How to install or upgrade UV4L on Raspbian (for the Raspberry Pi)

To install UV4L open a terminal and type the following commands:
$ curl http://www.linux-projects.org/listing/uv4l_repo/lrkey.asc | sudo apt-key add -
Add the following line to the file /etc/apt/sources.list :
deb http://www.linux-projects.org/listing/uv4l_repo/raspbian/ wheezy main

$ sudo apt-get update
$ sudo apt-get install uv4l uv4l-raspicam
The last two commands will upgrade UV4L to the most recent version, if it's already installed.

If you want the driver to be loaded at boot, also install this optional package:
$ sudo apt-get install uv4l-raspicam-extras
As a convenience, the above package will also provide a service script for starting or stopping the driver at any time:
$ sudo service uv4l_raspicam restart
When (re)starting the service, uv4l will be instructed to parse the configuration file /etc/uv4l/uv4l-raspicam.conf to get the default values for the (main) driver options. You can edit that file as you prefer to add, remove or change the default options. The same service is used at boot.

Now the UV4L core component and the Video4Linux2 driver for the CSI Camera Board are installed. If you occasionally get unexpected errors from the driver, consider updating the firmware with the following command:
$ sudo rpi-update
For detailed informations, options, etc... about the modules installed type accordingly:
$ man uv4l
$ man uv4l-raspicam
To get a list of available options:
$ uv4l --help --driver raspicam --driver-help
If you did not install the optional uv4l-raspicam-extras package (which already contains a script for starting uv4l with the settings taken from a configuration file) but want to quicly test uv4l, load it manually:
$ uv4l --driver raspicam --auto-video_nr --width 640 --height 480 --encoding jpeg
and take a JPEG snapshot from the Camera:
$ dd if=/dev/video0 of=snapshot.jpeg bs=11M count=1
For a list of other use cases click here.

To terminate a running driver, close the applications and kill the corresponding uv4l process:
$ pkill uv4l
Apart from the driver for the Raspberry Pi Camera Board, the following modules or drivers can be optionally installed:
$ sudo apt-get install uv4l-server
$ sudo apt-get install uv4l-uvc
$ sudo apt-get install uv4l-xscreen
$ sudo apt-get install uv4l-mjpegstream
For the Raspberry Pi 2 only, the WebRTC extension for the Streaming Server is also available:
$ sudo apt-get install uv4l-webrtc
Once you have installed the HTTP Streaming Server module, make sure to reload uv4l for it to notice and start the server. Afterwards you can access the server with the browser at the default address and port http://raspberry:8080/ (where raspberry has to be replaced with the actual hostname or IP address of your RaspberryPi).

To get further help:
$ man uv4l-server
$ man uv4l-uvc
$ man uv4l-xscreen
$ man uv4l-mjpegstream


Return to Sections Index
Logo
Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具；    1.1 mii-tool 介绍；    mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

avatar Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

avatar Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

<br />　　Linux系统下超级终端Minicom的使用方法 <br />　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： <br />　　1． 启动minicom <br />　　以root权限登录系统 <br />　　使用命令 <br />　　minicom –s 则minicom启动，屏

avatar Linux