1.下载php   http://www.php.net/downloads.php

2.解压到对应的目录 比如  php-5.5.10

3.cd 到 php-5.5.-10

4. ./configure --prefix=要安装的目录

5. configure的时候php 会检查需要必须库  libxml

6.最简单的配置是：  ./configure --prefix=php要安装的目录  --with-libxml-dir=已安装libxml的目录

configure之后会出现这样的提示：

Configuring TSRM
checking for stdarg.h... (cached) yes
checking for sigprocmask... yes


Configuring libtool
checking for ld used by cc... /usr/i586-suse-linux/bin/ld
checking if the linker (/usr/i586-suse-linux/bin/ld) is GNU ld... yes
checking for /usr/i586-suse-linux/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking how to recognize dependent libraries... pass_all
checking the maximum length of command line arguments... 98304
checking command to parse /usr/bin/nm -B output from cc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if cc supports -fno-rtti -fno-exceptions... no
checking for cc option to produce PIC... -fPIC
checking if cc PIC flag -fPIC works... yes
checking if cc static flag -static works... yes
checking if cc supports -c -o file.o... yes
checking whether the cc linker (/usr/i586-suse-linux/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes


creating libtool
appending configuration tag "CXX" to libtool


Generating files
configure: creating ./config.status
creating main/internal_functions.c
creating main/internal_functions_cli.c
+--------------------------------------------------------------------+
| License:                                                           |
| This software is subject to the PHP License, available in this     |
| distribution in the file LICENSE.  By continuing this installation |
| process, you are bound by the terms of this license agreement.     |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point.                            |
+--------------------------------------------------------------------+


Thank you for using PHP.


config.status: creating php5.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: executing default commands

7.如果已经安装了apache等，这个也可以在php的 configure 上加上去。

8.make

make 只是bulid ，还没有在 “php要安装的目录” 安装php，所以需要在make 之后再使用make install 来安装php

make之后会出现相似的提示：

9.make install

make install 会出现这样的提示：

Installing shared extensions:     /data/xingzheng/install/php-5.5.10/lib/php/extensions/no-debug-non-zts-20121212/
Installing PHP CLI binary:        /data/xingzheng/install/php-5.5.10/bin/
Installing PHP CLI man page:      /data/xingzheng/install/php-5.5.10/php/man/man1/
Installing PHP CGI binary:        /data/xingzheng/install/php-5.5.10/bin/
Installing PHP CGI man page:      /data/xingzheng/install/php-5.5.10/php/man/man1/
Installing build environment:     /data/xingzheng/install/php-5.5.10/lib/php/build/
Installing header files:          /data/xingzheng/install/php-5.5.10/include/php/
Installing helper programs:       /data/xingzheng/install/php-5.5.10/bin/
  program: phpize
  program: php-config
Installing man pages:             /data/xingzheng/install/php-5.5.10/php/man/man1/
  page: phpize.1
  page: php-config.1
Installing PEAR environment:      /data/xingzheng/install/php-5.5.10/lib/php/
[PEAR] Archive_Tar    - installed: 1.3.11
[PEAR] Console_Getopt - installed: 1.3.1
warning: pear/PEAR requires package "pear/Structures_Graph" (recommended version 1.0.4)
warning: pear/PEAR requires package "pear/XML_Util" (recommended version 1.2.1)
[PEAR] PEAR           - installed: 1.9.4
Wrote PEAR system config file at: /data/xingzheng/install/php-5.5.10/etc/pear.conf
You may want to add: /data/xingzheng/install/php-5.5.10/lib/php to your php.ini include_path
[PEAR] Structures_Graph- installed: 1.0.4
[PEAR] XML_Util       - installed: 1.2.1
/data/xingzheng/software/php-5.5.10/build/shtool install -c ext/phar/phar.phar /data/xingzheng/install/php-5.5.10/bin
ln -s -f /data/xingzheng/install/php-5.5.10/bin/phar.phar /data/xingzheng/install/php-5.5.10/bin/phar
Installing PDO headers:          /data/xingzheng/install/php-5.5.10/include/php/ext/pdo/

10.顺便说下，php的配置文件php.ini  这个默认安装是没有这个文件的，需要从php 源代码目录下，将 php.ini-development 或者php.ini-production复制到对应的 php.ini的目录下。一般来将默认的 php.ini 文件会在 php安装目录下的lib 目录下，如何安装目录是 /data/test/php 那么php.ini 的目录会是 /data/test/php/lib 。php.ini的目录可以通过phpinfo() 来看的。 直接 ./php -r "echo phpinfo();"  就可以看到。

附录 configure 选项：

`configure' configures this package to adapt to many kinds of systems.


Usage: ./configure [OPTION]... [VAR=VALUE]...


To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE.  See below for descriptions of some of the useful variables.


Defaults for the options are specified in brackets.


Configuration:
  -h, --help              display this help and exit
      --help=short        display options specific to this package
      --help=recursive    display the short help of all the included packages
  -V, --version           display version information and exit
  -q, --quiet, --silent   do not print `checking ...' messages
      --cache-file=FILE   cache test results in FILE [disabled]
  -C, --config-cache      alias for `--cache-file=config.cache'
  -n, --no-create         do not create output files
      --srcdir=DIR        find the sources in DIR [configure dir or `..']


Installation directories:
  --prefix=PREFIX         install architecture-independent files in PREFIX
                          [/usr/local]
  --exec-prefix=EPREFIX   install architecture-dependent files in EPREFIX
                          [PREFIX]


By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc.  You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.


For better control, use the options below.


Fine tuning of the installation directories:
  --bindir=DIR            user executables [EPREFIX/bin]
  --sbindir=DIR           system admin executables [EPREFIX/sbin]
  --libexecdir=DIR        program executables [EPREFIX/libexec]
  --sysconfdir=DIR        read-only single-machine data [PREFIX/etc]
  --sharedstatedir=DIR    modifiable architecture-independent data [PREFIX/com]
  --localstatedir=DIR     modifiable single-machine data [PREFIX/var]
  --libdir=DIR            object code libraries [EPREFIX/lib]
  --includedir=DIR        C header files [PREFIX/include]
  --oldincludedir=DIR     C header files for non-gcc [/usr/include]
  --datarootdir=DIR       read-only arch.-independent data root [PREFIX/share]
  --datadir=DIR           read-only architecture-independent data [DATAROOTDIR]
  --infodir=DIR           info documentation [DATAROOTDIR/info]
  --localedir=DIR         locale-dependent data [DATAROOTDIR/locale]
  --mandir=DIR            man documentation [DATAROOTDIR/man]
  --docdir=DIR            documentation root [DATAROOTDIR/doc/PACKAGE]
  --htmldir=DIR           html documentation [DOCDIR]
  --dvidir=DIR            dvi documentation [DOCDIR]
  --pdfdir=DIR            pdf documentation [DOCDIR]
  --psdir=DIR             ps documentation [DOCDIR]


System types:
  --build=BUILD     configure for building on BUILD [guessed]
  --host=HOST       cross-compile to build programs to run on HOST [BUILD]
  --target=TARGET   configure for building compilers for TARGET [HOST]


Optional Features and Packages:
  --disable-option-checking  ignore unrecognized --enable/--with options
  --disable-FEATURE       do not include FEATURE (same as --enable-FEATURE=no)
  --enable-FEATURE[=ARG]  include FEATURE [ARG=yes]
  --with-PACKAGE[=ARG]    use PACKAGE [ARG=yes]
  --without-PACKAGE       do not use PACKAGE (same as --with-PACKAGE=no)
  --with-libdir=NAME      Look for libraries in .../NAME rather than .../lib
  --disable-rpath         Disable passing additional runtime library
                          search paths
  --enable-re2c-cgoto     Enable -g flag to re2c to use computed goto gcc extension


SAPI modules:


  --with-aolserver=DIR    Specify path to the installed AOLserver
  --with-apxs=FILE        Build shared Apache 1.x module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --with-apache=DIR       Build Apache 1.x module. DIR is the top-level Apache
                          build directory /usr/local/apache
  --enable-mod-charset    APACHE: Enable transfer tables for mod_charset (Rus Apache)
  --with-apxs2filter=FILE
                          EXPERIMENTAL: Build shared Apache 2.0 Filter module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --with-apxs2=FILE       Build shared Apache 2.0 Handler module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --with-apache-hooks=FILE
                          EXPERIMENTAL: Build shared Apache 1.x module. FILE is the optional
                          pathname to the Apache apxs tool apxs
  --with-apache-hooks-static=DIR
                          EXPERIMENTAL: Build Apache 1.x module. DIR is the top-level Apache
                          build directory /usr/local/apache
  --enable-mod-charset    APACHE (hooks): Enable transfer tables for mod_charset (Rus Apache)
  --with-caudium=DIR      Build PHP as a Pike module for use with Caudium.
                          DIR is the Caudium server dir /usr/local/caudium/server
  --disable-cli           Disable building CLI version of PHP
                          (this forces --without-pear)
  --with-continuity=DIR   Build PHP as Continuity Server module.
                          DIR is path to the installed Continuity Server root
  --enable-embed=TYPE     EXPERIMENTAL: Enable building of embedded SAPI library
                          TYPE is either 'shared' or 'static'. TYPE=shared
  --enable-fpm            Enable building of the fpm SAPI executable
  --with-fpm-user=USER    Set the user for php-fpm to run as. (default: nobody)
  --with-fpm-group=GRP    Set the group for php-fpm to run as. For a system user, this
                          should usually be set to match the fpm username (default: nobody)
  --with-fpm-systemd      Activate systemd integration
  --with-isapi=DIR        Build PHP as an ISAPI module for use with Zeus
  --with-litespeed        Build PHP as litespeed module
  --with-milter=DIR       Build PHP as Milter application
  --with-nsapi=DIR        Build PHP as NSAPI module for Netscape/iPlanet/Sun Webserver
  --with-phttpd=DIR       Build PHP as phttpd module
  --with-pi3web=DIR       Build PHP as Pi3Web module
  --with-roxen=DIR        Build PHP as a Pike module. DIR is the base Roxen
                          directory, normally /usr/local/roxen/server
  --enable-roxen-zts      ROXEN: Build the Roxen module using Zend Thread Safety
  --with-thttpd=SRCDIR    Build PHP as thttpd module
  --with-tux=MODULEDIR    Build PHP as a TUX module (Linux only)
  --with-webjames=SRCDIR  Build PHP as a WebJames module (RISC OS only)
  --disable-cgi           Disable building CGI version of PHP


General settings:


  --enable-gcov           Enable GCOV code coverage (requires LTP) - FOR DEVELOPERS ONLY!!
  --enable-debug          Compile with debugging symbols
  --with-layout=TYPE      Set how installed files will be laid out.  Type can
                          be either PHP or GNU [PHP]
  --with-config-file-path=PATH
                          Set the path in which to look for php.ini [PREFIX/lib]
  --with-config-file-scan-dir=PATH
                          Set the path where to scan for configuration files
  --enable-sigchild       Enable PHP's own SIGCHLD handler
  --enable-libgcc         Enable explicitly linking against libgcc
  --disable-short-tags    Disable the short-form <? start tag by default
  --enable-dmalloc        Enable dmalloc
  --disable-ipv6          Disable IPv6 support
  --enable-dtrace         Enable DTrace support
  --enable-fd-setsize     Set size of descriptor sets


Extensions:


  --with-EXTENSION=shared[,PATH]


    NOTE: Not all extensions can be build as 'shared'.


    Example: --with-foobar=shared,/usr/local/foobar/


      o Builds the foobar extension as shared extension.
      o foobar package install prefix is /usr/local/foobar/




  --disable-all           Disable all extensions which are enabled by default


  --with-regex=TYPE       Regex library type: system, php. TYPE=php
                          WARNING: Do NOT use unless you know what you are doing!
  --disable-libxml        Disable LIBXML support
  --with-libxml-dir=DIR   LIBXML: libxml2 install prefix
  --with-openssl=DIR      Include OpenSSL support (requires OpenSSL >= 0.9.6)
  --with-kerberos=DIR     OPENSSL: Include Kerberos support
  --with-pcre-regex=DIR   Include Perl Compatible Regular Expressions support.
                          DIR is the PCRE install prefix BUNDLED
  --without-sqlite3=DIR   Do not include SQLite3 support. DIR is the prefix to
                          SQLite3 installation directory.
  --with-zlib=DIR         Include ZLIB support (requires zlib >= 1.0.9)
  --with-zlib-dir=<DIR>   Define the location of zlib install directory
  --enable-bcmath         Enable bc style precision math functions
  --with-bz2=DIR          Include BZip2 support
  --enable-calendar       Enable support for calendar conversion
  --disable-ctype         Disable ctype functions
  --with-curl=DIR         Include cURL support
  --enable-dba            Build DBA with bundled modules. To build shared DBA
                          extension use --enable-dba=shared
  --with-qdbm=DIR         DBA: QDBM support
  --with-gdbm=DIR         DBA: GDBM support
  --with-ndbm=DIR         DBA: NDBM support
  --with-db4=DIR          DBA: Oracle Berkeley DB 4.x or 5.x support
  --with-db3=DIR          DBA: Oracle Berkeley DB 3.x support
  --with-db2=DIR          DBA: Oracle Berkeley DB 2.x support
  --with-db1=DIR          DBA: Oracle Berkeley DB 1.x support/emulation
  --with-dbm=DIR          DBA: DBM support
  --with-tcadb=DIR        DBA: Tokyo Cabinet abstract DB support
  --without-cdb=DIR       DBA: CDB support (bundled)
  --disable-inifile       DBA: INI support (bundled)
  --disable-flatfile      DBA: FlatFile support (bundled)
  --disable-dom           Disable DOM support
  --with-libxml-dir=DIR   DOM: libxml2 install prefix
  --with-enchant=DIR      Include enchant support.
                          GNU Aspell version 1.1.3 or higher required.
  --enable-exif           Enable EXIF (metadata from images) support
  --disable-fileinfo      Disable fileinfo support
  --disable-filter        Disable input filter support
  --with-pcre-dir         FILTER: pcre install prefix
  --enable-ftp            Enable FTP support
  --with-openssl-dir=DIR  FTP: openssl install prefix
  --with-gd=DIR           Include GD support.  DIR is the GD library base
                          install directory BUNDLED
  --with-vpx-dir=DIR      GD: Set the path to libvpx install prefix
  --with-jpeg-dir=DIR     GD: Set the path to libjpeg install prefix
  --with-png-dir=DIR      GD: Set the path to libpng install prefix
  --with-zlib-dir=DIR     GD: Set the path to libz install prefix
  --with-xpm-dir=DIR      GD: Set the path to libXpm install prefix
  --with-freetype-dir=DIR GD: Set the path to FreeType 2 install prefix
  --with-t1lib=DIR        GD: Include T1lib support. T1lib version >= 5.0.0 required
  --enable-gd-native-ttf  GD: Enable TrueType string function
  --enable-gd-jis-conv    GD: Enable JIS-mapped Japanese font support
  --with-gettext=DIR      Include GNU gettext support
  --with-gmp=DIR          Include GNU MP support
  --with-mhash=DIR        Include mhash support
  --disable-hash          Disable hash support
  --without-iconv=DIR     Exclude iconv support
  --with-imap=DIR         Include IMAP support. DIR is the c-client install prefix
  --with-kerberos=DIR     IMAP: Include Kerberos support. DIR is the Kerberos install prefix
  --with-imap-ssl=DIR     IMAP: Include SSL support. DIR is the OpenSSL install prefix
  --with-interbase=DIR    Include InterBase support.  DIR is the InterBase base
                          install directory /usr/interbase
  --enable-intl           Enable internationalization support
  --with-icu-dir=DIR      Specify where ICU libraries and headers can be found
  --disable-json          Disable JavaScript Object Serialization support
  --with-ldap=DIR         Include LDAP support
  --with-ldap-sasl=DIR    LDAP: Include Cyrus SASL support
  --enable-mbstring       Enable multibyte string support
  --disable-mbregex       MBSTRING: Disable multibyte regex support
  --disable-mbregex-backtrack
                          MBSTRING: Disable multibyte regex backtrack check
  --with-libmbfl=DIR      MBSTRING: Use external libmbfl.  DIR is the libmbfl base
                          install directory BUNDLED
  --with-onig=DIR         MBSTRING: Use external oniguruma. DIR is the oniguruma install prefix.
                          If DIR is not set, the bundled oniguruma will be used
  --with-mcrypt=DIR       Include mcrypt support
  --with-mssql=DIR        Include MSSQL-DB support.  DIR is the FreeTDS home
                          directory /usr/local/freetds
  --with-mysql=DIR        Include MySQL support.  DIR is the MySQL base
                          directory, if no DIR is passed or the value is
                          mysqlnd the MySQL native driver will be used
  --with-mysql-sock=SOCKPATH
                          MySQL/MySQLi/PDO_MYSQL: Location of the MySQL unix socket pointer.
                          If unspecified, the default locations are searched
  --with-zlib-dir=DIR     MySQL: Set the path to libz install prefix
  --with-mysqli=FILE      Include MySQLi support.  FILE is the path
                          to mysql_config.  If no value or mysqlnd is passed
                          as FILE, the MySQL native driver will be used
  --enable-embedded-mysqli
                          MYSQLi: Enable embedded support
                          Note: Does not work with MySQL native driver!
  --with-oci8=DIR         Include Oracle Database OCI8 support. DIR defaults to \$ORACLE_HOME.
                          Use --with-oci8=instantclient,/path/to/instant/client/lib
                          to use an Oracle Instant Client installation
  --with-adabas=DIR       Include Adabas D support /usr/local
  --with-sapdb=DIR        Include SAP DB support /usr/local
  --with-solid=DIR        Include Solid support /usr/local/solid
  --with-ibm-db2=DIR      Include IBM DB2 support /home/db2inst1/sqllib
  --with-ODBCRouter=DIR   Include ODBCRouter.com support /usr
  --with-empress=DIR      Include Empress support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-empress-bcs=DIR
                          Include Empress Local Access support \$EMPRESSPATH
                          (Empress Version >= 8.60 required)
  --with-birdstep=DIR     Include Birdstep support /usr/local/birdstep
  --with-custom-odbc=DIR  Include user defined ODBC support. DIR is ODBC install base
                          directory /usr/local. Make sure to define CUSTOM_ODBC_LIBS and
                          have some odbc.h in your include dirs. f.e. you should define
                          following for Sybase SQL Anywhere 5.5.00 on QNX, prior to
                          running this configure script:
                            CPPFLAGS=\"-DODBC_QNX -DSQLANY_BUG\"
                            LDFLAGS=-lunix
                            CUSTOM_ODBC_LIBS=\"-ldblib -lodbc\"
  --with-iodbc=DIR        Include iODBC support /usr/local
  --with-esoob=DIR        Include Easysoft OOB support /usr/local/easysoft/oob/client
  --with-unixODBC=DIR     Include unixODBC support /usr/local
  --with-dbmaker=DIR      Include DBMaker support
  --enable-opcache        Enable Zend OPcache support
  --enable-pcntl          Enable pcntl support (CLI/CGI only)
  --disable-pdo           Disable PHP Data Objects support
  --with-pdo-dblib=DIR    PDO: DBLIB-DB support.  DIR is the FreeTDS home directory
  --with-pdo-firebird=DIR PDO: Firebird support.  DIR is the Firebird base
                          install directory /opt/firebird
  --with-pdo-mysql=DIR    PDO: MySQL support. DIR is the MySQL base directory
                          If no value or mysqlnd is passed as DIR, the
                          MySQL native driver will be used
  --with-zlib-dir=DIR     PDO_MySQL: Set the path to libz install prefix
  --with-pdo-oci=DIR      PDO: Oracle OCI support. DIR defaults to \$ORACLE_HOME.
                          Use --with-pdo-oci=instantclient,prefix,version
                          for an Oracle Instant Client SDK.
                          For example on Linux with 11.2 RPMs use:
                            --with-pdo-oci=instantclient,/usr,11.2
                          With 10.2 RPMs use:
                            --with-pdo-oci=instantclient,/usr,10.2.0.4
  --with-pdo-odbc=flavour,dir
                          PDO: Support for 'flavour' ODBC driver.
                          include and lib dirs are looked for under 'dir'.


                          'flavour' can be one of:  ibm-db2, iODBC, unixODBC, generic
                          If ',dir' part is omitted, default for the flavour
                          you have selected will be used. e.g.:


                            --with-pdo-odbc=unixODBC


                          will check for unixODBC under /usr/local. You may attempt
                          to use an otherwise unsupported driver using the \"generic\"
                          flavour.  The syntax for generic ODBC support is:


                            --with-pdo-odbc=generic,dir,libname,ldflags,cflags


                          When built as 'shared' the extension filename is always pdo_odbc.so
  --with-pdo-pgsql=DIR    PDO: PostgreSQL support.  DIR is the PostgreSQL base
                          install directory or the path to pg_config
  --without-pdo-sqlite=DIR
                          PDO: sqlite 3 support.  DIR is the sqlite base
                          install directory BUNDLED
  --with-pgsql=DIR        Include PostgreSQL support.  DIR is the PostgreSQL
                          base install directory or the path to pg_config
  --disable-phar          Disable phar support
  --disable-posix         Disable POSIX-like functions
  --with-pspell=DIR       Include PSPELL support.
                          GNU Aspell version 0.50.0 or higher required
  --with-libedit=DIR      Include libedit readline replacement (CLI/CGI only)
  --with-readline=DIR     Include readline support (CLI/CGI only)
  --with-recode=DIR       Include recode support
  --disable-session       Disable session support
  --with-mm=DIR           SESSION: Include mm support for session storage
  --enable-shmop          Enable shmop support
  --disable-simplexml     Disable SimpleXML support
  --with-libxml-dir=DIR   SimpleXML: libxml2 install prefix
  --with-snmp=DIR         Include SNMP support
  --with-openssl-dir=DIR  SNMP: openssl install prefix
  --enable-soap           Enable SOAP support
  --with-libxml-dir=DIR   SOAP: libxml2 install prefix
  --enable-sockets        Enable sockets support
  --with-sybase-ct=DIR    Include Sybase-CT support.  DIR is the Sybase home
                          directory /home/sybase
  --enable-sysvmsg        Enable sysvmsg support
  --enable-sysvsem        Enable System V semaphore support
  --enable-sysvshm        Enable the System V shared memory support
  --with-tidy=DIR         Include TIDY support
  --disable-tokenizer     Disable tokenizer support
  --enable-wddx           Enable WDDX support
  --with-libxml-dir=DIR   WDDX: libxml2 install prefix
  --with-libexpat-dir=DIR WDDX: libexpat dir for XMLRPC-EPI (deprecated)
  --disable-xml           Disable XML support
  --with-libxml-dir=DIR   XML: libxml2 install prefix
  --with-libexpat-dir=DIR XML: libexpat install prefix (deprecated)
  --disable-xmlreader     Disable XMLReader support
  --with-libxml-dir=DIR   XMLReader: libxml2 install prefix
  --with-xmlrpc=DIR       Include XMLRPC-EPI support
  --with-libxml-dir=DIR   XMLRPC-EPI: libxml2 install prefix
  --with-libexpat-dir=DIR XMLRPC-EPI: libexpat dir for XMLRPC-EPI (deprecated)
  --with-iconv-dir=DIR    XMLRPC-EPI: iconv dir for XMLRPC-EPI
  --disable-xmlwriter     Disable XMLWriter support
  --with-libxml-dir=DIR   XMLWriter: libxml2 install prefix
  --with-xsl=DIR          Include XSL support.  DIR is the libxslt base
                          install directory (libxslt >= 1.1.0 required)
  --enable-zip            Include Zip read/write support
  --with-zlib-dir=DIR     ZIP: Set the path to libz install prefix
  --with-pcre-dir         ZIP: pcre install prefix
  --enable-mysqlnd        Enable mysqlnd explicitly, will be done implicitly
                          when required by other extensions
  --disable-mysqlnd-compression-support
                          Disable support for the MySQL compressed protocol in mysqlnd
  --with-zlib-dir=DIR     mysqlnd: Set the path to libz install prefix


PEAR:


  --with-pear=DIR         Install PEAR in DIR [PREFIX/lib/php]
  --without-pear          Do not install PEAR


Zend:


  --with-zend-vm=TYPE     Set virtual machine dispatch method. Type is
                          one of "CALL", "SWITCH" or "GOTO" TYPE=CALL
  --enable-maintainer-zts Enable thread safety - for code maintainers only!!
  --disable-inline-optimization
                          If building zend_execute.lo fails, try this switch
  --enable-zend-signals   Use zend signal handling


TSRM:


  --with-tsrm-pth=pth-config
                          Use GNU Pth
  --with-tsrm-st          Use SGI's State Threads
  --with-tsrm-pthreads    Use POSIX threads (default)


Libtool:


  --enable-shared=PKGS    Build shared libraries default=yes
  --enable-static=PKGS    Build static libraries default=yes
  --enable-fast-install=PKGS
                          Optimize for fast installation default=yes
  --with-gnu-ld           Assume the C compiler uses GNU ld default=no
  --disable-libtool-lock  Avoid locking (might break parallel builds)
  --with-pic              Try to use only PIC/non-PIC objects default=use both
  --with-tags=TAGS        Include additional configurations automatic




Some influential environment variables:
  CC          C compiler command
  CFLAGS      C compiler flags
  LDFLAGS     linker flags, e.g. -L<lib dir> if you have libraries in a
              nonstandard directory <lib dir>
  LIBS        libraries to pass to the linker, e.g. -l<library>
  CPPFLAGS    (Objective) C/C++ preprocessor flags, e.g. -I<include dir> if
              you have headers in a nonstandard directory <include dir>
  CPP         C preprocessor
  YACC        The `Yet Another Compiler Compiler' implementation to use.
              Defaults to the first program found out of: `bison -y', `byacc',
              `yacc'.
  YFLAGS      The list of arguments that will be passed by default to $YACC.
              This script will default YFLAGS to the empty string to avoid a
              default value of `-d' given by some make applications.
  CXX         C++ compiler command
  CXXFLAGS    C++ compiler flags
  CXXCPP      C++ preprocessor


Use these variables to override the choices made by `configure' or to help
it to find libraries and programs with nonstandard names/locations.


Report bugs to the package provider.