Author:Fourier Email:samssmarm@gmail.com

 

AMP:(AsymmetricMultiple Processing)

Scenario:cpu core 0 run Linux, cpu core 1 run uC/OS-II RTOS. HDMI display panellink to Linux, LCD display panel link to uC/OS-II RTOS.

 

Platform:

MarsBoard(freesclae i.mx6 dual Coretex-A9 core, 1GB 64bit DDR3)

Panda Board(TIOMAP4460 dual Cortex-A9 core, 1GB 32bit DDR3)

Altera SoC EVMBoard(dual Cortex-A9 core, (512MB+256MB ECC) DDR3 on HPS, 512MB on FPGA)

 

Video Demo On Mars Board:

Youtube: http://youtu.be/yb6KC6Cf8i4

http://youtu.be/1uzrX-YZBnQ

Youku: http://v.youku.com/v_show/id_XNTMyNTAzNjky.html

 

AMP Port:

Linux SMP bootprocedure is not mention here, For detail about the Linux SMP boot procedure pleaserefer to the document here,http://www.linux-arm.org/LinuxBootLoader/SMPBoot.I just move the boot secondary procedure from Linux to U-boot as figure 1 in the AMP implementation, and figure2 describe the GIC relationship between two core and physical memory layoutbetween Linux and uC/OS-II.

Figure 1

Figure 2

 

 

Display Subsystem Block on Mars Board and Panda Board:

Figure 3 imx6 display subsystem(Mars Board)

 

Figure 4 omap4460 display subsystem on panda board

Logo
Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具；    1.1 mii-tool 介绍；    mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

avatar Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

avatar Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

<br />　　Linux系统下超级终端Minicom的使用方法 <br />　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： <br />　　1． 启动minicom <br />　　以root权限登录系统 <br />　　使用命令 <br />　　minicom –s 则minicom启动，屏

avatar Linux