[解决]Kali Linux DHCP自动获取IP失败坑爹的VMWare桥接

root@kali:~# service networking restart[....] Running /etc/init.d/networking restart is deprecated because it may not r[warnble some interfaces ... (warning).[....] Reconfiguring network interfa...

weixin_30782331

2954人浏览 · 2019-08-04 03:46:00

weixin_30782331 · 2019-08-04 03:46:00 发布

root@kali:~# service networking restart
[....] Running /etc/init.d/networking restart is deprecated because it may not r[warnble some interfaces ... (warning).
[....] Reconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:e2:03:ff
Sending on   LPF/eth0/00:0c:29:e2:03:ff
Sending on   Socket/fallback
DHCPRELEASE on eth0 to 192.168.1.1 port 67
Reloading /etc/samba/smb.conf: smbd only.
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:e2:03:ff
Sending on   LPF/eth0/00:0c:29:e2:03:ff
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19
No DHCPOFFERS received.
No working leases in persistent database - sleeping.
done.

　　结果如上图, 笔者用的是VMWare, 运行的是Kali Linux, 希望用桥接模式通过路由器获取动态IP, 但是无论如何也不能正确获取IP地址.

一点点排查

1. 排查DNS

root@kali:~# cat /etc/resolv.conf
nameserver 192.168.1.1
nameserver 114.114.114.114

192.168.1.1在里面, DNS设置没有问题

2. 排查网卡

root@kali:~# cat /etc/network/interfaces 
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
#allow-hotplug eth0
auto eth0
iface eth0 inet dhcp

　　网卡自动激活, 并配置dhcp获取IP方式

3.排查VMWare 桥接设置

由于笔者装有Virual Box & VMWare Workstation, 所以有多个虚拟网卡, 桥接为自动模式, 心想是不是自动桥接到不能连外网的Virtual Box的虚拟网卡了?

果断选成实际外网网卡, 重启Kali Linux networking服务, 问题解决.

root@kali:~# service networking restart
[....] Running /etc/init.d/networking restart is deprecated because it may not r[warnble some interfaces ... (warning).
[....] Reconfiguring network interfaces...Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:e2:03:ff
Sending on   LPF/eth0/00:0c:29:e2:03:ff
Sending on   Socket/fallback
DHCPRELEASE on eth0 to 192.168.1.1 port 67
send_packet: Network is unreachable
send_packet: please consult README file regarding broadcast address.
Reloading /etc/samba/smb.conf: smbd only.
Internet Systems Consortium DHCP Client 4.2.2
Copyright 2004-2011 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/00:0c:29:e2:03:ff
Sending on   LPF/eth0/00:0c:29:e2:03:ff
Sending on   Socket/fallback
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15
DHCPREQUEST on eth0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.1.1
DHCPACK from 192.168.1.1
Reloading /etc/samba/smb.conf: smbd only.
bound to 192.168.1.101 -- renewal in 3353 seconds.
done.

转载于:https://www.cnblogs.com/blackblade/p/3688097.html

Linux

更多推荐

网卡速率和双工模式的配置

http://linux.chinaitlab.com/system/792187.html1、mii-tool 配置网络设备协商方式的工具； 1.1 mii-tool 介绍； mii-tool - view, manipulate media-independent interface status （mii-tool 是查看，管理介质的网络接口的状态）

Linux

Linux虚拟文件系统之文件系统卸载（sys_umount())

Linux中卸载文件系统由umount系统调用实现，入口函数为sys_umount()。较于文件系统的安装较为简单，下面是具体的实现。1. /*sys_umont系统调用*/2. SYSCALL_DEFINE2(umount, char __user *, name, int, flags)3. {4.struct path path;

Linux

Linux系统下超级终端Minicom的使用方法（例如：连接交换机，路由器等）转http://baike.baidu.com/view/2911642.htm?fr=ala0_1

Linux系统下超级终端Minicom的使用方法 　　Linux下的Minicom的功能与下的超级终端功能相似，适于在通过超级终端对设备的管理以及对嵌入操作系统的升级，现写出Minicom的使用手册： 　　1．启动minicom 　　以root权限登录系统 　　使用命令 　　minicom –s 则minicom启动，屏