Firefly-RK3288主板烧写官方ubuntu版本固件能够正常启动

但是烧写Android固件起不来，都是卡死在“Starting Kernel ...”固件版本：

Firefly-RK3288_Android5.1_201711211

Firefly-RK3288_Android5.1_201803081517

具体log如下：

U-Boot 2014.10-RK3288-10 (Nov 20 2017 - 17:19:35)

CPU: rk3288

cpu version = 0

CPU's clock information:

arm pll = 600000000HZ

periph pll = 297000000HZ

ddr pll = 200000000HZ

codec pll = 384000000HZ

Board:  Rockchip platform Board

DRAM:  Found dram banks: 1

Adding bank:0000000000000000(0000000080000000)

128 MiB

GIC CPU mask = 0x00000001

SdmmcInit = 0 400

SdmmcInit = 2 0

storage init OK!

Using default environment

GetParam

Load FDT from boot image.

power key: bank-0 pin-5

pmic:act8846

can't find dts node for pwm1

DCDC vdd_logic has been used, pwm regulator not init it.

Can't find dts node for fuel guage cw201x

SecureBootEn = 0, SecureBootLock = 0

#Boot ver: 2017-11-20#2.30

sn: 1006120000000284

checkKey

vbus = 1

no fuel gauge found

no fuel gauge found

read logo on state from dts [1]

can't find power_ctr node for lcdc0

pll_src = 1, dclk_hz = 148500000, dclk_div = 2

no fuel gauge found

got recovery cmd from misc.

ERROR: [get_entry_ram]: Cannot find logo_kernel.bmp!

Secure Boot state: 0

kernel   @ 0x02000000 (0x006a53b8)

ramdisk  @ 0x05bf0000 (0x002ad17c)

bootrk: do_bootm_linux...

Loading Device Tree to 05600000, end 0561c524 ... OK

Add bank:0000000000000000, 0000000080000000

Starting kernel ...