RTL8723BU WiFi—蓝牙模块移植

硬件：imx6q操作系统：Android4.4.2本次修改基于厂商提供的RTL8723BU_WiFi_linux_v4.3.16_14189.20150519_BTCOEX2015119-5844包下载链接：http://download.csdn.net/detail/bhj1119/9761769一修改记录：1.配置linux内核(1)Net

拿破仑的海阔天空

3756人浏览 · 2017-09-21 19:37:33

拿破仑的海阔天空 · 2017-09-21 19:37:33 发布

硬件：imx6q

操作系统：Android4.4.2

本次修改基于厂商提供的RTL8723BU_WiFi_linux_v4.3.16_14189.20150519_BTCOEX2015119-5844包

下载链接：http://download.csdn.net/detail/bhj1119/9761769

一修改记录：
1.配置linux内核
(1)Networking support --->Wireless下增加802.11 协议栈的支持
--- Wireless
<M> cfg80211 - wireless configuration API
[*] nl80211 testmode command
[*] enable developer warnings
[*] cfg80211 regulatory debugging
[*] enable powersave by default
[ ] cfg80211 DebugFS entries
[ ] use statically compiled regulatory rules database
[*] cfg80211 wireless extensions compatibility
[*] Wireless extensions sysfs files
-*- Common routines for IEEE802.11 drivers
[ ] lib80211 debugging messages
[*] Allow reconnect while already connected
<M> Generic IEEE 802.11 Networking Stack (mac80211)
[ ] PID controller based rate control algorithm
[*] Minstrel
[*] Minstrel 802.11n support
Default rate control algorithm (Minstrel) --->
[*] Enable mac80211 mesh networking (pre-802.11s) support
[*] Enable LED triggers
[ ] Export mac80211 internals in DebugFS
[ ] Select mac80211 debugging features --->
(2) 配置Device Drivers --->USB support ---><*> USB Wireless Device Management support 支持WIFI

2.将RTL8723BU_WiFi_linux_v4.3.16_14189.20150519_BTCOEX2015119-5844/driver下的压缩包拷贝到ANDROID_SDK/kernel_imx/drivers/net/wireless下，解压，修改其Makefile，编译wifi驱动模块,修改内容如下：
CONFIG_PLATFORM_IMX6Q = y

ifeq ($(CONFIG_PLATFORM_IMX6Q), y)
EXTRA_CFLAGS += -DCONFIG_LITTLE_ENDIAN
EXTRA_CFLAGS += -DCONFIG_IOCTL_CFG80211 -DRTW_USE_CFG80211_STA_EVENT -DCONFIG_PLATFORM_ANDROID -DCONFIG_ANDROID - DCONFIG_CONCURRENT_MODE
ARCH := arm
CROSS_COMPILE := XXX/prebuilts/gcc/linux-x86/arm/arm-eabi-4.6/bin/arm-eabi-
KSRC := XXX/kernel_imx//
MODULE_NAME := 8723bu
endif
如果（1）中选项没有选上，会导致加载wifi模块时报如下错误：
rtl8723bu: no symbol version for cfg80211_ready_on_channel
rtl8723bu: Unknown symbol cfg80211_ready_on_channel (err -22)
rtl8723bu: Unknown symbol odm_SwAntDetectInit (err 0)
rtl8723bu: no symbol version for __ieee80211_get_channel
rtl8723bu: Unknown symbol __ieee80211_get_channel (err -22)
rtl8723bu: no symbol version for cfg80211_roamed
rtl8723bu: Unknown symbol cfg80211_roamed (err -22)
rtl8723bu: no symbol version for wiphy_register
rtl8723bu: Unknown symbol wiphy_register (err -22)
原因就是：编译WiFi模块时会去KSRC所指的路径下找相应的库，若果相关的编译选项没有选上会导致某些库缺失，从而导致编出来的WiFi模块不完整。
上述是由于编译内核时内有勾选80211协议栈导致。

3.用厂商提供的hardware/realtek 替换hardware/realtek
4.用厂商提供的wpa_supplicant_8_kk_4.4_rtw_r12456.20141003替换ANDROID_SDK/extern/wpa_supplicant_8，并修改文件夹的名字为wpa_supplicant_8。
5.hardware/libhardware_legacy/wifi/Android.mk
修改内容如下：
--- Android.mk (版本 170)
+++ Android.mk (工作副本)
@@ -49,15 +49,21 @@
LOCAL_CFLAGS += -DWIFI_DRIVER_FW_PATH_PARAM=\"$(WIFI_DRIVER_FW_PATH_PARAM)\"
endif

-ifeq ($(BOARD_WLAN_DEVICE),UNITE)
- LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_ath/wpa_supplicant/src/common
- LOCAL_SRC_FILES += wifi/wifi_unite.c
-else ifeq ($(BOARD_WLAN_VENDOR), INTEL)
- LOCAL_SRC_FILES += wifi/wifi_intel.c
- LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_8/src/common
+#ifeq ($(BOARD_WLAN_DEVICE),UNITE)
+# LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_ath/wpa_supplicant/src/common
+# LOCAL_SRC_FILES += wifi/wifi_unite.c
+#else ifeq ($(BOARD_WLAN_VENDOR), INTEL)
+# LOCAL_SRC_FILES += wifi/wifi_intel.c
+# LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_8/src/common
+#else
+# LOCAL_SRC_FILES += wifi/wifi.c
+# LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_8/src/common
+#endif
+
+ifeq ($(BOARD_WIFI_VENDOR), realtek)
+LOCAL_SRC_FILES += ../realtek/wlan/libhardware_legacy/wifi/wifi_realtek.c
else
- LOCAL_SRC_FILES += wifi/wifi.c
- LOCAL_C_INCLUDES += $(LOCAL_PATH)/../../external/wpa_supplicant_8/src/common
+LOCAL_SRC_FILES += wifi/wifi.c
endif

6.修改device/fsl/sabresd_6dq/BoardConfig.mk
修改内容如下：
--- BoardConfig.mk (版本 170)
+++ BoardConfig.mk (工作副本)
@@ -26,6 +26,33 @@
TARGET_BOOTLOADER_BOARD_NAME := SABRESD
PRODUCT_MODEL := SABRESD-MX6DQ

+
+BOARD_WIFI_VENDOR := realtek
+ifeq ($(BOARD_WIFI_VENDOR), realtek)
+WPA_SUPPLICANT_VERSION := VER_0_8_X
+BOARD_WPA_SUPPLICANT_DRIVER := NL80211
+CONFIG_DRIVER_WEXT :=y
+BOARD_WPA_SUPPLICANT_PRIVATE_LIB := lib_driver_cmd_rtl
+BOARD_HOSTAPD_DRIVER := NL80211
+BOARD_HOSTAPD_PRIVATE_LIB := lib_driver_cmd_rtl
+#BOARD_WLAN_DEVICE := rtl8192cu
+#BOARD_WLAN_DEVICE := rtl8192du
+#BOARD_WLAN_DEVICE := rtl8192ce
+#BOARD_WLAN_DEVICE := rtl8192de
+#BOARD_WLAN_DEVICE := rtl8723as
+#BOARD_WLAN_DEVICE := rtl8723au
+#BOARD_WLAN_DEVICE := rtl8189es
+#BOARD_WLAN_DEVICE := rtl8723bs
+BOARD_WLAN_DEVICE := rtl8723bu
+WIFI_DRIVER_MODULE_NAME := "8723bu"
+WIFI_DRIVER_MODULE_PATH := "/system/lib/modules/8723bu.ko"
+WIFI_DRIVER_MODULE_ARG := "ifname=wlan0 if2name=p2p0"
+WIFI_FIRMWARE_LOADER := ""
+WIFI_DRIVER_FW_PATH_STA := ""
+WIFI_DRIVER_FW_PATH_AP := ""
+WIFI_DRIVER_FW_PATH_P2P := ""
+WIFI_DRIVER_FW_PATH_PARAM := ""
+else
# UNITE is a virtual device support both atheros and realtek wifi(ar6103 and rtl8723as)
BOARD_WLAN_DEVICE := UNITE
WPA_SUPPLICANT_VERSION := VER_0_8_UNITE
@@ -39,6 +66,7 @@
BOARD_WPA_SUPPLICANT_PRIVATE_LIB_QCOM := lib_driver_cmd_qcwcn
BOARD_HOSTAPD_PRIVATE_LIB_RTL := lib_driver_cmd_rtl
BOARD_WPA_SUPPLICANT_PRIVATE_LIB_RTL := lib_driver_cmd_rtl
+endif
#for intel vendor
ifeq ($(BOARD_WLAN_VENDOR),INTEL)
BOARD_HOSTAPD_PRIVATE_LIB := private_lib_driver_cmd
@@ -118,3 +146,4 @@
fs_use \
untrusted_app.te \
genfs_contexts

上述步骤完成后，到根目录下执行make 编译整个系统。
二测试
1.安装cfg80211.ko，8723bu.ko依赖此模块，缺省会报如下错误：

8723bu: Unknown symbol cfg80211_ready_on_channel (err 0)
8723bu: Unknown symbol __ieee80211_get_channel (err 0)
8723bu: Unknown symbol cfg80211_roamed (err 0)
8723bu: Unknown symbol wiphy_register (err 0)
8723bu: Unknown symbol cfg80211_disconnected (err 0)
8723bu: Unknown symbol cfg80211_new_sta (err 0)
8723bu: Unknown symbol cfg80211_connect_result (err 0)
8723bu: Unknown symbol cfg80211_inform_bss_frame (err 0)

2.安装8723bu.ko模块，两个模块都安装好之后，执行netcfg，会看到多出wlan0和p2p0设备节点，他们是8723bu驱动创建出来的，放到sys/class/net/下。

lo UP 127.0.0.1/8 0x00000049 00:00:00:00:00:00
can0 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
can1 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
eth0 UP 0.0.0.0/0 0x00001043 1e:ed:19:27:1a:b3
wlan0 DOWN 0.0.0.0/0 0x00001002 7c:c7:09:30:c5:4d
p2p0 DOWN 0.0.0.0/0 0x00001002 7e:c7:09:30:c5:4d

3.执行ifconfig wlan0 up，打开wlan0

4.执行system/bin/wpa_supplicant -Dnl80211 -iwlan0 -c/etc/wifi/wpa_supplicant.conf，启动wpa_supplicant进程。
启动过程报如下错误：
E/wpa_supplicant( 3251): mkdir[ctrl_interface=wlan0]: Permission denied
E/wpa_supplicant( 3251): Failed to initialize control interface 'wlan0'.
E/wpa_supplicant( 3251): You may have another wpa_supplicant process already running or the file was
E/wpa_supplicant( 3251): left by an unclean termination of wpa_supplicant in which case you will need
E/wpa_supplicant( 3251): to manually remove this file before starting wpa_supplicant again.
错误原因：wpa_supplicant进程运行时的配置文件wpa_supplicant.conf文件中的ctrl_interface的路径不对，没有匹配成功，导致进程启动失败。原来ctrl_interface的路径是/var/run/wpa_supplicant，把ctrl_interface改成/data/misc/wifi/wpa_supplicant就可以了。
ctrl_interface在哪里？在工程下的external/wpa_supplicant_8/wpa_supplicant/wpa_supplicant.conf中。
深入分析：
wpa_supplicant_init_iface函数分析
init_iface初始化的第一个工作是解析运行时配置文件。其中，wpa_s->confname的值为“/data/misc/wifi/wpa_supplicant.conf”,解析函数是wpa_config_read。
wpa_s->ctrl_iface = wpa_supplicant_ctrl_iface_init(wpa_s);
if (wpa_s->ctrl_iface == NULL) {
wpa_printf(MSG_ERROR,
"Failed to initialize control interface '%s'.\n"
"You may have another wpa_supplicant process "
"already running or the file was\n"
"left by an unclean termination of wpa_supplicant "
"in which case you will need\n"
"to manually remove this file before starting "
"wpa_supplicant again.\n",
wpa_s->conf->ctrl_interface);
return -1;
}

如果是linux系统，可能没有wpa_supplicant工具，可参考 wpa_supplicant-2.6交叉编译 ，移植此工具。
5.执行system/bin/wpa_cli -p/data/misc/wifi/wpa_supplicant，配置并连接wifi热点。
Could not connect to wpa_supplicant: wlan0 - re-trying

wpa_cli v2.0-devel-4.4.2_rtw_r12456.20141003
Copyright (c) 2004-2013, Jouni Malinen <j@w1.fi> and contributors

This software may be distributed under the terms of the BSD license.
See README for more details.

Selected interface 'wlan0'

Interactive mode

1）> scan
OK
<3>CTRL-EVENT-STATE-CHANGE id=-1 state=3 BSSID=00:00:00:00:00:00 SSID=
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>CTRL-EVENT-STATE-CHANGE id=-1 state=2 BSSID=00:00:00:00:00:00 SSID=
2）> scan_results
bssid / frequency / signal level / flags / ssid
78:eb:14:bd:f6:9e 2412 -58 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] B1412
bc:67:1c:41:29:4d 2437 -65 [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS] systec-cisco
e0:05:c5:23:fc:52 2452 -71 [WPA-PSK-CCMP+TKIP][WPA2-PSK-CCMP+TKIP][WPS][ESS]
30:fc:68:0b:c9:f6 2437 -71 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] gsdq
ec:26:ca:53:ea:f1 2462 -72 [WPA-PSK-CCMP][WPA2-PSK-CCMP][WPS][ESS] TP-LINK_EAF1
00:1f:f3:bf:d0:6f 2462 -73 [WPA2-PSK-CCMP][ESS] tcs apple
d4:ee:07:29:9b:4a 2442 -73 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] Cherry&Filippo
24:69:68:16:a9:1e 2462 -74 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] \xe6\xb2\x83\xe7\x95\x89
fc:d7:33:8d:0a:36 2412 -74 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] dangyuanweixin
b0:c0:90:3a:24:a3 2422 -74 [WPA2-PSK-CCMP][ESS] 360\xe8\xa1\x8c\xe8\xbd\xa6\xe8\xae\xb0\xe5\xbd\x95\xe4\xbb\xaa-A3
c8:3a:35:1f:5f:88 2422 -80 [WPA-PSK-CCMP][WPA2-PSK-CCMP][ESS] wangzihao
c8:3a:35:06:a9:b0 2452 -82 [WPA-PSK-CCMP][ESS] Tenda_06A9B0
00:3a:99:9b:9b:40 2417 -45 [WEP][ESS] systec-AP
00:0c:43:30:50:a0 2437 -51 [ESS] Wii-Link_3050A0
08:10:78:e1:27:a5 2412 -74 [ESS] NETCORE_27A5
3）> add_network
0
4）> set_network 0 ssid "systec-cisco"
OK
5）> set_network 0 psk "XXX"
OK
6）> select_network 0
OK
<3>CTRL-EVENT-STATE-CHANGE id=0 state=3 BSSID=00:00:00:00:00:00 SSID=systec-cisco
<3>CTRL-EVENT-SCAN-RESULTS
<3>WPS-AP-AVAILABLE
<3>Trying to associate with bc:67:1c:41:29:4d (SSID='systec-cisco' freq=2437 MHz)
<3>CTRL-EVENT-STATE-CHANGE id=0 state=5 BSSID=00:00:00:00:00:00 SSID=systec-cisco
<3>CTRL-EVENT-STATE-CHANGE id=0 state=6 BSSID=00:00:00:00:00:00 SSID=systec-cisco
<3>Associated with bc:67:1c:41:29:4d
<3>CTRL-EVENT-STATE-CHANGE id=0 state=7 BSSID=bc:67:1c:41:29:4d SSID=systec-cisco
<3>CTRL-EVENT-STATE-CHANGE id=0 state=8 BSSID=bc:67:1c:41:29:4d SSID=systec-cisco
<3>WPA: Key negotiation completed with bc:67:1c:41:29:4d [PTK=CCMP GTK=TKIP]
<3>CTRL-EVENT-CONNECTED - Connection to bc:67:1c:41:29:4d completed (auth) [id=0 id_str=]
<3>CTRL-EVENT-STATE-CHANGE id=0 state=9 BSSID=bc:67:1c:41:29:4d SSID=systec-cisco
7）enable_network 0
OK

查看链接状态：
> status
bssid=bc:67:1c:41:29:4d
ssid=systec-cisco
id=0
mode=station
pairwise_cipher=CCMP
group_cipher=TKIP
key_mgmt=WPA2-PSK
wpa_state=COMPLETED
p2p_device_address=7c:c7:09:30:c5:4d
address=7c:c7:09:30:c5:4d
<3>CTRL-EVENT-STATE-CHANGE id=0 state=9 BSSID=bc:67:1c:41:29:4d SSID=systec-cisco
<3>CTRL-EVENT-CONNECTED - connection to bc:67:1c:41:29:4d completed (auth) [id=0 id_str=]

执行dhcpcd wlan0 分配IP，此时再netcfg查看，wlan0de ip 已经变成10.0.0.118
root@sabresd_6dq:/ # netcfg
lo UP 127.0.0.1/8 0x00000049 00:00:00:00:00:00
can0 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
can1 DOWN 0.0.0.0/0 0x00000080 00:00:00:00:00:00
eth0 UP 0.0.0.0/0 0x00001043 1e:ed:19:27:1a:b3
wlan0 UP 10.0.0.118/24 0x00001043 7c:c7:09:30:c5:4d
p2p0 DOWN 0.0.0.0/0 0x00001002 7e:c7:09:30:c5:4d

ping 一下看看通不通
root@sabresd_6dq:/ # ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
64 bytes from 192.168.1.1: icmp_seq=1 ttl=63 time=29.1 ms
64 bytes from 192.168.1.1: icmp_seq=2 ttl=63 time=15.9 ms
64 bytes from 192.168.1.1: icmp_seq=3 ttl=63 time=16.4 ms
64 bytes from 192.168.1.1: icmp_seq=4 ttl=63 time=14.3 ms
64 bytes from 192.168.1.1: icmp_seq=5 ttl=63 time=14.0 ms
^C
--- 192.168.1.1 ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 4006ms
rtt min/avg/max/mdev = 14.034/17.991/29.183/5.672 ms

至此wifi模块移植完毕，可以实现扫描，链接，分配IP

Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具； 1.1 mii-tool 介绍； mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

Linux系统下超级终端Minicom的使用方法 　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： 　　1．启动minicom 　　以root权限登录系统 　　使用命令 　　minicom –s 则minicom启动，屏