oVirt 4.4.10三节点超融合集群安装配置及集群扩容(一)

通过开源oVirt项目搭建部署中小企业私有云平台

文章共3,977字 · 阅读需要大约14分钟

一键AI生成摘要，助你高效阅读

问答

charnet1019

2542人浏览 · 2023-06-04 16:56:43

charnet1019 · 2023-06-04 16:56:43 发布

环境

oVrit版本: 4.4.10
oVirt image: https://mirrors.aliyun.com/ovirt/ovirt-4.4/iso/ovirt-node-ng-installer/4.4.10-2022030308/el8/ovirt-node-ng-installer-4.4.10-2022030308.el8.iso?spm=a2c6h.25603864.0.0.46c8a3e6ELIYzK
oVirt engine appliance: https://mirrors.aliyun.com/ovirt/ovirt-4.4/rpm/el8/x86_64/ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm?spm=a2c6h.25603864.0.0.3bfc4453NnSFms
virt-viewer: https://releases.pagure.org/virt-viewer/virt-viewer-x64-11.0-1.0.msi
virtio-win<windows磁盘驱动>: https://fedorapeople.org/groups/virt/virtio-win/direct-downloads/archive-virtio/virtio-win-0.1.229-1/

参考文档: https://www.cnovirt.com/archives/2739
交换机网口绑定请参考: https://blog.csdn.net/weixin_43667733/article/details/106363918

备注: 每个服务有2块硬盘，一块用于系统盘，一块用于glusterfs数据盘；生产环境建议系统盘做RAID 1, 两个固态硬盘做RAID 1用于GFS缓存，4块10K盘(15K SAS硬盘或SSD盘做RAID 10或RAID 5)做RAID 10；
网络环境建议最低两个1000M端口做绑定，有条件的可以上光口；注意需要先在oVirt engine管理页面做完端口绑定后再在交换机上配置物理接口端口绑定(LACP)

Node:
主机名: node100.com
IP: 192.168.5.100
子网掩码: 255.255.255.0
网关: 192.168.5.1

主机名: node101.com
IP: 192.168.5.101
子网掩码: 255.255.255.0
网关: 192.168.5.1

主机名: node102.com
IP: 192.168.5.102
子网掩码: 255.255.255.0
网关: 192.168.5.1

Engine<以虚拟机运行在node上>:
主机名: engine103.com
IP: 192.168.5.103
子网掩码: 255.255.255.0
网关: 192.168.5.1

操作步骤

oVirt节点安装请参考https://www.cnovirt.com/archives/2739，注意不需要更新系统。
在3台node主机上设置hosts解析

[root@node100 yum.repos.d]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6

192.168.5.100 node100.com
192.168.5.101 node101.com
192.168.5.102 node102.com
192.168.5.103 engine103.com

将3个node节点上的/etc/yum.repos.d/文件备份到backup目录下
备注: /etc/yum.repos.d目录下建议为空，否则后续安装gfs时容易报错或执行过程卡住

[root@node100 yum.repos.d]# cd /etc/yum.repos.d
[root@node100 yum.repos.d]# mkdir backup && mv *.repo backup

在其中一个node节点上设置到所有节点的ssh免密登录，此处在node100上操作

[root@node100 home]# ssh-keygen
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):
Created directory '/root/.ssh'.
Enter passphrase (empty for no passphrase):
Enter same passphrase again:
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:zblxgJtmcmXSzb1UJDZfW1H5QzUCLiXH6/Z+L3zJMvM root@node100.com
The key's randomart image is:
+---[RSA 3072]----+
|         ..+..++%|
|         o=+ o.B=|
|        o.=.+ +.o|
|         O.+ . o.|
|      . S * . . .|
|       =   *     |
|          o ... .|
|             =o+.|
|            ..*Eo|
+----[SHA256]-----+

将公钥复制到3个node节点上

[root@node100 home]# ssh-copy-id -i node100.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'node210.com (192.168.5.100)' can't be established.
ECDSA key fingerprint is SHA256:guijB0PYTD0GEWvjAe2cIcQsFrgPqyz/RA9dBK47G0Q.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node100.com's password: 

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'node100.com'"
and check to make sure that only the key(s) you wanted were added.

[root@node100 home]# ssh-copy-id -i node101.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'node211.com (192.168.5.101)' can't be established.
ECDSA key fingerprint is SHA256:+fF+ihZRIyOKRHRlxdp5W3Mjbv/GuOrhbL2Qx+TeY50.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node101.com's password: 

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'node101.com'"
and check to make sure that only the key(s) you wanted were added.

[root@node100 home]# ssh-copy-id -i node102.com
/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host 'node212.com (192.168.5.102)' can't be established.
ECDSA key fingerprint is SHA256:zLUCpZoeljM6hDMZJkLXs+RSBlh9O1wZ/p3ThNNPRhE.
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@node102.com's password: 

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'node102.com'"
and check to make sure that only the key(s) you wanted were added.

下载ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm并安装

[root@node100 src]# pwd
/data/src
[root@node100 src]# ls
ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm
[root@node100 src]# rpm -ivh ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm
warning: ovirt-engine-appliance-4.4-20220308105414.1.el8.x86_64.rpm: Header V4 RSA/SHA256 Signature, key ID fe590cb7: NOKEY
Verifying...                          ################################# [100%]
Preparing...                          ################################# [100%]
Updating / installing...
   1:ovirt-engine-appliance-4.4-202203################################# [100%]

安装完成后，通过浏览器打开这台主机的Web控制台（即Cockpit），地址为：https://192.168.5.100:9090（注意IP地址替换成你实际环境的），使用root帐号登录，如下：
ovirt login
进入HostedEngine页面，点击“Hyperconverged”向导的“Start”按钮，开始部署过程，会先部署Gluster再部署HostedEngine，如下：
hosted engine
选择“Run Gluster Wizard”向导，如下：
winzard
选中“Use same hostname for Storage and Public Network”，表示为存储网和管理网使用同一个网络，因为测试环境只配置了一个网卡，然后下面分别输入Host1、Host2、Host3的域名，如下<此处根据实际情况填写，应该为node100.com, node101.com, node102.com>：
hosts
Packages这一步不用配置，直接下一步即可，如下：

Volumes步骤保持默认，下一步，如下:
volumes
Bricks这一步中，Raid Type这里我们选择“JBOD”<即直通模式>，因为我们每台主机上的数据盘是单独的一块盘，如果实际环境中是多块盘做的Raid，那么就根据实际情况选择“Raid5或者Raid6”，Blacklist Gluster Devices这里默认选中即可，下面的Device Name注意要与你环境中的实际情况对应，这里默认是“/dev/sda”，和我们测试环境是对应的，sda是我们每台主机预留出来的一块用于部署Gluster的磁盘，后面的LV Size累加起来不能超过sda的实际大小，如果有SSD盘的话，可以使用下面的“Configuer LV Cache”配置缓存盘，本次测试环境中没有多余的SSD就不配置了，Device Name下的磁盘根据实际填写, LV Size按最小的磁盘总容量进行划分,如下：
devices
下面执行部署过程即可了，这里选中“Enable Debug Logging”，以方便部署失败时排查错误原因，如下:
注意在执行安装前建议查看下3个节点上的/etc/lvm/lvm.conf，大概在390行左右将filter = [“a|^/dev/disk/by-id/lvm-pv-uuid-f91KVb-cmFk-41ty-JiUE-oB6I-Tbk1-J77Y1h$|”, “r|.*|”]注释了，如下所示:
filter
gfs wizard
部署成功如下所示，点击”Continue to Hosted Engine Deployment”继续部署HostedEngine:
在这里插入图片描述
6. hosted engine部署如下,并点击下一步
fine engine
7. 配置glusterfs并点击下一步
install gfs
8. 点击”Finish Deployment”完成engine部署
gfs2
gfs3
部署成功如下所示
finish gfs
通过SSH连接engine服务器设置主机解析

[root@engine103 ~]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.5.100 node100.com
192.168.5.101 node101.com
192.168.5.102 node102.com
192.168.5.103 engine103.com

在C:\Windows\System32\drivers\etc\hosts中添加engine主机名解析

192.168.5.100 node100.com
192.168.5.101 node101.com
192.168.5.102 node102.com
192.168.5.103 engine103.com

访问engine web管理页面，下载CA证书并导入为”受信任的根证书颁发机构”

点击”管理门户”

使用admin和部署engine过程设置的密码登录
在”计算”->”主机”添加主机节点

点击“新建”按钮，进入新建主机弹出窗，在“常规”标签页面，输入要添加的主机的名称、主机名和root密码，在“承载的引擎”标签页面，选择“部署”（注意这里一定要选，否则HostedEngine管理虚机无法实现迁移和高可用），如下：

点确定时会弹出没有配置电源管理的提醒，这里先不配，直接点确定即可，生产环境中建议要配置电源管理，否则会影响高可用功能；使用同样的操作方法添加第三台主机；
查看执行任务
ssh连接node100查看hosted engine虚拟机状态

[root@node100 ~]# hosted-engine --vm-status


--== Host node100.com (id: 1) status ==--

Host ID                            : 1
Host timestamp                     : 93629
Score                              : 3400
Engine status                      : {"vm": "up", "health": "good", "detail": "Up"}
Hostname                           : node100.com
Local maintenance                  : False
stopped                            : False
crc32                              : 8a57c839
conf_on_shared_storage             : True
local_conf_timestamp               : 93629
Status up-to-date                  : True
Extra metadata (valid at timestamp):
    metadata_parse_version=1
    metadata_feature_version=1
    timestamp=93629 (Tue Mar 28 13:10:40 2023)
    host-id=1
    score=3400
    vm_conf_refresh_time=93629 (Tue Mar 28 13:10:40 2023)
    conf_on_shared_storage=True
    maintenance=False
    state=EngineUp
    stopped=False


--== Host node101.com (id: 2) status ==--

Host ID                            : 2
Host timestamp                     : 11987
Score                              : 3400
Engine status                      : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"}
Hostname                           : node101.com
Local maintenance                  : False
stopped                            : False
crc32                              : 9a1bb88d
conf_on_shared_storage             : True
local_conf_timestamp               : 11987
Status up-to-date                  : True
Extra metadata (valid at timestamp):
    metadata_parse_version=1
    metadata_feature_version=1
    timestamp=11987 (Tue Mar 28 13:10:32 2023)
    host-id=2
    score=3400
    vm_conf_refresh_time=11987 (Tue Mar 28 13:10:32 2023)
    conf_on_shared_storage=True
    maintenance=False
    state=EngineDown
    stopped=False


--== Host node102.com (id: 3) status ==--

Host ID                            : 3
Host timestamp                     : 9503
Score                              : 3400
Engine status                      : {"vm": "down", "health": "bad", "detail": "unknown", "reason": "vm not running on this host"}
Hostname                           : node102.com
Local maintenance                  : False
stopped                            : False
crc32                              : 94bb3b22
conf_on_shared_storage             : True
local_conf_timestamp               : 9503
Status up-to-date                  : True
Extra metadata (valid at timestamp):
    metadata_parse_version=1
    metadata_feature_version=1
    timestamp=9503 (Tue Mar 28 13:10:34 2023)
    host-id=3
    score=3400
    vm_conf_refresh_time=9503 (Tue Mar 28 13:10:34 2023)
    conf_on_shared_storage=True
    maintenance=False
    state=EngineDown
    stopped=False

常见问题

在安装hosted engine过程中可能会报如下错误

解决方法:
在PrepareVM过程中，到Get local VM IP这一步时，如下：

迅速在host1主机上执行（注意最后的ip地址换成你环境中hosts1的ip）:

[root@node100 ~]# ssh -L 0.0.0.0:5910:localhost:5900 192.168.5.100

需要提前安装virt-viewer,然后通过virt-viewer连接HostedEngine虚机，连接地址：vnc://192.168.0.210:5910，然后使用root帐号登录到系统中（密码为部署是所配置），将/etc/yum.repos.d/目录清空或者移动到其它目录下：
view

vnc

yum

GitCode 开源社区

旨在为数千万中国开发者提供一个无缝且高效的云端环境，以支持学习、使用和贡献开源项目。

更多推荐

GitTalk | 使用面向业务的狮偶编程语言提升开发效率

GitCode 开源社区

GitTalk | DevUI Suits 场景解决方案

GitCode 开源社区

GitTalk | DevUI Admin 前端项目构建

GitCode 开源社区

所有评论(0)

查看更多评论

charnet1019

@p243679396

已为社区贡献1条内容