k8s二进制部署v1.22.1

k8s

alucardXXOO

999人浏览 · 2021-09-12 20:31:12

alucardXXOO · 2021-09-12 20:31:12 发布

k8s v1.22.1二进制部署

1 环境准备

1.1 主机规划

IP地址	主机名	角色	软件
192.168.100.201	m-1	master	kube-apiserver、kube-controller-manager、kube-scheduler
192.168.100.202	m-2	master	kube-apiserver、kube-controller-manager、kube-scheduler
192.168.100.203	m-3	master	kube-apiserver、kube-controller-manager、kube-scheduler
192.168.100.211	n-1	node	kubelet、kube-proxy
192.168.100.212	n-2	node	kubelet、kube-proxy
192.168.100.200	/	vip	/

1.2 软件版本

软件	版本
debian	11
etcd	3.5.0
calico	3.20
coredns	1.8.4
docker	20.10.8

1.3 网络规划

名称	网段
host	192.168.100.0/24
service	20.0.0.0/16
pod	10.0.0.0/16

2 集群初始

2.1 hostname

#m-1
hostnamectl --static set-hostname m-1
#m-2
hostnamectl --static set-hostname m-2
#m-3
hostnamectl --static set-hostname m-3
#n-1
hostnamectl --static set-hostname n-1
#n-2
hostnamectl --static set-hostname n-2

2.2 hosts

#m-1 m-2 m-3 n-1 n-2
cp /etc/hosts{,.bak}
cat >> /etc/hosts << EOF
192.168.100.201 m-1
192.168.100.202 m-2
192.168.100.203 m-3
192.168.100.211 n-1
192.168.100.212 n-2
EOF

2.3 swapoff

#m-1 m-2 m-3 n-1 n-2
mkdir /opt/script

cat > /opt/script/swap-off.sh << EOF
#!/bin/bash
set -ex
case \$1 in
start)
    swapoff -a
    ;;
stop)
    swapon -a
    ;;
*)
    swapoff -a
    ;;
esac
EOF

chmod +x /opt/script/swap-off.sh

cat >> /usr/lib/systemd/system/swap-off.service << EOF
[Unit]
Description=swap off
After=networking.service

[Service]
Type=oneshot
RemainAfterExit=true
ExecStart=/opt/script/swap-off.sh start
ExecStop=/opt/script/swap-off.sh stop

[Install]
WantedBy=multi-user.target
EOF

systemctl daemon-reload
systemctl enable --now swap-off.service
systemctl status swap-off.service

2.4 chrony

#m-1 m-2 m-3 n-1 n-2
apt install -y chrony

#m-1 m-2 m-3
sed -i 's/pool.*/pool\ ntp\.aliyun\.com\ iburst/g' /etc/chrony/chrony.conf
sed -i '/aliyun/a allow\ 192\.168\.100\.0\/24' /etc/chrony/chrony.conf
sed -i '/allow/a local\ stratum\ 10' /etc/chrony/chrony.conf

#n-1 n-2
cp /etc/chrony/chrony.conf{,.bak}
sed -i 's/pool.*/pool\ m-1\ iburst/g' /etc/chrony/chrony.conf
sed -i '/m-1/a pool\ m-2\ iburst' /etc/chrony/chrony.conf
sed -i '/m-2/a pool\ m-3\ iburst' /etc/chrony/chrony.conf

#m-1 m-2 m-3 n-1 n-2
systemctl restart chrony.service
systemctl enable --now chrony.service
systemctl status chrony.service

##m-1 m-2 m-3 n-1 n-2
chronyc sources -v

2.5 limits

#m-1 m-2 m-3 n-1 n-2
cat >> /etc/security/limits.conf << EOF
root soft nofile 655350
root hard nofile 655350
root soft nproc 655350
root hard nproc 655350
root soft memlock unlimited
root hard memlock unlimited
* soft nofile 655350
* hard nofile 655350
* soft nproc 655350
* hard nproc 655350
* soft memlock unlimited
* hard memlock unlimited
EOF

2.6 ipvs

#m-1 m-2 m-3 n-1 n-2
apt install -y ipvsadm ipset sysstat conntrack

#m-1 m-2 m-3 n-1 n-2
cat > /etc/modules-load.d/ipvs.conf << EOF
module=(
ip_vs
ip_vs_lc
ip_vs_wlc
ip_vs_rr
ip_vs_wrr
ip_vs_lblc
ip_vs_lblcr
ip_vs_dh
ip_vs_sh
ip_vs_fo
ip_vs_nq
ip_vs_sed
ip_vs_ftp
ip_tables
ip_set
xt_set
ipt_set
ipt_rpfilter
ipt_REJECT
ipip
nf_conntrack
br_netfilter
)
EOF
systemctl restart --now systemd-modules-load.service
systemctl enable --now systemd-modules-load.service
lsmod | grep -e ip_vs -e nf_conntrack

2.7 sysctl

#m-1 m-2 m-3 n-1 n-2
cat > /etc/sysctl.d/k8s.conf << EOF 
net.ipv4.ip_forward = 1
net.bridge.bridge-nf-call-iptables = 1
net.bridge.bridge-nf-call-ip6tables = 1
fs.may_detach_mounts = 1
vm.overcommit_memory=1
vm.panic_on_oom=0
fs.inotify.max_user_watches=89100
fs.file-max=52706963
fs.nr_open=52706963
net.netfilter.nf_conntrack_max=2310720

net.ipv4.tcp_keepalive_time = 600
net.ipv4.tcp_keepalive_probes = 3
net.ipv4.tcp_keepalive_intvl =15
net.ipv4.tcp_max_tw_buckets = 36000
net.ipv4.tcp_tw_reuse = 1
net.ipv4.tcp_max_orphans = 327680
net.ipv4.tcp_orphan_retries = 3
net.ipv4.tcp_syncookies = 1
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.ip_conntrack_max = 131072
net.ipv4.tcp_max_syn_backlog = 16384
net.ipv4.tcp_timestamps = 0
net.core.somaxconn = 16384
EOF

sysctl -p /etc/sysctl.d/k8s.conf
sysctl --system

lsmod | grep --color=auto -e ip_vs -e nf_conntrack

2.8 ssh

#m-1 m-2 m-3 n-1 n-2
ssh-keygen -t rsa -P "" -f ~/.ssh/id_rsa

apt install -y sshpass

user="root"
password="debian"
for ip in m-1 m-2 m-3 n-1 n-2; do
  sshpass -p $password ssh-copy-id -i ~/.ssh/id_rsa.pub -o StrictHostKeyChecking=no $user@$ip;
done

2.9 sources

mv /etc/apt/sources.list{,.bak}
cat > /etc/apt/sources.list <<EOF
deb http://mirrors.aliyun.com/debian/ bullseye main
deb-src http://mirrors.aliyun.com/debian/ bullseye main

deb http://mirrors.aliyun.com/debian-security/ bullseye-security main
deb-src http://mirrors.aliyun.com/debian-security/ bullseye-security main

deb http://mirrors.aliyun.com/debian/ bullseye-updates main
deb-src http://mirrors.aliyun.com/debian/ bullseye-updates main
EOF

apt update
apt upgrade

3 高可用

3.1 haproxy

#m-1 m-2 m-3
apt install -y haproxy

cat > /etc/haproxy/haproxy.cfg << EOF
global
    log             /dev/log local2
    chroot          /var/lib/haproxy
    pidfile         /var/run/haproxy.pid
    maxconn         4000
    user            haproxy
    group           haproxy
    daemon

defaults
    log             global
    mode            http
    option          httplog
    timeout         connect         5000
    timeout         client          50000
    timeout         server          50000
    timeout         http-request    15s
    timeout         http-keep-alive 15s

frontend k8s-api
    bind            *:16443
    mode            tcp
    option          tcplog
    default_backend k8s-api

backend k8s-api
    mode            tcp
    option          tcplog
    option          tcp-check
    balance         roundrobin
    default-server  inter 10s downinter 5s rise 2 fall 2 slowstart 60s maxconn 250 maxqueue 256 weight 100
    server          master1 192.168.100.201:6443 check
    server          master2 192.168.100.202:6443 check
    server          master3 192.168.100.203:6443 check

listen stats
    bind            *:9000
    mode            http
    stats           enable
    stats           hide-version
    stats           uri       /stats
    stats           refresh   30s
    stats           realm     Haproxy\ Statistics
    stats           auth      admin:password
EOF

systemctl restart haproxy
systemctl enable --now haproxy
systemctl status haproxy

3.2 keepalived

#m-1 m-2 m-3
apt install -y keepalived

#检测脚本
cat > /etc/keepalived/check_haproxy.sh << EOF
#!/bin/sh
if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ]; then
	systemctl restart haproxy
fi
    sleep 2
if [ $(ps -C haproxy --no-header | wc -l) -eq 0 ]; then
	killall keepalived
fi
EOF
chmod +x /etc/keepalived/check_haproxy.sh

#m-1
cat << EOF > /etc/keepalived/keepalived.conf
global_defs {
   router_id LVS_1
   script_user root
   enable_script_security 
}
vrrp_script check_haproxy {
   script "/etc/keepalived/check_haproxy.sh"
   interval 5
   weight -10
   fall 2 
   rise 1
}

vrrp_instance VI_1 {
    state MASTER
    interface ens33
    virtual_router_id 100
    priority 100
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass k8s
    }
    virtual_ipaddress {
        192.168.100.200/24
    }
    track_script {
        check_haproxy
  }
}
EOF

#m-2
cat << EOF > /etc/keepalived/keepalived.conf
global_defs {
   router_id LVS_2
   script_user root
   enable_script_security 
}
vrrp_script check_haproxy {
   script "/etc/keepalived/check_haproxy.sh"
   interval 5
   weight -10
   fall 2 
   rise 1
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    virtual_router_id 100
    priority 95
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass k8s
    }
    virtual_ipaddress {
        192.168.100.200/24
    }
    track_script {
        check_haproxy
  }
}
EOF

#m-3
cat << EOF > /etc/keepalived/keepalived.conf
global_defs {
   router_id LVS_3
   script_user root
   enable_script_security 
}
vrrp_script check_haproxy {
   script "/etc/keepalived/check_haproxy.sh"
   interval 5
   weight -10
   fall 2 
   rise 1
}

vrrp_instance VI_1 {
    state BACKUP
    interface ens33
    virtual_router_id 100
    priority 90
    advert_int 1
    authentication {
        auth_type PASS
        auth_pass k8s
    }
    virtual_ipaddress {
        192.168.100.200/24
    }
    track_script {
        check_haproxy
  }
}
EOF

systemctl restart keepalived
systemctl enable --now keepalived
systemctl status keepalived

4 集群安装

4.1 docker

#m-1 m-2 m-3 n-1 n-2
#配置源
Sources_URL='http://mirrors.aliyun.com';echo -e "# deb-src [arch=amd64] ${Sources_URL}/docker-ce/linux/debian buster stable\ndeb [arch=amd64] ${Sources_URL}/docker-ce/linux/debian buster stable\n# deb-src [arch=amd64] ${Sources_URL}/docker-ce/linux/debian buster stable" > /etc/apt/sources.list.d/docker.list

#添加key
apt install -y gpg
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 7EA0A9C3F273FCD8
apt update
apt install -y docker-ce

#加速器
echo -e "{\n\t\"exec-opts\": [\"native.cgroupdriver=systemd\"],\n\t\"registry-mirrors\": [\"http://hub-mirror.c.163.com\"]\n}" > /etc/docker/daemon.json

#重载
systemctl daemon-reload
systemctl restart docker
systemctl enable --now docker
docker info

4.2 directory

#m-1 m-2 m-3 n-1 n-2
sed -i '/export/i PATH=$PATH:/opt/etcd/bin/:/opt/kubernetes/bin/' /etc/profile

#m-1 m-2 m-3
mkdir /opt/etcd/
mkdir /opt/etcd/bin/
mkdir /opt/etcd/cfssl/
mkdir /opt/etcd/pki/
mkdir /opt/etcd/ssl/
mkdir /opt/etcd/cfg/
mkdir /opt/etcd/default.etcd

mkdir /opt/kubernetes/
mkdir /opt/kubernetes/bin/
mkdir /opt/kubernetes/cfssl/
mkdir /opt/kubernetes/pki/
mkdir /opt/kubernetes/ssl/
mkdir /opt/kubernetes/cfg/
mkdir /opt/kubernetes/logs

4.2 cfssl

https://github.com/cloudflare/cfssl

#m-1
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl_1.6.1_linux_amd64
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssljson_1.6.1_linux_amd64
wget https://github.com/cloudflare/cfssl/releases/download/v1.6.1/cfssl-certinfo_1.6.1_linux_amd64

root@m-1:~/k8s# tree
.
└── soft
    ├── cfssl_1.6.1_linux_amd64
    ├── cfssl-certinfo_1.6.1_linux_amd64
    └── cfssljson_1.6.1_linux_amd64

cp soft/cfssl_1.6.1_linux_amd64 /usr/local/bin/cfssl
cp soft/cfssl-certinfo_1.6.1_linux_amd64 /usr/local/bin/cfssl-certinfo
cp soft/cfssljson_1.6.1_linux_amd64 /usr/local/bin/cfssljson
chmod +x /usr/local/bin/cfssl*

4.2 etcd

https://github.com/etcd-io/etcd

4.2.1 二进制下载

#m-1
wget https://github.com/etcd-io/etcd/releases/download/v3.5.0/etcd-v3.5.0-linux-amd64.tar.gz

root@m-1:~/k8s# tree
.
└── soft
    ├── cfssl_1.6.1_linux_amd64
    ├── cfssl-certinfo_1.6.1_linux_amd64
    ├── cfssljson_1.6.1_linux_amd64
    └── etcd-v3.5.0-linux-amd64.tar.gz

tar -xvf soft/etcd-v3.5.0-linux-amd64.tar.gz -C /opt/etcd/bin/ --strip-components 1 etcd-v3.5.0-linux-amd64/etcd etcd-v3.5.0-linux-amd64/etcdctl

for m in m-2 m-3; do
scp /opt/etcd/bin/* $m:/opt/etcd/bin/;
done

4.2.2 请求文件

cat > /opt/etcd/cfssl/ca-config.json << EOF
{
  "signing": {
    "default": {
      "expiry": "876000h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
            "signing",
            "key encipherment",
            "server auth",
            "client auth"
        ],
        "expiry": "876000h"
      }
    }
  }
}
EOF

cat > /opt/etcd/cfssl/etcd-ca-csr.json << EOF
{
  "CN": "etcd",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "etcd",
      "OU": "Etcd Security"
    }
  ],
  "ca": {
    "expiry": "876000h"
  }
}
EOF

cat > /opt/etcd/cfssl/etcd-csr.json << EOF
{
  "CN": "etcd",
  "hosts": [
    "192.168.100.201",
    "192.168.100.202",
    "192.168.100.203"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "etcd",
      "OU": "Etcd Security"
    }
  ]
}
EOF

4.2.3 生成证书

#m-1
cfssl gencert \
  -initca /opt/etcd/cfssl/etcd-ca-csr.json | cfssljson \
  -bare /opt/etcd/pki/ca

cfssl gencert \
  -ca=/opt/etcd/pki/ca.pem \
  -ca-key=/opt/etcd/pki/ca-key.pem \
  -config=/opt/etcd/cfssl/ca-config.json \
  -profile="kubernetes" /opt/etcd/cfssl/etcd-csr.json | cfssljson \
  -bare /opt/etcd/ssl/etcd

4.2.4 分发证书

for m in m-2 m-3; do
scp /opt/etcd/pki/* $m:/opt/etcd/pki/;
scp /opt/etcd/ssl/* $m:/opt/etcd/ssl;
done

4.2.5 配置文件

#m-1 m-2 m-3
lip=$(hostname -i)
lip1="192.168.100.201"
lip2="192.168.100.202"
lip3="192.168.100.203"
lnm=$(hostname)
lnm1="m-1"
lnm2="m-2"
lnm3="m-3"
cat > /opt/etcd/cfg/etcd.conf << EOF
#[Member]
ETCD_NAME="$lnm"
ETCD_DATA_DIR="/opt/etcd/default.etcd"
ETCD_LISTEN_PEER_URLS="https://$lip:2380"
ETCD_LISTEN_CLIENT_URLS="https://$lip:2379"
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="https://$lip:2380"
ETCD_ADVERTISE_CLIENT_URLS="https://$lip:2379"
ETCD_INITIAL_CLUSTER="$lnm1=https://$lip1:2380,$lnm2=https://$lip2:2380,$lnm3=https://$lip3:2380"
ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
ETCD_INITIAL_CLUSTER_STATE="new"
EOF

4.2.6 服务文件

#m-1 m-2 m-3
cat > /usr/lib/systemd/system/etcd.service << EOF
[Unit]
Description=Etcd Server
After=networking.target
After=network-online.target
Wants=network-online.target

[Service]
Type=notify
EnvironmentFile=/opt/etcd/cfg/etcd.conf
ExecStart=/opt/etcd/bin/etcd \\
  --cert-file=/opt/etcd/ssl/etcd.pem \\
  --key-file=/opt/etcd/ssl/etcd-key.pem \\
  --trusted-ca-file=/opt/etcd/pki/ca.pem \\
  --peer-cert-file=/opt/etcd/ssl/etcd.pem \\
  --peer-key-file=/opt/etcd/ssl/etcd-key.pem \\
  --peer-trusted-ca-file=/opt/etcd/pki/ca.pem \\
  --peer-client-cert-auth \\
  --client-cert-auth

Restart=on-failure
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

4.2.7 启动验证

#m-1 m-2 m-3
systemctl daemon-reload
systemctl enable --now etcd
systemctl status etcd

lip1="192.168.100.201"
lip2="192.168.100.202"
lip3="192.168.100.203"
ETCDCTL_API=3 etcdctl --write-out=table --cacert=/opt/etcd/pki/ca.pem --cert=/opt/etcd/ssl/etcd.pem --key=/opt/etcd/ssl/etcd-key.pem --endpoints=https://$lip1:2379,https://$lip2:2379,https://$lip3:2379 endpoint health
ETCDCTL_API=3 etcdctl --write-out=table --cacert=/opt/etcd/pki/ca.pem --cert=/opt/etcd/ssl/etcd.pem --key=/opt/etcd/ssl/etcd-key.pem --endpoints=https://$lip1:2379,https://$lip2:2379,https://$lip3:2379 member list
ETCDCTL_API=3 etcdctl --write-out=table --cacert=/opt/etcd/pki/ca.pem --cert=/opt/etcd/ssl/etcd.pem --key=/opt/etcd/ssl/etcd-key.pem --endpoints=https://$lip1:2379,https://$lip2:2379,https://$lip3:2379 endpoint status

4.3 k8s

4.3.1 二进制下载

#m-1
wget https://storage.googleapis.com/kubernetes-release/release/v1.22.1/kubernetes-server-linux-amd64.tar.gz

root@m-1:~# tree
.
└── k8s
    └── soft
        ├── cfssl_1.6.1_linux_amd64
        ├── cfssl-certinfo_1.6.1_linux_amd64
        ├── cfssljson_1.6.1_linux_amd64
        ├── etcd-v3.5.0-linux-amd64.tar.gz
        └── kubernetes-server-linux-amd64.tar.gz
        
tar -xvf soft/kubernetes-server-linux-amd64.tar.gz -C /opt/kubernetes/bin/ --strip-components 3 kubernetes/server/bin/{kube-apiserver,kube-controller-manager,kubectl,kubelet,kube-proxy,kube-scheduler}

for m in m-2 m-3; do
scp /opt/kubernetes/bin/{kube-apiserver,kube-controller-manager,kubectl,kube-scheduler} $m:/opt/kubernetes/bin/;
done
for m in n-1 n-2; do
scp /opt/kubernetes/bin/{kubelet,kube-proxy} $m:/opt/kubernetes/bin/;
done

4.3.2 根证书

4.3.2.1 请求文件

#m-1
#ca
cat > /opt/kubernetes/cfssl/ca-config.json << EOF
{
  "signing": {
    "default": {
      "expiry": "876000h"
    },
    "profiles": {
      "kubernetes": {
        "usages": [
          "signing",
          "key encipherment",
          "server auth",
          "client auth"
        ],
        "expiry": "876000h"
      }
    }
  }
}
EOF

cat > /opt/kubernetes/cfssl/ca-csr.json << EOF
{
  "CN": "kubernetes",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "k8s",
      "OU": "System"
    }
  ],
  "ca": {
    "expiry": "876000h"
  }
}
EOF

#front-proxy
cat > /opt/kubernetes/cfssl/front-proxy-ca-csr.json << EOF
{
  "CN": "kubernetes",
  "key": {
     "algo": "rsa",
     "size": 2048
  }
}

4.3.2.2 生成证书

#m-1
#ca
cfssl gencert \
  -initca /opt/kubernetes/cfssl/ca-csr.json | cfssljson \
  -bare /opt/kubernetes/pki/ca

#front-proxy
cfssl gencert \
  -initca /opt/kubernetes/cfssl/front-proxy-ca-csr.json | cfssljson \
  --bare /opt/kubernetes/pki/front-proxy-ca

4.3.2.3 分发证书

for m in m-2 m-3 n-1 n-2; do
scp /opt/kubernetes/pki/ca* $m:/opt/kubernetes/pki/;
done

4.3.3 apiserver

4.3.3.1 请求文件

#m-1
cat > /opt/kubernetes/cfssl/apiserver-csr.json << EOF
{
  "CN": "kube-apiserver",
  "hosts": [
    "127.0.0.1",
    "20.0.0.1",
    "192.168.100.200",
    "192.168.100.201",
    "192.168.100.202",
    "192.168.100.203",
    "kubernetes",
    "kubernetes.default",
    "kubernetes.default.svc",
    "kubernetes.default.svc.cluster",
    "kubernetes.default.svc.cluster.local"
  ],
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "k8s",
      "OU": "System"
    }
  ]
}
EOF

#front-proxy-client
cat > /opt/kubernetes/cfssl/front-proxy-client-csr.json << EOF
{
  "CN": "front-proxy-client",
  "key": {
     "algo": "rsa",
     "size": 2048
  }
}
EOF

4.3.2.2 生成证书

#apiserver
cfssl gencert \
  -ca=/opt/kubernetes/pki/ca.pem \
  -ca-key=/opt/kubernetes/pki/ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/cfssl/apiserver-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/kube-apiserver

#front-proxy-client
cfssl gencert \
  -ca=/opt/kubernetes/pki/front-proxy-ca.pem \
  -ca-key=/opt/kubernetes/pki/front-proxy-ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/pki/front-proxy-client-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/front-proxy-client

#sa key
openssl genrsa -out /opt/kubernetes/ssl/sa.key 2048
openssl rsa -in /opt/kubernetes/ssl/sa.key -pubout -out /opt/kubernetes/ssl/sa.pub
  
#token
cat > /opt/kubernetes/cfg/token.csv << EOF
$(head -c 16 /dev/urandom | od -An -t x | tr -d ' '),kubelet-bootstrap,10001,"system:node-bootstrapper"
EOF

4.3.2.3 分发证书

for m in m-2 m-3; do
scp /opt/kubernetes/ssl/kube-apiserver* $m:/opt/kubernetes/ssl/;
scp /opt/kubernetes/ssl/sa* $m:/opt/kubernetes/ssl/;
scp /opt/kubernetes/cfg/token.csv $m:/opt/kubernetes/cfg/;
done

for m in m-2 m-3 n-1 n-2; do
scp /opt/kubernetes/pki/front-proxy* $m:/opt/kubernetes/pki/;
done
for m in m-2 m-3; do
scp /opt/kubernetes/ssl/front-proxy-client* $m:/opt/kubernetes/ssl/;
done

4.3.2.4 配置文件

#m-1 m-2 m-3
lip=$(hostname -i)
lip1="192.168.100.201"
lip2="192.168.100.202"
lip3="192.168.100.203"
lnm=$(hostname)
lnm1="m-1"
lnm2="m-2"
lnm3="m-3"
cat > /opt/kubernetes/cfg/kube-apiserver.conf << EOF
KUBE_APISERVER_OPTS="\\
  --advertise-address=$lip \\
  --allow-privileged=true \\
  --authorization-mode=Node,RBAC \\
  --client-ca-file=/opt/kubernetes/pki/ca.pem \\
  --enable-admission-plugins=NodeRestriction \\
  --enable-bootstrap-token-auth=true \\
  --token-auth-file=/opt/kubernetes/cfg/token.csv \\
  --enable-aggregator-routing=true \\
  --etcd-cafile=/opt/etcd/pki/ca.pem \\
  --etcd-certfile=/opt/etcd/ssl/etcd.pem \\
  --etcd-keyfile=/opt/etcd/ssl/etcd-key.pem \\
  --etcd-servers=https://192.168.100.201:2379,https://192.168.100.202:2379,https://192.168.100.203:2379 \\
  --kubelet-client-certificate=/opt/kubernetes/ssl/kube-apiserver.pem \\
  --kubelet-client-key=/opt/kubernetes/ssl/kube-apiserver-key.pem \\
  --proxy-client-cert-file=/opt/kubernetes/ssl/front-proxy-client.pem \\
  --proxy-client-key-file=/opt/kubernetes/ssl/front-proxy-client-key.pem \\
  --requestheader-allowed-names=front-proxy-client \\
  --requestheader-client-ca-file=/opt/kubernetes/pki/front-proxy-ca.pem \\
  --requestheader-extra-headers-prefix=X-Remote-Extra- \\
  --requestheader-group-headers=X-Remote-Group \\
  --requestheader-username-headers=X-Remote-User \\
  --secure-port=6443 \\
  --service-account-issuer=https://kubernetes.default.svc.cluster.local \\
  --service-account-key-file=/opt/kubernetes/ssl/sa.pub \\
  --service-account-signing-key-file=/opt/kubernetes/ssl/sa.key \\
  --service-cluster-ip-range=20.0.0.0/16 \\
  --tls-cert-file=/opt/kubernetes/ssl/kube-apiserver.pem \\
  --tls-private-key-file=/opt/kubernetes/ssl/kube-apiserver-key.pem \\
  --alsologtostderr=true \\
  --logtostderr=false \\
  --log-dir=/opt/kubernetes/logs/"
EOF

4.3.2.5 服务文件

#m-1 m-2 m-3
cat > /usr/lib/systemd/system/kube-apiserver.service << EOF
[Unit]
Description=Kubernetes API Server
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-apiserver.conf
ExecStart=-/opt/kubernetes/bin/kube-apiserver \$KUBE_APISERVER_OPTS
Restart=on-failure

[Install]
WantedBy=multi-user.target
EOF

4.3.2.6 启动验证

systemctl daemon-reload
systemctl enable --now kube-apiserver
systemctl status kube-apiserver

4.3.3 kubectl

4.3.3.1 请求文件

cat > /opt/kubernetes/cfssl/admin-csr.json << EOF
{
  "CN": "admin",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "system:masters",             
      "OU": "system"
    }
  ]
}
EOF

4.3.3.2 生成证书

cfssl gencert \
  -ca=/opt/kubernetes/pki/ca.pem \
  -ca-key=/opt/kubernetes/pki/ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/cfssl/admin-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/admin

4.3.3.3 配置文件

kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/kubernetes/pki/ca.pem \
  --embed-certs=true \
  --server=https://192.168.100.200:16443 \
  --kubeconfig=/opt/kubernetes/cfg/admin.kubeconfig

kubectl config set-credentials admin \
  --client-certificate=/opt/kubernetes/ssl/admin.pem \
  --client-key=/opt/kubernetes/ssl/admin-key.pem \
  --embed-certs=true \
  --kubeconfig=/opt/kubernetes/cfg/admin.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=admin \
  --kubeconfig=/opt/kubernetes/cfg/admin.kubeconfig

kubectl config use-context default \
  --kubeconfig=/opt/kubernetes/cfg/admin.kubeconfig
  
mkdir ~/.kube
cp /opt/kubernetes/cfg/admin.kubeconfig ~/.kube/config

#不然kubectl logs命令提出kube-apiserver无权限
kubectl create clusterrolebinding kube-apiserver:kubelet-apis --clusterrole=system:kubelet-api-admin --user kube-apiserver --kubeconfig ~/.kube/config

4.3.3.4 命令补全

apt install -y bash-completion
source /usr/share/bash-completion/bash_completion
source <(kubectl completion bash)
kubectl completion bash > ~/.kube/completion.bash.inc
source '/root/.kube/completion.bash.inc'

4.3.4 controller-manager

4.3.4.1 请求文件

cat > /opt/kubernetes/cfssl/kube-controller-manager-csr.json << EOF
{
    "CN": "system:kube-controller-manager",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Chongqing",
        "L": "Chongqing",
        "O": "system:kube-controller-manager",
        "OU": "system"
      }
    ]
}
EOF

4.3.4.2 生成证书

cfssl gencert \
  -ca=/opt/kubernetes/pki/ca.pem \
  -ca-key=/opt/kubernetes/pki/ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/cfssl/kube-controller-manager-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/kube-controller-manager

4.3.4.3 kubeconfig

kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/kubernetes/pki/ca.pem \
  --embed-certs=true \
  --server=https://192.168.100.200:16443 \
  --kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig

kubectl config set-credentials system:kube-controller-manager \
  --client-certificate=/opt/kubernetes/ssl/kube-controller-manager.pem \
  --client-key=/opt/kubernetes/ssl/kube-controller-manager-key.pem \
  --embed-certs=true \
  --kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig

kubectl config set-context system:kube-controller-manager \
  --cluster=kubernetes \
  --user=system:kube-controller-manager \
  --kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig

kubectl config use-context system:kube-controller-manager \
  --kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig

4.3.4.4 分发证书

for m in m-2 m-3; do
scp /opt/kubernetes/ssl/kube-controller-manager* $m:/opt/kubernetes/ssl;
scp /opt/kubernetes/cfg/kube-controller-manager.kubeconfig $m:/opt/kubernetes/cfg/;
done

4.3.4.5 配置文件

lip=$(hostname -i)
cat > /opt/kubernetes/cfg/kube-controller-manager.conf << EOF
KUBE_CONTROLLER_MANAGER_OPTS=" \\
  --allocate-node-cidrs=true \\
  --authentication-kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig \\
  --authorization-kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig \\
  --bind-address=127.0.0.1 \\
  --client-ca-file=/opt/kubernetes/pki/ca.pem \\
  --cluster-cidr=10.0.0.0/16 \\
  --cluster-name=kubernetes \\
  --cluster-signing-cert-file=/opt/kubernetes/pki/ca.pem \\
  --cluster-signing-key-file=/opt/kubernetes/pki/ca-key.pem \\
  --controllers=*,bootstrapsigner,tokencleaner
  --kubeconfig=/opt/kubernetes/cfg/kube-controller-manager.kubeconfig \\
  --leader-elect=true \\
  --requestheader-client-ca-file=/opt/kubernetes/pki/front-proxy-ca.pem \\
  --root-ca-file=/opt/kubernetes/pki/ca.pem \\
  --service-account-private-key-file=/opt/kubernetes/ssl/sa.key  \\
  --service-cluster-ip-range=20.0.0.0/16 \\
  --use-service-account-credentials=true \\
  --alsologtostderr=true \\
  --logtostderr=false \\
  --log-dir=/opt/kubernetes/logs"
EOF

4.3.4.6 服务文件

cat > /usr/lib/systemd/system/kube-controller-manager.service << EOF
[Unit]
Description=Kubernetes Controller Manager
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-controller-manager.conf
ExecStart=-/opt/kubernetes/bin/kube-controller-manager \$KUBE_CONTROLLER_MANAGER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

4.3.4.7 启动验证

systemctl daemon-reload 
systemctl enable --now kube-controller-manager
systemctl status kube-controller-manager

4.3.5 scheduler

4.3.5.1 请求文件

cat > /opt/kubernetes/cfssl/kube-scheduler-csr.json << EOF
{
    "CN": "system:kube-scheduler",
    "key": {
        "algo": "rsa",
        "size": 2048
    },
    "names": [
      {
        "C": "CN",
        "ST": "Chongqing",
        "L": "Chongqing",
        "O": "system:kube-scheduler",
        "OU": "system"
      }
    ]
}
EOF

4.3.5.2 生成证书

cfssl gencert \
  -ca=/opt/kubernetes/pki/ca.pem \
  -ca-key=/opt/kubernetes/pki/ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/cfssl/kube-scheduler-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/kube-scheduler

4.3.5.3 kubeconfig

kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/kubernetes/pki/ca.pem \
  --embed-certs=true \
  --server=https://192.168.100.200:16443 \
  --kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig

kubectl config set-credentials system:kube-scheduler \
  --client-certificate=/opt/kubernetes/ssl/kube-scheduler.pem \
  --client-key=/opt/kubernetes/ssl/kube-scheduler-key.pem \
  --embed-certs=true \
  --kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig

kubectl config set-context system:kube-scheduler \
  --cluster=kubernetes \
  --user=system:kube-scheduler \
  --kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig

kubectl config use-context system:kube-scheduler \
  --kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig

4.3.5.4 分发证书

for m in m-2 m-3; do
scp /opt/kubernetes/ssl/kube-scheduler* $m:/opt/kubernetes/ssl;
scp /opt/kubernetes/cfg/kube-scheduler.kubeconfig $m:/opt/kubernetes/cfg/;
done

4.3.5.5 配置文件

cat > /opt/kubernetes/cfg/kube-scheduler.conf << EOF
KUBE_SCHEDULER_OPTS=" \\
--bind-address=127.0.0.1 \\
--leader-elect=true \\
--authentication-kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig \\
--authorization-kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig \\
--kubeconfig=/opt/kubernetes/cfg/kube-scheduler.kubeconfig \\
--alsologtostderr=true \\
--logtostderr=false \\
--log-dir=/opt/kubernetes/logs"
EOF

4.3.5.6 服务文件

cat > /usr/lib/systemd/system/kube-scheduler.service << EOF
[Unit]
Description=Kubernetes Scheduler
Documentation=https://github.com/kubernetes/kubernetes

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-scheduler.conf
ExecStart=/opt/kubernetes/bin/kube-scheduler \$KUBE_SCHEDULER_OPTS
Restart=on-failure
RestartSec=5

[Install]
WantedBy=multi-user.target
EOF

4.3.5.7 启动验证

systemctl daemon-reload
systemctl enable --now kube-scheduler
systemctl status kube-scheduler

4.3.6 kubelet

4.3.6.1 kubeconfig

TOKEN=$(awk -F "," '{print $1}' /opt/kubernetes/cfg/token.csv)

kubectl config set-cluster kubernetes \
--certificate-authority=/opt/kubernetes/pki/ca.pem \
--embed-certs=true \
--server=https://192.168.100.200:16443 \
--kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig

kubectl config set-credentials "kubelet-bootstrap" \
--token=${TOKEN} \
--kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig


kubectl config set-context default \
--cluster=kubernetes \
--user="kubelet-bootstrap" \
--kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig

kubectl config use-context default --kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig

kubectl create clusterrolebinding kubelet-bootstrap --clusterrole=system:node-bootstrapper --user=kubelet-bootstrap

4.3.6.2 分发证书

for m in n-1 n-2; do
scp /opt/kubernetes/cfg/bootstrap.kubeconfig $m:/opt/kubernetes/cfg/;
done

4.3.6.3 配置文件

lip=$(hostname -i)
cat > /opt/kubernetes/cfg/kubelet.yml << EOF
apiVersion: kubelet.config.k8s.io/v1beta1
authentication:
  anonymous:
    enabled: false
  webhook:
    cacheTTL: 0s
    enabled: true
  x509:
    clientCAFile: /opt/kubernetes/pki/ca.pem
authorization:
  mode: Webhook
  webhook:
    cacheAuthorizedTTL: 0s
    cacheUnauthorizedTTL: 0s
cgroupDriver: systemd
clusterDNS:
- 20.0.0.10
clusterDomain: cluster.local
healthzBindAddress: 127.0.0.1
healthzPort: 10248
kind: KubeletConfiguration
EOF

cat > /opt/kubernetes/cfg/kubelet.conf << EOF
KUBELET_OPTS="\\
--network-plugin=cni \\
--kubeconfig=/opt/kubernetes/cfg/kubelet.kubeconfig \\
--bootstrap-kubeconfig=/opt/kubernetes/cfg/bootstrap.kubeconfig \\
--config=/opt/kubernetes/cfg/kubelet.yml \\
--cert-dir=/opt/kubernetes/ssl/ \\
--pod-infra-container-image=registry.aliyuncs.com/google_containers/pause:3.5 \\
--log-dir=/opt/kubernetes/logs/ \\
--alsologtostderr=true \\
--logtostderr=false"
EOF

4.3.6.4 服务文件

cat > /usr/lib/systemd/system/kubelet.service << EOF
[Unit]
Description=Kubernetes Kubelet
Wants=network-online.target
After=network-online.target

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kubelet.conf
ExecStart=/opt/kubernetes/bin/kubelet \$KUBELET_OPTS
Restart=always
StartLimitInterval=0
RestartSec=10

[Install]
WantedBy=multi-user.target
EOF

4.3.6.5 启动验证

systemctl daemon-reload
systemctl enable --now kubelet
systemctl status kubelet

4.3.6.6 Approve

kubectl get csr | grep Pending | awk '{print $1}' | xargs kubectl certificate approve
kubectl get nodes

4.3.7 proxy

4.3.7.1 请求文件

cat > /opt/kubernetes/cfssl/kube-proxy-csr.json << "EOF"
{
  "CN": "system:kube-proxy",
  "key": {
    "algo": "rsa",
    "size": 2048
  },
  "names": [
    {
      "C": "CN",
      "ST": "Chongqing",
      "L": "Chongqing",
      "O": "k8s",
      "OU": "system"
    }
  ]
}
EOF

4.3.7.2 生成证书

cfssl gencert \
  -ca=/opt/kubernetes/pki/ca.pem \
  -ca-key=/opt/kubernetes/pki/ca-key.pem \
  -config=/opt/kubernetes/cfssl/ca-config.json \
  -profile=kubernetes /opt/kubernetes/cfssl/kube-proxy-csr.json | cfssljson \
  -bare /opt/kubernetes/ssl/kube-proxy

4.3.7.3 kubeconfig

kubectl config set-cluster kubernetes \
  --certificate-authority=/opt/kubernetes/pki/ca.pem \
  --embed-certs=true \
  --server=https://192.168.100.200:16443 \
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig

kubectl config set-credentials kube-proxy \
  --client-certificate=/opt/kubernetes/ssl/kube-proxy.pem \
  --client-key=/opt/kubernetes/ssl/kube-proxy-key.pem \
  --embed-certs=true \
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig

kubectl config set-context default \
  --cluster=kubernetes \
  --user=kube-proxy \
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig

kubectl config use-context default \
  --kubeconfig=/opt/kubernetes/cfg/kube-proxy.kubeconfig

4.3.7.4 分发证书

for m in n-1 n-2; do
  scp /opt/kubernetes/ssl/kube-proxy* $m:/opt/kubernetes/ssl;
  scp /opt/kubernetes/cfg/kube-proxy.kubeconfig $m:/opt/kubernetes/cfg/;
done

4.3.7.5 配置文件

lip=$(hostname -i)
cat > /opt/kubernetes/cfg/kube-proxy.yml << EOF
apiVersion: kubeproxy.config.k8s.io/v1alpha1
bindAddress: $lip
clientConnection:
  kubeconfig: /opt/kubernetes/cfg/kube-proxy.kubeconfig
clusterCIDR: 10.0.0.0/16
healthzBindAddress: 127.0.0.1
healthzPort: 10248
kind: KubeProxyConfiguration
metricsBindAddress: 127.0.0.1
metricsPort: 10248
mode: "ipvs"
EOF

lhn=$(hostname)
cat > /opt/kubernetes/cfg/kube-proxy.conf << EOF
KUBE_PROXY_OPTS="--v=2 \\
--config=/opt/kubernetes/cfg/kube-proxy.yml \\
--hostname-override=$lhn \\
--alsologtostderr=true \\
--logtostderr=false \\
--log-dir=/opt/kubernetes/logs/
EOF

4.3.7.6 服务文件

cat >  /usr/lib/systemd/system/kube-proxy.service << EOF
[Unit]
Description=Kubernetes Kube-Proxy Server
Documentation=https://github.com/kubernetes/kubernetes
After=network.target

[Service]
EnvironmentFile=/opt/kubernetes/cfg/kube-proxy.conf
ExecStart=-/opt/kubernetes/bin/kube-proxy \$KUBE_PROXY_OPTS
Restart=on-failure
RestartSec=5
LimitNOFILE=65536

[Install]
WantedBy=multi-user.target
EOF

4.3.7.7 启动验证

systemctl daemon-reload
systemctl enable --now kube-proxy
systemctl status kube-proxy

4.3.8 calico

wget https://docs.projectcalico.org/v3.20/manifests/calico.yaml
kubectl apply -f calico.yaml

4.3.9 coredns

wget https://raw.githubusercontent.com/coredns/deployment/master/kubernetes/coredns.yaml.sed
#修改如下内容
clusterIP: 20.0.0.10

apiVersion: v1
kind: ConfigMap
metadata:
  name: coredns
  namespace: kube-system
data:
  Corefile: |
    .:53 {
        errors
        health {
          lameduck 5s
        }
        ready
        kubernetes cluster.local in-addr.arpa ip6.arpa {
          fallthrough in-addr.arpa ip6.arpa
        }
        prometheus :9153
        forward . /etc/resolv.conf {
          max_concurrent 1000
        }
        cache 30
        loop
        reload
        loadbalance
    }

kubectl -n kube-system get pod | awk '{print $1}' | grep -E 'canal|calico|flannel' | xargs kubectl -n kube-system delete pod

K8S/Kubernetes

K8S/Kubernetes社区为您提供最前沿的新闻资讯和知识内容

更多推荐

【深度】阿里巴巴万级规模 K8s 集群全局高可用体系之美

作者 | 韩堂、柘远、沉醉来源 | 阿里巴巴云原生公众号前言台湾作家林清玄在接受记者采访的时候，如此评价自己 30 多年写作生涯：“第一个十年我才华横溢，‘贼光闪现’，令周边黯然失色；第二个十年，我终于‘宝光现形’，不再去抢风头，反而与身边的美丽相得益彰；进入第三个十年，繁华落尽见真醇，我进入了‘醇光初现’的阶段，真正体味到了境界之美”。长夜有穷，真水无香。领略过了 K8s“身在江

K8S/Kubernetes

如何基于 K8s 构建下一代 DevOps 平台？

作者 | 孙健波（天元）导读：当前云原生 DevOps 体系现状如何？面临哪些挑战？如何通过 OAM 解决云原生 DevOps 场景下的诸多问题？云原生开发应用模型 OAM(Open Application Model) 社区核心成员孙健波将为大家一一解答，并分享如何基于 OAM 和 Kubernetes 打造无限能力的下一代 DevOps 平台。什么是 DevOps？为什么基于 Kub