操作环境

网络拓扑图




、

操作环境：

k8s-master：

OS： 

[root@k8s-master ~]# cat /etc/redhat-release 
CentOS Linux release 7.4.1708 (Core)

etcd： 

[root@k8s-master ~]# etcd --version
etcd Version: 3.2.9
Git SHA: f1d7dd8
Go Version: go1.8.3
Go OS/Arch: linux/amd64

Kubernetes： 

[root@k8s-master ~]# kubectl version
Client Version: version.Info{Major:"1", Minor:"5", GitVersion:"v1.5.2", GitCommit:"269f928217957e7126dc87e6adfa82242bfe5b1e", GitTreeState:"clean", BuildDate:"2017-07-03T15:31:10Z", GoVersion:"go1.7.4", Compiler:"gc", Platform:"linux/amd64"}
Server Version: version.Info{Major:"1", Minor:"5", GitVersion:"v1.5.2", GitCommit:"269f928217957e7126dc87e6adfa82242bfe5b1e", GitTreeState:"clean", BuildDate:"2017-07-03T15:31:10Z", GoVersion:"go1.7.4", Compiler:"gc", Platform:"linux/amd64"}

k8s-node1&k8s-node2：

OS： 

[root@k8s-node1 ~]# cat /etc/redhat-release 
CentOS Linux release 7.4.1708 (Core)

etcd： 

[root@k8s-node1 ~]# etcd --version
etcd Version: 3.2.9
Git SHA: f1d7dd8
Go Version: go1.8.3
Go OS/Arch: linux/amd64

docker： 

[root@k8s-node1 ~]# docker version
Client:
 Version:         1.12.6
 API version:     1.24
 Package version: docker-1.12.6-68.gitec8512b.el7.centos.x86_64
 Go version:      go1.8.3
 Git commit:      ec8512b/1.12.6
 Built:           Mon Dec 11 16:08:42 2017
 OS/Arch:         linux/amd64

Server:
 Version:         1.12.6
 API version:     1.24
 Package version: docker-1.12.6-68.gitec8512b.el7.centos.x86_64
 Go version:      go1.8.3
 Git commit:      ec8512b/1.12.6
 Built:           Mon Dec 11 16:08:42 2017
 OS/Arch:         linux/amd64


Kubernetes： 

[root@k8s-node1 ~]# kubectl version
Client Version: version.Info{Major:"1", Minor:"5", GitVersion:"v1.5.2", GitCommit:"269f928217957e7126dc87e6adfa82242bfe5b1e", GitTreeState:"clean", BuildDate:"2017-07-03T15:31:10Z", GoVersion:"go1.7.4", Compiler:"gc", Platform:"linux/amd64"}


安装部署

安装前准备

在安装部署集群前，先将三台服务器的时间通过NTP进行同步，否则，在后面的运行中可能会提示错误 

[root@k8s-node1 ~]# ntpdate -u cn.pool.ntp.org


在node节点上安装redhat-ca.crt

[root@k8s-node1 ~]# yum install *rhsm* -y

etcd集群配置

master节点配置

1.安装kubernetes etcd 

[root@k8s-master ~]# yum -y install kubernetes-master etcd

2.配置etcd选项
ETCD_DATA_DIR /ETCD_LISTEN_PEER_URLS/ETCD_LISTEN_CLIENT_URLS/ETCD_MAX_SNAPSHOTS/ETCD_NAME/ETCD_INITIAL_ADVERTISE_PEERURLS/ETCD_ADVERTISE_CLIENT_URLS/ETCD_INITIAL_CLUSTER 

[root@k8s-master ~]# vi /etc/etcd/etcd.conf 
#[Member]
#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
ETCD_LISTEN_PEER_URLS="http://10.10.200.224:2380"
ETCD_LISTEN_CLIENT_URLS="http://10.10.200.224:2379,http://127.0.0.1:2379"
ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
ETCD_NAME="etcd1"
#ETCD_SNAPSHOT_COUNT="100000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_QUOTA_BACKEND_BYTES="0"
#
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.200.224:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://10.10.200.224:2379"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_DISCOVERY_SRV=""
ETCD_INITIAL_CLUSTER="etcd1=http://10.10.200.224:2380,etcd2=http://10.10.200.229:2380,etcd3=http://10.10.200.230:2380"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_STRICT_RECONFIG_CHECK="true"
#ETCD_ENABLE_V2="true"
#
#[Proxy]
#ETCD_PROXY="off"
#ETCD_PROXY_FAILURE_WAIT="5000"
#ETCD_PROXY_REFRESH_INTERVAL="30000"
#ETCD_PROXY_DIAL_TIMEOUT="1000"
#ETCD_PROXY_WRITE_TIMEOUT="5000"
#ETCD_PROXY_READ_TIMEOUT="0"
#
#[Security]
#ETCD_CERT_FILE=""
#ETCD_KEY_FILE=""
#ETCD_CLIENT_CERT_AUTH="false"
#ETCD_TRUSTED_CA_FILE=""
#ETCD_AUTO_TLS="false"
#ETCD_PEER_CERT_FILE=""
#ETCD_PEER_KEY_FILE=""
#ETCD_PEER_CLIENT_CERT_AUTH="false"
#ETCD_PEER_TRUSTED_CA_FILE=""
#ETCD_PEER_AUTO_TLS="false"
#
#[Logging]
#ETCD_DEBUG="false"
#ETCD_LOG_PACKAGE_LEVELS=""
#ETCD_LOG_OUTPUT="default"
#
#[Unsafe]
#ETCD_FORCE_NEW_CLUSTER="false"
#
#[Version]
#ETCD_VERSION="false"
#ETCD_AUTO_COMPACTION_RETENTION="0"
#
#[Profiling]
#ETCD_ENABLE_PPROF="false"
#ETCD_METRICS="basic"
#
#[Auth]
#ETCD_AUTH_TOKEN="simple"

nodes节点配置

1.安装部署 kubernetes-node/etcd/flannel/docker 

[root@k8s-node1 ~]# yum -y install kubernetes-node etcd flannel docker

2.分别配置etcd，node1与node2的配置方法相同，以node1配置文件为例说明 

[root@k8s-node1 ~]# vi /etc/etcd/etcd.conf 
#[Member]
#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
ETCD_LISTEN_PEER_URLS="http://10.10.200.229:2380"
ETCD_LISTEN_CLIENT_URLS="http://10.10.200.229:2379,http://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
ETCD_NAME="etcd2"
#ETCD_SNAPSHOT_COUNT="100000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_QUOTA_BACKEND_BYTES="0"
#
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.200.229:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://10.10.200.229:2379"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
"/etc/etcd/etcd.conf" 66L, 1696C
#[Member]
#ETCD_CORS=""
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
#ETCD_WAL_DIR=""
ETCD_LISTEN_PEER_URLS="http://10.10.200.229:2380"
ETCD_LISTEN_CLIENT_URLS="http://10.10.200.229:2379,http://127.0.0.1:2379"
#ETCD_MAX_SNAPSHOTS="5"
#ETCD_MAX_WALS="5"
ETCD_NAME="etcd2"
#ETCD_SNAPSHOT_COUNT="100000"
#ETCD_HEARTBEAT_INTERVAL="100"
#ETCD_ELECTION_TIMEOUT="1000"
#ETCD_QUOTA_BACKEND_BYTES="0"
#
#[Clustering]
ETCD_INITIAL_ADVERTISE_PEER_URLS="http://10.10.200.229:2380"
ETCD_ADVERTISE_CLIENT_URLS="http://10.10.200.229:2379"
#ETCD_DISCOVERY=""
#ETCD_DISCOVERY_FALLBACK="proxy"
#ETCD_DISCOVERY_PROXY=""
#ETCD_DISCOVERY_SRV=""
#ETCD_INITIAL_CLUSTER="default=http://localhost:2380"
#ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
#ETCD_INITIAL_CLUSTER_STATE="new"
#ETCD_STRICT_RECONFIG_CHECK="true"
#ETCD_ENABLE_V2="true"
ETCD_INITIAL_CLUSTER="etcd1=http://10.10.200.224:2380,etcd2=http://10.10.200.229:2380,etcd3=http://10.10.200.230:2380"
#
#[Proxy]
#ETCD_PROXY="off"
#ETCD_PROXY_FAILURE_WAIT="5000"
#ETCD_PROXY_REFRESH_INTERVAL="30000"
#ETCD_PROXY_DIAL_TIMEOUT="1000"
#ETCD_PROXY_WRITE_TIMEOUT="5000"
#ETCD_PROXY_READ_TIMEOUT="0"
#
#[Security]
#ETCD_CERT_FILE=""
#ETCD_KEY_FILE=""
#ETCD_CLIENT_CERT_AUTH="false"
#ETCD_TRUSTED_CA_FILE=""
#ETCD_AUTO_TLS="false"
#ETCD_PEER_CERT_FILE=""
#ETCD_PEER_KEY_FILE=""
#ETCD_PEER_CLIENT_CERT_AUTH="false"
#ETCD_PEER_TRUSTED_CA_FILE=""
#ETCD_PEER_AUTO_TLS="false"
#
#[Logging]
#ETCD_DEBUG="false"
#ETCD_LOG_PACKAGE_LEVELS=""
#ETCD_LOG_OUTPUT="default"
#
#[Unsafe]
#ETCD_FORCE_NEW_CLUSTER="false"
#
#[Version]
#ETCD_VERSION="false"
#ETCD_AUTO_COMPACTION_RETENTION="0"
#
#[Profiling]
#ETCD_ENABLE_PPROF="false"
#ETCD_METRICS="basic"
#
#[Auth]
#ETCD_AUTH_TOKEN="simple"

启动etcd cluster

分别在3台服务器启动etcd 

[root@k8s-master ~]# systemctl start etcd.service
[root@k8s-master ~]# systemctl status etcd.service 
?etcd.service - Etcd Server
   Loaded: loaded (/usr/lib/systemd/system/etcd.service; disabled; vendor preset: disabled)
   Active: active (running) since Wed 2018-01-03 09:21:36 CST; 1h 41min ago
 Main PID: 11426 (etcd)
   CGroup: /system.slice/etcd.service
           忖11426 /usr/bin/etcd --name=etcd1 --data-dir=/var/lib/etcd/default.etcd --listen-client-urls=http://10.10.200.224:2379,http://127.0.0.1:2379

查看etcd集群状态 

[root@k8s-master ~]# etcdctl cluster-health
member 359947fae86629a7 is healthy: got healthy result from http://10.10.200.224:2379
member 4be7ddbd3bb99ca0 is healthy: got healthy result from http://10.10.200.229:2379
member 84951a697d1bf6a0 is healthy: got healthy result from http://10.10.200.230:2379
cluster is healthy

Kubernetes集群配置

master节点配置

1.apiserver配置文件修改，注意KUBE_ADMISSION_CONTROL选项的参数配置 

[root@k8s-master ~]# vi /etc/kubernetes/apiserver 
###
# kubernetes system config
#
# The following values are used to configure the kube-apiserver
#

# The address on the local server to listen to.
#KUBE_API_ADDRESS="--insecure-bind-address=127.0.0.1"
KUBE_API_ADDRESS="--address=0.0.0.0"

# The port on the local server to listen on.
KUBE_API_PORT="--port=8080"

# Port minions listen on
KUBELET_PORT="--kubelet-port=10250"

# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://10.10.200.224:2379,http://10.10.200.229:2379,http://10.10.200.230:2379"

# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

# default admission control policies
#KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"

KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,ResourceQuota"

# Add your own!
KUBE_API_ARGS=""

2.启动服务 

[root@k8s-master ~]# systemctl start kube-apiserver
[root@k8s-master ~]# systemctl start kube-controller-manager
[root@k8s-master ~]# systemctl start kube-scheduler
[root@k8s-master ~]# systemctl enable kube-apiserver
[root@k8s-master ~]# systemctl enable kube-controller-manager
[root@k8s-master ~]# systemctl enable kube-scheduler

nodes节点配置

1.配置config配置，node1&node2配置相同，以node1为例说明 

[root@k8s-node1 ~]# vi /etc/kubernetes/config 
###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://10.10.200.224:8080"

2.配置kubelet 

[root@k8s-node1 ~]# vi /etc/kubernetes/kubelet 
###
# kubernetes kubelet (minion) config

# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=127.0.0.1"

# The port for the info server to serve on
# KUBELET_PORT="--port=10250"

# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=10.10.200.229"

# location of the api-server
KUBELET_API_SERVER="--api-servers=http://10.10.200.224:8080"

# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Add your own!
KUBELET_ARGS=""

网络配置

这里使用flannel进行网络配置，已经在2个节点上安装，下面进行配置。

在节点上进行配置flannel 

[root@k8s-node1 ~]# vi /etc/sysconfig/flanneld 
# Flanneld configuration options

# etcd url location.  Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://10.10.200.224:2379"

# etcd config key.  This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"

# Any additional options that you want to pass
#FLANNEL_OPTIONS=""

查看集群状态

[root@k8s-master ~]# kubectl get nodes
NAME            STATUS    AGE
10.10.200.229   Ready     1h
10.10.200.230   Ready     1h
[root@k8s-master ~]# etcdctl  member list
359947fae86629a7: name=etcd1 peerURLs=http://10.10.200.224:2380 clientURLs=http://10.10.200.224:2379 isLeader=true
4be7ddbd3bb99ca0: name=etcd2 peerURLs=http://10.10.200.229:2380 clientURLs=http://10.10.200.229:2379 isLeader=false
84951a697d1bf6a0: name=etcd3 peerURLs=http://10.10.200.230:2380 clientURLs=http://10.10.200.230:2379 isLeader=false
[root@k8s-master ~]# etcdctl cluster-health
member 359947fae86629a7 is healthy: got healthy result from http://10.10.200.224:2379
member 4be7ddbd3bb99ca0 is healthy: got healthy result from http://10.10.200.229:2379
member 84951a697d1bf6a0 is healthy: got healthy result from http://10.10.200.230:2379
cluster is healthy

测试使用

在测试使用前，现在2个节点上手动下载pod images，以及测试使用的nginx images 

[root@k8s-node1 ~]# docker pull registry.access.redhat.com/rhel7/pod-infrastructure:latest

[root@k8s-node1 ~]# docker pull  nginx

运行nginx 

[root@k8s-master ~]# kubectl  run my-nginx --image=nginx --replicas=2 --port=80
deployment "my-nginx" created

查看pods 

[root@k8s-master ~]# kubectl get pods
NAME                       READY     STATUS    RESTARTS   AGE
my-nginx-379829228-55s8n   1/1       Running   0          39s
my-nginx-379829228-th5t1   1/1       Running   0          39s

可以在node节点上查看到对应的containers 
[root@k8s-node1 ~]# docker ps
CONTAINER ID        IMAGE                                                        COMMAND                  CREATED              STATUS              PORTS               NAMES
1c32b101cb69        nginx                                                        "nginx -g 'daemon off"   About a minute ago   Up About a minute                       k8s_my-nginx.a65fe6c_my-nginx-379829228-55s8n_default_7d5085b9-f035-11e7-a6c1-000c29183fc3_edf658c9
de9936bea577        registry.access.redhat.com/rhel7/pod-infrastructure:latest   "/usr/bin/pod"           About a minute ago   Up About a minute                       k8s_POD.a8590b41_my-nginx-379829228-55s8n_default_7d5085b9-f035-11e7-a6c1-000c29183fc3_86d80c42


[root@k8s-node2 ~]# docker ps
CONTAINER ID        IMAGE                                                        COMMAND                  CREATED             STATUS              PORTS               NAMES
c064a3fef6d3        nginx                                                        "nginx -g 'daemon off"   2 minutes ago       Up 2 minutes                            k8s_my-nginx.a65fe6c_my-nginx-379829228-th5t1_default_7d50757d-f035-11e7-a6c1-000c29183fc3_a2431e86
85e437bc7eb7        registry.access.redhat.com/rhel7/pod-infrastructure:latest   "/usr/bin/pod"           2 minutes ago       Up 2 minutes                            k8s_POD.a8590b41_my-nginx-379829228-th5t1_default_7d50757d-f035-11e7-a6c1-000c29183fc3_419a9356




Logo
K8S/Kubernetes

K8S/Kubernetes社区为您提供最前沿的新闻资讯和知识内容

更多推荐

【深度】阿里巴巴万级规模 K8s 集群全局高可用体系之美

作者 |  韩堂、柘远、沉醉来源 | 阿里巴巴云原生公众号​前言台湾作家林清玄在接受记者采访的时候，如此评价自己 30 多年写作生涯：“第一个十年我才华横溢，‘贼光闪现’，令周边黯然失色；第二个十年，我终于‘宝光现形’，不再去抢风头，反而与身边的美丽相得益彰；进入第三个十年，繁华落尽见真醇，我进入了‘醇光初现’的阶段，真正体味到了境界之美”。​长夜有穷，真水无香。领略过了 K8s“身在江

avatar K8S/Kubernetes

如何基于 K8s 构建下一代 DevOps 平台？

作者 | 孙健波（天元）导读：当前云原生 DevOps 体系现状如何？面临哪些挑战？如何通过 OAM 解决云原生 DevOps 场景下的诸多问题？云原生开发应用模型 OAM(Open Application Model) 社区核心成员孙健波将为大家一一解答，并分享如何基于 OAM 和 Kubernetes 打造无限能力的下一代 DevOps 平台。什么是 DevOps？为什么基于 Kub

avatar K8S/Kubernetes

k8s 火了！

2020，上云之年，产品云端化成为一种趋势。在一线城市，很多公司都已经构建了自己的私有云环境，比如阿里云、网易云、华为云等。而Kubernetes 作为基于容器编排领域的王者，具备扩展...

avatar K8S/Kubernetes