On Windows, only ordinary static libraries use the lib prefix; import libraries and DLLs do not. 4 boost_regex
- Library name: all boost library filenames begin with boost_. -vc71
- Toolset tag: identifies the toolset and version used to build the binary. -mt
- Threading tag: indicates that the library was built with multithreading support enabled. Libraries built without multithreading support can be identified by the absence of -mt. -d
-
ABI tag: encodes details that affect the library's interoperability with other compiled code. For each such feature, a single letter is added to the tag:
Key Use this library when: s linking statically to the C++ standard library and compiler runtime support libraries. g using debug versions of the standard and runtime support libraries. y using a special debug build of Python. d building a debug version of your code.5 p using the STLPort standard library rather than the default one supplied with your compiler. n using STLPort's deprecated “native iostreams” feature.6 For example, if you build a debug version of your code for use with debug versions of the static runtime library and the STLPort standard library in “native iostreams” mode, the tag would be: -sgdpn. If none of the above apply, the ABI tag is ommitted.
-1_34
- Version tag: the full Boost release number, with periods replaced by underscores. For example, version 1.31.1 would be tagged as "-1_31_1". .lib
- Extension: determined according to the operating system's usual convention. On most unix-style platforms the extensions are .a and .so for static libraries (archives) and shared libraries, respectively. On Windows, .dll indicates a shared library and (except for static libraries built by the gcc toolset, whose names always end in .a) .lib indicates a static or import library. Where supported by toolsets on unix variants, a full version extension is added (e.g. ".so.1.34") and a symbolic link to the library file, named without the trailing version number, will also be created.
6.2 Test Your Program
To test our subject extraction, we'll filter the following text file. Copy it out of your browser and save it as jayne.txt:
To: George Shmidlap From: Rita Marlowe Subject: Will Success Spoil Rock Hunter? --- See subject.
If you linked to a shared library, you may need to prepare some platform-specific settings so that the system will be able to find and load it when your program is run. Most platforms have an environment variable to which you can add the directory containing the library. On many platforms (Linux, FreeBSD) that variable is LD_LIBRARY_PATH, but on MacOS it's DYLD_LIBRARY_PATH, and on Cygwin it's simply PATH. In most shells other than csh and tcsh, you can adjust the variable as follows (again, don't type the $—that represents the shell prompt):
$ VARIABLE_NAME=path/to/lib/directory:${VARIABLE_NAME}
$ export VARIABLE_NAME
On csh and tcsh, it's
$ setenv VARIABLE_NAME path/to/lib/directory:${VARIABLE_NAME}
Once the necessary variable (if any) is set, you can run your program as follows:
$ path/to/compiled/example < path/to/jayne.txt
The program should respond with the email subject, “Will Success Spoil Rock Hunter?”
7 Conclusion and Further Resources
This concludes your introduction to Boost and to integrating it with your programs. As you start using Boost in earnest, there are surely a few additional points you'll wish we had covered. One day we may have a “Book 2 in the Getting Started series” that addresses them. Until then, we suggest you pursue the following resources. If you can't find what you need, or there's anything we can do to make this document clearer, please post it to the Boost Users' mailing list.
- Boost.Build reference manual
- Boost.Jam reference manual
- Boost Users' mailing list
- Boost.Build mailing list
- Boost.Build Wiki
- Index of all Boost library documentation
Onward
Good luck, and have fun!
—the Boost Developers
| [1] | If developers of Boost packages would like to work with us to make sure these instructions can be used with their packages, we'd be glad to help. Please make your interest known to the Boost developers' list. |
| [2] | That option is a dash followed by a lowercase “L” character, which looks very much like a numeral 1 in some fonts. |
| [3] | Remember that warnings are specific to each compiler implementation. The developer of a given Boost library might not have access to your compiler. Also, some warnings are extremely difficult to eliminate in generic code, to the point where it's not worth the trouble. Finally, some compilers don't have any source code mechanism for suppressing warnings. |
| [4] | This convention distinguishes the static version of a Boost library from the import library for an identically-configured Boost DLL, which would otherwise have the same name. |
| [5] | These libraries were compiled without optimization or inlining, with full debug symbols enabled, and without NDEBUG #defined. Although it's true that sometimes these choices don't affect binary compatibility with other compiled code, you can't count on that with Boost libraries. |
| [6] | This feature of STLPort is deprecated because it's impossible to make it work transparently to the user; we don't recommend it. |
更多推荐
0
0- 0
已为社区贡献1条内容
所有评论(0)