#yum install httpd

#yum install gcc

#yum install glibc glibc-common

#yum install gd gd-devel

#yum install php        nagios3.2.0以后的版本必须安装php，nagios页面访问才正常

#/usr/sbin/useradd -m nagios   添加一个名为nagios的用户用以专门跑nagios          

#passwd nagios                 设置密码

#/usr/sbin/groupadd nagios  添加nagios用户组，用以通过web页面提交外部控制命令

#/usr/sbin/usermod -a -G nagios nagios 将nagios用户加入nagios组

#/usr/sbin/usermod -a -G nagios apache 将apache用户加入nagios组

#mkdir ~/downloads#cd ~/downloads

#wget http://nchc.dl.sourceforge.net/sourceforge/nagios/nagios-3.3.1.tar.gz

#wget http://nchc.dl.sourceforge.net/sourceforge/nagiosplug/nagios-plugins-1.4.15.tar.gz#cd ~/downloads#tar xzf nagios-3.3.1.tar.gz

#cd nagios-3.3.1

#./configure --with-command-group=nagcmd

#make all

#make install

#make install-init  

#make install-config

#make install-commandmode
这时nagios基本已经安装完成，默认安装后的配置文件用于启动nagios是没有问题的。

#vi usr/local/nagios/etc/objects/contacts.cfg修改nagiosadmin这行其中的邮件地址为你的email地址，以将报警邮件发到你的邮箱。

#make install-webconf   安装nagios的web接口

#htpasswd -c /usr/local/nagios/etc/htpasswd.users nagiosadmin
设置登陆web界面时HTTP验证的账号密码

#service httpd restart  启动apache

#cd ~/downloads

#tar xzf nagios-plugins-1.4.15.tar.gz

#cd nagios-plugins-1.4.15

#./configure --with-nagios-user=nagios --with-nagios-group=nagios

#make

#make install
安装插件，安装后所有插件命令将被安装到/usr/local/nagios/libexec目录下

#cd ~/downloads

#wget http://nagios.manubulon.com/nagios-snmp-plugins.1.1.1.tgz

#tar xzf nagios-snmp-plugins.1.1.1.tgz

#cd nagios_plugins

配置check_snmp_int.pl这些插件的使用时需要配置cpan，CPAN是Comprehensive Perl Archive Network的缩写.。它是一个巨大的Perl软件收藏库，收集了大量有用的Perl模块(modules)及其相关的文件。这里主要是使用Perl-Net-SNMP模块。有两种方式安装（建议手工安装）：
A）通过CPAN来安装

#perl -MCPAN -e shell

cpan> install Net::SNMP

B) 手工安装(建议手工安装，先下载模块) 

首先去官方网站www.cpan.org下载以下几个模块

Crypt::DES

Digest::MD5

Digest::SHA1

Digest::HMAC

Net::SNMP

下载后对于每个模块依次按照下面的方式安装

#tar zxf <module>.tar.gz   <module>表示模块名，具体请按上面提到的模块替换

#cd <module>            <module>表示模块名，具体请按上面提到的模块替换

#perl Makefile.pl         //#chmod 755 Makefile.PL

#make test

#make install

注意：Net::SNMP模块必须在最后安装。至此Net::SNMP手动安装完毕

#./install.sh 
执行nagios-snmp-plugins安装脚本,执行后会将插件命令安装到/usr/local/nagios/libexec下

至此nagios基本已经安装完毕，但这时还不能马上启动nagios，需要以下设置。

#chkconfig --add nagios  将nagios添加到服务中

#chkconfig nagios on    设置服务为自启动

#/usr/local/nagios/bin/nagios -v /usr/local/nagios/etc/nagios.cfg
检测nagios的配置是否正确，在后面配置nagios过程中我们为了检测配置的是否正确需要不断执行该命令来检查配置文件。

#service nagios start    启动nagios

需要注意的是，Centos默认打开了selinux并且运行于强制安全模式，这将导致在打开nagios的web界面时会出现Internet Server Error的错误。

#getenforce   查看是否运行于强制模式，结果为1表示是

#setenforce 0  更改selinux运行于宽容模式

但是这个设置重启后就会失效，如需要重启后保持该设置需要修改/etc/sysconfig/selinux，将其中的SELINUX= enforcing更改为SELINUX= permissive并重启系统。当然你也可以改成disable禁用selinux。

也可以不更改selinux的运行模式，解决办法为：

#chcon -R -t httpd_sys_content_t /usr/local/nagios/sbin/

#chcon -R -t httpd_sys_content_t /usr/local/nagios/share/

cfg_file=/usr/local/nagios/etc/objects/commands.cfg   包含配置文件，下同

cfg_file=/usr/local/nagios/etc/objects/contacts.cfg

cfg_file=/usr/local/nagios/etc/objects/timeperiods.cfg

cfg_file=/usr/local/nagios/etc/objects/templates.cfg

cfg_file=/usr/local/nagios/etc/objects/localhost.cfg

cfg_file=/usr/local/nagios/etc/objects/switch.cfg

cfg_dir=/usr/local/nagios/etc/services 包含配置目录，目录下所有cfg文件将被包含；下同

cfg_dir=/usr/local/nagios/etc/hosts

cfg_dir=/usr/local/nagios/etc/commands

cfg_dir=/usr/local/nagios/etc/switches

cfg_dir=/usr/local/nagios/etc/routers

[root@localhost etc]# /usr/local/nagios/libexec/check_snmp_storage.pl -H 192.168.1.200 -C mypublic -2 -m "^Virtual Memory$" -w 70 -c 90

Virtual Memory: 21%used(531MB/2472MB) (<70%) : OK

[root@localhost etc]# cat resource.cfg |grep -v '#'| sed /^$/d  查看resource.cfg配置

$USER1$=/usr/local/nagios/libexec

$USER7$=-C mypublic -2

define command{

        command_name    check_snmp_storage

        command_line    $USER1$/check_snmp_storage.pl -H $HOSTADDRESS$ $USER7$ $ARG1$ -w $ARG2$ -c $ARG3$

}

define host{

        use             windows-server      定义使用的模板

        host_name       web83              定义主机名为web83

        alias           web server on 111.83   主机别名

        address         192.168.1.200      主机IP地址

        hostgroups      linuxtoneweb           将该主机归到linuxtoneweb这个组，如果要归到多个组里，用逗号分隔组名

}

define hostgroup{

        hostgroup_name  linuxtoneweb

        alias           linuxtone web servers

}

define hostgroup{

        hostgroup_name  linuxtoneweb

        alias           linuxtone web servers
        members       web83   设置该组的成员，需要是在host中定义的主机名，多个成员请用逗号分隔

}

define service {

        hostgroup_name          linuxtone,linuxtoneweb,database  定义监控对象

        name                    memory              设置服务名

        service_description     check memory             服务描述

        check_period            24x7                  监控周期设置            

        max_check_attempts      4                     最大检测尝试次数

        normal_check_interval   3                       正常检测间隔时间

        retry_check_interval    2                        重试检测间隔时间

        contact_groups          admins                  报警联系组

        notification_interval   10                         通知间隔                        

        notification_period     24x7                      通知周期设置

        notification_options    w,u,c,r                    定义什么状态时报警

        check_command           check_snmp_storage!-m "^Virtual Memory$"!70!90

}

# Windows host definition template - This is NOT a real host, just a template!

define host{

        name                    windows-server  ; The name of this host template

        use                     generic-host    ; Inherit default values from the generic-host template

        check_period            24x7            ; By default, Windows servers are monitored round the clock

        check_interval          5               ; Actively check the server every 5 minutes

        retry_interval          1               ; Schedule host check retries at 1 minute intervals

        max_check_attempts      10              ; Check each server 10 times (max)

        check_command           check-host-alive        ; Default command to check if servers are "alive"

        notification_period     24x7            ; Send notification out at any time - day or night

        notification_interval   30              ; Resend notifications every 30 minutes

        notification_options    d,r             ; Only send notifications for specific host states

        contact_groups          admins          ; Notifications get sent to the admins by default

        hostgroups              windows-servers ; Host groups that Windows servers should be a member of

        register                0               ; DONT REGISTER THIS - ITS JUST A TEMPLATE

        }

define contact{

        contact_name                    nagiosadmin             ; Short name of user

        use                             generic-contact         ; Inherit default values from generic-contact template (defined above)

        alias                           Nagios Admin            ; Full name of user

        email                           netkey@linuxtone.com ; <<***** CHANGE THIS TO YOUR EMAIL ADDRESS ******

        address1                        alarm@hotmail.com ;这里是个自定义的变量设置，定义了一个SMS地址用以接收SMS报警信息，联系人的自定义变量只能使用address1-address6；通过这个设置你可以实现多种报警方式，如电话，手机短信等，通过在这里设置你的电话，手机号，然后到报警命令定义里定义一个命令即可。

        }

define contact{

        name                            generic-contact         ; The name of this contact template

        service_notification_period     24x7                    ; service notifications can be sent anytime

        host_notification_period        24x7                    ; host notifications can be sent anytime

        service_notification_options    w,u,c,r,f,s             ; send notifications for all service states, flapping events, and scheduled downtime events

        host_notification_options       d,u,r,f,s               ; send notifications for all host states, flapping events, and scheduled downtime events

        service_notification_commands   notify-service-by-email,notify-service-by-sms   ; send service notifications via email

        host_notification_commands      notify-host-by-email,notify-host-by-sms ; send host notifications via email

        register                        0                       ; DONT REGISTER THIS DEFINITION - ITS NOT A REAL CONTACT, JUST A TEMPLATE!

        }

define timeperiod{

        timeperiod_name 24x7

        alias           24 Hours A Day, 7 Days A Week

        sunday          00:00-24:00

        monday          00:00-24:00

        tuesday         00:00-24:00

        wednesday       00:00-24:00

        thursday        00:00-24:00

        friday          00:00-24:00

        saturday        00:00-24:00

        }

define command{

        command_name    notify-host-by-email

        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n" | /bin/mail -s "** $NOTIFICATIONTYPE$ Host Alert: $HOSTNAME$ is $HOSTSTATE$ **" $CONTACTEMAIL$

        }

# 'notify-service-by-email' command definition

define command{

        command_name    notify-service-by-email

        command_line    /usr/bin/printf "%b" "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$" | /bin/mail -s "** $NOTIFICATIONTYPE$ Service Alert: $HOSTALIAS$/$SERVICEDESC$ is $SERVICESTATE$ **" $CONTACTEMAIL$

        }

# 'notify-host-by-sms' command definition

define command{

        command_name    notify-host-by-sms

        command_line    php /usr/local/nagios/share/sms/smssendmsg.php $CONTACTADDRESS1$ "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\nHost: $HOSTNAME$\nState: $HOSTSTATE$\nAddress: $HOSTADDRESS$\nInfo: $HOSTOUTPUT$\n\nDate/Time: $LONGDATETIME$\n"

        }

# 'notify-service-by-sms' command definition

define command{

        command_name    notify-service-by-sms

        command_line    php /usr/local/nagios/share/sms/smssendmsg.php $CONTACTADDRESS1$ "***** Nagios *****\n\nNotification Type: $NOTIFICATIONTYPE$\n\nService: $SERVICEDESC$\nHost: $HOSTALIAS$\nAddress: $HOSTADDRESS$\nState: $SERVICESTATE$\n\nDate/Time: $LONGDATETIME$\n\nAdditional Info:\n\n$SERVICEOUTPUT$"

        }

安装rrdtool，rrdtool不能直接通过yum安装，可以加入Dag RPM Repository以便让yum能找到rrdtool

#wget http://dag.wieers.com/rpm/packages/rpmforge-release/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

#rpm -Uvh rpmforge-release-0.3.6-1.el5.rf.i386.rpm

#yum install rrdtool

安装net-snmp

# yum -y install net-snmp net-snmp-utils net-snmp-libs php-mysql

安装cacti
#cd ~/downloads
#wget http://www.cacti.net/downloads/cacti-0.8.7i.tar.gz
#tar zxvf cacti-0.8.7i.tar.gz
#mkdir –p /usr/local/wwwroot
#cp –rf cacti-0.8.7.d /usr/local/wwwroot/cacti

下面开始导入数据库，mysql数据库的基本安全配置这里不做说明，请参考以前的postfix邮件安装文档中的mysql设置部分。

#mysql –u root –p
mysql>create database cacti;            创建一个数据库供cacti使用
mysql>use cacti;                      

Mysql>source /usr/local/wwwroot/cacti/cacti.sql     导入mysql数据库
mysql> grant all privileges on cacti.* to cacti@localhost identified by "cacti";

Query OK, 0 rows affected (0.03 sec)

添加一个数据库账号cacti 密码为cacti用以访问cacti数据库
Mysql>flush privileges;    刷新权限信息

Apache设置
#vi /etc/http/conf/httpd.conf    编辑cacti站点的配置文件，文件内容如下：

Alias /cacti "/usr/local/wwwroot/cacti"

<Directory "/usr/local/wwwroot/cacti ">

   Options FollowSymLinks MultiViews

   AllowOverride None

   Order allow,deny

   Allow from all

</Directory>

修改cacti的配置文件

#vi /usr/local/wwwroot/cacti/include/config.php

  /* load up old style plugins here */

  $plugins = array();

  $url_path = "/cacti/";
修改其中的数据库连接信息，设置好数据库主机地址，用户，密码信息。
#chmod 777 -R rra  log

至此安装完成，访问http://ip/cacti/install根据提示安装cacti （ip换成你对应的主机ip地址）
-----------------------------------------------------------------------------------------------

访问报错：

上文提到的是比较大众化的安装方法，我本人的MySQL是手动编译的，mysql.sock放在了/usr/local/mysql/data/目录下，

导致访问http://192.168.1.210/cacti/报错

FATAL: Cannot connect to MySQL server on ‘localhost’. Please make sure you have specified

a valid MySQL database name in ‘include/config.php’

事实上，config.php里的配置是没有错的，因为刚才安装过程一切顺利已经说明了这一点，

网上说poller.php是使用/var/lib/mysql/mysql.sock的。

mysql是编译安装的，mysql.sock在/usr/local/mysql/data/mysql.sock位置，于是做了两个软链接

[root@T-001-210 mysql]# ln -s /usr/local/mysql/data/mysql.sock /var/lib/mysql/mysql.sock

[root@T-001-210 mysql]# ln -s /usr/local/mysql/data/mysql.sock /tmp/mysql.sock

再访问http://192.168.1.210/cacti/ 就正常了。问题解决。

---------------------------------------------------------------------------------------------------

接下来安装cacti的插件管理
#cd ~/download/

#wget http://mirror.cactiusers.org/downloads/plugins/cacti-plugin-0.8.7d-PA-v2.4.zip
#unzip cacti-plugin-0.8.7d-PA-v2.4.zip
#mysql –u root –p cacti<pa.sql      导入sql到cacti库中
#cd files-0.8.7d/
#cp –rf * /usr/local/wwwroot/cacti    复制相关文件到cacti下

首先需要安装ndoutils以将nagios的数据能导入到mysql数据库中。
#yum -y install mysql-devel    安装mysql开发包以编译ndoutils

#wget http://nchc.dl.sourceforge.net/sourceforge/nagios/ndoutils-1.4b9.tar.gz

#tar zxvf ndoutils-1.4b9.tar.gz
#cd ndoutils

#./configure --prefix=/usr/local/nagios  LDFLAGS=-L/usr/lib --with-mysql-inc=/usr/include/mysql --with-mysql-lib=/usr/lib/mysql --enable-mysql --disable-pgsql  --with-ndo2db-user=nagios --with-ndo2db-group=nagios

#make

#make install    //此命令可不用执行

2．准备配置文件
[root@rhel ndoutils-1.4b9]# cp –v src/{ndomod-3x.o,ndo2db-3x,file2sock,log2ndo} /var/www/html/nagios/bin
[root@rhel ndoutils-1.4b9]# cd db
[root@rhel db]# ./installdb -u cacti -p cacti -hlocalhost -d cacti
[root@rhel db]# cd ..
[root@rhel ndoutils-1.4b9]# cp –v config/{ndo2db.cfg-sample,ndomod.cfg-sample} /usr/local/nagios/etc
[root@rhel ndoutils-1.4b9]# mv//install/ndoutils-1.4b9/config/ndo2db.cfg-sample /usr/local/nagios/etc/ndo2db.cfg
[root@rhel ndoutils-1.4b9]# mv /install/ndoutils-1.4b9/config/ndomod.cfg-sample /usr/local/nagios/etc/ndomod.cfg
[root@rhel ndoutils-1.4b9]# chmod 644 /usr/local/nagios/etc/ndo*
[root@rhel ndoutils-1.4b9]# chown nagios:nagios /usr/local/nagios/etc/*
[root@rhel ndoutils-1.4b9]# chown nagios:nagios /usr/local/nagios/bin/*
[root@rhel ndoutils-1.4b9]#

-------------------------------------------------------------------------------------------------------------

报错：

[root@T-001-210 db]# ./installdb -u cacti -p cacti -hlocalhost -d cacti

Can't locate DBI.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 .) at ./installdb line 24.

BEGIN failed--compilation aborted at ./installdb line 24.

请安装perl-DBD-MySQL

[root@T-001-210 db]# yum install perl-DBD-MySQL

----------------------------------------------------------------------------------------------------------------

[root@T-001-210 db]# ./installdb -ucacti -pcacti -hlocalhost -d cacti

DBD::mysql::db do failed: Table 'cacti.nagios_dbversion' doesn't exist at ./installdb line 51.

** Creating tables for version 1.4b9

     Using mysql.sql for installation...

sh: mysql: command not found

Installation from mysql.sql failed at ./installdb line 59.

请导入mysql.sql表

[root@T-001-210 db]# /usr/local/mysql/bin/mysql -ucacti -pcacti cacti < mysql.sql

―――――――――――――――――――――――――――――――――――――

#./db/installdb -ucacti -pcacti  -h localhost -d cacti

#cp config/ndomod.cfg /usr/local/nagios/etc

修改nagios主配置文件
#vi /usr/local/nagios/etc/nagios.cfg
添加以下内容
check_external_commands=1

command_check_interval=-1

event_broker_options=-1

broker_module=/usr/local/nagios/bin/ndomod.o config_file=/usr/local/nagios/etc/ndomod.cfg

process_performance_data=1

添加的内容至此结束

#cd src

# cp ndomod-3x.o ndo2db-3x log2ndo file2sock /usr/local/nagios/bin

#cd ..

#cp src/ndo2db-3x   /usr/local/nagios/bin/ndo2db

# mv /usr/local/nagios/bin/ndomod-3x.o /usr/local/nagios/bin/ndomod.o  //新添加

#cp config/ndo2db.cfg   /usr/local/nagios/etc

修改配置文件ndocmd.cfg和ndo2db.cfg，这里我的配置文件内容为：

[root@localhost downloads]# cat /usr/local/nagios/etc/ndomod.cfg |grep -v '^#'|sed /^$/d

instance_name=default

output_type=tcpsocket

output=localhost

tcp_port=5668

output_buffer_items=5000

buffer_file=/usr/local/nagios/var/ndomod.tmp

file_rotation_interval=14400

file_rotation_timeout=60

reconnect_interval=15

reconnect_warning_interval=15

data_processing_options=-1

config_output_options=2

[root@localhost downloads]# cat /usr/local/nagios/etc/ndo2db.cfg |grep -v '^#'|sed /^$/d

ndo2db_user=nagios

ndo2db_group=nagios

socket_type=tcp

socket_name=/usr/local/nagios/var/ndo.sock

tcp_port=5668

db_servertype=mysql

db_host=localhost

db_port=3306

db_name=cacti

db_user=cacti

db_pass=cacti

db_prefix=npc_

max_timedevents_age=1440

max_systemcommands_age=10080

max_servicechecks_age=10080

max_hostchecks_age=10080

max_eventhandlers_age=44640

debug_level=1

debug_verbosity=1

debug_file=/usr/local/nagios/var/ndo2db.debug

max_debug_file_size=1000000

#/usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg    启动ndo2db

#cd ~/downloads
#wget http://www.aurore.net/projects/php-json/php-json-ext-1.2.0.tar.bz2

#tar xvjf  php-json-ext-1.2.0.tar.bz2

#cd php-json-ext-1.2.0

#phpize            编译前初始化php环境

#./configure

#make

#make install

#vi /etc/php.d/json.ini
extension=json.so

#/usr/sbin/httpd -k graceful    重启apache

为了验证是否成功可使用phpinfo查看是否已支持json

―――――――――――――――――――――――――――――――

#yumdownloader php-common

php -m | grep json   
json

#cd ~/downloads
#wget http://www.assembla.com/spaces/npc/documents/aUjAwmdW8r3BuPab7jnrAJ/download?filename=npc-2.0.0b.166.tar.gz

wget   http://dlwt.csdn.net/fd.php?i=659714146741849&s=796b68562511c6534bfc15d7b04711f4/npc-2.0.3.tar.gz  新链接可用
#mv npc /usr/local/wwwroot/cacti/plugins/
启用cacti的插件功能，以admin用户登陆cacti，在console中的user management里对admin的用户权限进行编辑，勾选上Plugin Management，然后到插件管理中心安装并启用NPC即可。

在'User Management'中选择'admin',在下边'Realm Permissions'中钩选'Plugin Management'。这时左侧Configuration下会出现'Plugin Management'连接，进去后在'uninstalled'中安装npc，然后在'intalled'中enable npc,然后在回去admin的'Realm Permissions'中会出现'use npc'，如果没有钩选就把它选中。

接着在左侧栏目中选择settings,点选npc的标签

钩选Remote Commands

Nagios Command File Path：     /usr/local/nagios/var/rw/nagios.cmd

<这个文件启动nagios后会产生，根据实际的位置写>

Nagios URL：      [url]http://yourserver/nagios/[/url]

保存就可以了， 至此安装就完成了。

启动服务mysql httpd ndo nagios

#service mysqld start

#service httpd start

#/usr/local/nagios/bin/ndo2db -c /usr/local/nagios/etc/ndo2db.cfg

 #service nagios start

访问http://yourserver/cacti/

选择npc标签就可以看到nagios所检测的主机信息，唯一不足的是我打开这个页面的速度有些慢，需要进一步寻找原因来进行优化.npc提供的这一套界面很好看（个人感觉）。  

Could not open command file '/usr/local/nagios/var/rw/nagios.cmd' for update!

The permissions on the external command file and/or directory may be incorrect. Read the FAQs on how to setup proper permissions.

An error occurred while attempting to commit your command for processing.

# EXTERNAL COMMAND FILE

# This is the file that Nagios checks for external command requests.

# It is also where the command CGI will write commands that are submitted

# by users, so it must be writeable by the user that the web server

# is running as (usually 'nobody').  Permissions should be set at the

# directory level instead of on the file, as the file is deleted every

# time its contents are processed.

这段话的核心意思是apache的运行用户要有对文件写的权限.权限应该设置在目录上,因为每次文件的内容被处理后文件就会被删掉

 command_file=/usr/local/nagios/var/rw/nagios.cmd