bugly android z自动上传符号表失败,Bugly 符号表上传错误分析+解决办法

最近发现了Bugly的符号表没有上传,追踪了下发现在Debug和Release模式都可以上传符号表,但一打包(Archive)就不会上传符号表command+9查看下日志查看日志发现接口返回报错Bugly server response: {"rtcode":0,"msg":"Success","data":{"reponseCode":"40410"}}Error: Failed to uplo

weixin_39622643

1130人浏览 · 2021-05-25 23:40:15

weixin_39622643 · 2021-05-25 23:40:15 发布

最近发现了Bugly的符号表没有上传,追踪了下发现在Debug和Release模式都可以上传符号表,但一打包(Archive)就不会上传符号表

command+9查看下日志

cd6ff0a86f1c

查看日志

发现接口返回报错

Bugly server response: {"rtcode":0,"msg":"Success","data":{"reponseCode":"40410"}}

Error: Failed to upload the zip archive file to Bugly.

cd6ff0a86f1c

经过一系列查找发现上面需要上传的DSYM压缩率为 0%

cd6ff0a86f1c

查看Run Script后发现有个压缩DSYM内的文件命令

cd6ff0a86f1c

到磁盘查找后发现该压缩文件里面的文件为0字节

cd6ff0a86f1c

解决办法一

cd6ff0a86f1c

解决办法二

不过正如作者说声只是解决燃眉之急,经过试验后发现该错误来自于最早在Xcode 9中出现的New Build System(能够大幅度提升编译速度，同时更严格地检测代码质量(循环引用等)和更友好地给出提示)导致的(Xcode10 设置为默认了),所以解决办法二出来了,更改为以前的Legacy Build System

cd6ff0a86f1c

解决办法三

不过当然苹果之所以设置为New Build System为默认,肯定比原来有所优化的,随后猜想压缩的文件之所以为0字节,是因为新的编译方式在shell脚本执行过程中原文件为0字节,还没有生成dsym数据,随后根据之前的自动配置符号表工具包里面的dSYMUpload.sh进行了更改

#!/bin/sh

# V1.4.0

# 2016.08.03

######################################################

# 1. 脚本集成到Xcode工程的Target

######################################################

# --- Copy the SCRIPT to the Run Script of Build Phases in the Xcode project ---

# #

BUGLY_APP_ID="YOUR_APP_ID"

# #

BUGLY_APP_KEY="YOUR_APP_KEY"

# #

BUNDLE_IDENTIFIER="YOUR_BUNDLE_IDENTIFIER"

# #

UPLOAD_DSYM_ONLY=1

# # 脚本默认配置的版本格式为CFBundleShortVersionString(CFBundleVersion), 如果你修改默认的版本格式, 请设置此变量, 如果不想修改, 请忽略此设置

# CUSTOMIZED_APP_VERSION=""

# # Debug模式编译是否上传，1＝上传 0＝不上传，默认不上传

# UPLOAD_DEBUG_SYMBOLS=0

# # 模拟器编译是否上传，1=上传 0=不上传，默认不上传

# UPLOAD_SIMULATOR_SYMBOLS=0

# #只有Archive操作时上传, 1=支持Archive上传 0=所有Release模式编译都上传

# UPLOAD_ARCHIVE_ONLY=0

# #

# source dSYMUpload.sh

# --- END OF SCRIPT ---

#######################################################

# 2. 脚本根据输入参数处理

#######################################################

# #命令行下输入应用基本信息, .dSYM文件的父目录路径, 输出文件目录即可

# sh dSYMUpload.sh

# #

# #注意:

# # 1. dSYMUpload.sh会调用buglySymboliOS.jar进行.dSYM解析，所以依赖Java运行时环境

# # 2. dSYMUpload.sh和buglySymboliOS.jar的文件路径需一致

# --- CONTENT OF SCRIPT ---

# Bugly服务域名

BUGLY_DSYM_UPLOAD_DOMAIN="api.bugly.qq.com"

# 注意jar工具的路径跟dSYMUpload.sh脚本路径一致, 请务必保证jar路径的正确性

BUGLY_SYMBOL_JAR_PATH="dsymtool/buglySymboliOS.jar"

# 查找添加到系统目录的jar工具

if [ ! -f "${BUGLY_SYMBOL_JAR_PATH}" ]; then

BUGLY_SYMBOL_JAR_PATH="$HOME/bin/buglySymboliOS.jar"

# 打印错误信息

function exitWithMessage(){

echo "--------------------------------"

echo "${1}"

echo "--------------------------------"

exit ${2}

}

# 上传bSYMBOL文件

function dSYMUpload() {

P_APP_ID="$1"

P_APP_KEY="$2"

P_APP_BUNDLE_ID="$3"

P_APP_VERSION="$4"

P_BSYMBOL_ZIP_FILE="$5"

P_BSYMBOL_ZIP_FILE_NAME=${P_BSYMBOL_ZIP_FILE##*/}

P_BSYMBOL_ZIP_FILE_NAME=${P_BSYMBOL_ZIP_FILE_NAME//&/_}

P_BSYMBOL_ZIP_FILE_NAME="${P_BSYMBOL_ZIP_FILE_NAME// /_}"

DSYM_UPLOAD_URL="https://${BUGLY_DSYM_UPLOAD_DOMAIN}/openapi/file/upload/symbol?app_id=${P_APP_ID}&app_key=${P_APP_KEY}"

echo "dSYM upload url: ${DSYM_UPLOAD_URL}"

echo "-----------------------------"

STATUS=$(/usr/bin/curl -k "${DSYM_UPLOAD_URL}" --form "api_version=1" --form "app_id=${P_APP_ID}" --form "app_key=${P_APP_KEY}" --form "symbolType=2" --form "bundleId=${BUNDLE_IDENTIFIER}" --form "productVersion=${BUGLY_APP_VERSION}" --form "fileName=${P_BSYMBOL_ZIP_FILE_NAME}" --form "file=@${P_BSYMBOL_ZIP_FILE}" --verbose)

echo "-----------------------------"

UPLOAD_RESULT="FAILTURE"

echo "Bugly server response: ${STATUS}"

if [ ! "${STATUS}" ]; then

echo "Error: Failed to upload the zip archive file."

elif [[ "${STATUS}" == *"{\"reponseCode\":\"0\"}"* ]]; then

echo "Success to upload the dSYM for the app [${BUNDLE_IDENTIFIER} ${BUGLY_APP_VERSION}]"

UPLOAD_RESULT="SUCCESS"

else

echo "Error: Failed to upload the zip archive file to Bugly."

#Remove temp dSYM archive

#echo "Remove temporary zip archive: ${DSYM_ZIP_FPATH}"

#/bin/rm -f "${DSYM_ZIP_FPATH}"

if [ "$?" -ne 0 ]; then

exitWithMessage "Error: Failed to remove temporary zip archive." 0

echo "--------------------------------"

echo "${UPLOAD_RESULT} - dSYM upload complete."

if [[ "${UPLOAD_RESULT}" == "FAILTURE" ]]; then

echo "--------------------------------"

echo "Failed to upload the dSYM"

echo "Please check the script and try it again."

}

# .dSYM解析为bSYMBOL文件

function dSYMParse() {

DSYM_FILE="$1"

DSYM_SYMBOL_FILE="$2"

echo "--------------------------------"

echo "Extract symbol info from .dSYM file. to ${DSYM_SYMBOL_FILE}"

(/usr/bin/java -Xms512m -Xmx1024m -Dfile.encoding=UTF8 -jar "${BUGLY_SYMBOL_JAR_PATH}" -i "${DSYM_FILE}" -o "${DSYM_SYMBOL_FILE}" ) || exitWithMessage "Error: Failed to extract symbols." 1

echo "--------------------------------"

}

function checkCompressedSourceFile() {

SDYM_SIGLE_FILE_IS_EXIST=1

for i in {1..10}; do

sleep 1s

# 遍历目录查找当前工程名的文件

for dsymSingleFile in $(find "${dsymFile}" -name ${PRODUCT_NAME}); do

if [ -s "${dsymSingleFile}" ];then

# 压缩文件存在

SDYM_SIGLE_FILE_IS_EXIST=0

return $SDYM_SIGLE_FILE_IS_EXIST

done

return $SDYM_SIGLE_FILE_IS_EXIST

}

# 执行

function run() {

CONFIG_BUGLY_APP_ID="$1"

CONFIG_BUGLY_APP_KEY="$2"

CONFIG_BUGLY_APP_BUNDLE_IDENTIFIER="$3"

CONFIG_BUGLY_APP_VERSION="$4"

CONFIG_DSYM_SOURCE_DIR="$5"

CONFIG_DSYM_DEST_DIR="$6"

CONFIG_UPLOAD_DSYM_ONLY="$7"

# 检查必须参数是否设置

if [ ! "${CONFIG_BUGLY_APP_ID}" ]; then

exitWithMessage "Error: Bugly App ID not defined. Please set 'BUGLY_APP_ID' " 0

if [[ "${CONFIG_BUGLY_APP_ID}" == *"App ID"* ]]; then

exitWithMessage "Error: Bugly App ID not defined." 0

if [ ! "${CONFIG_BUGLY_APP_KEY}" ]; then

exitWithMessage "Error: Bugly App Key not defined." 0

if [ ! "${CONFIG_BUGLY_APP_BUNDLE_IDENTIFIER}" ]; then

exitWithMessage "Error: Bundle Identifier not defined." 0

if [ ! "${CONFIG_BUGLY_APP_VERSION}" ]; then

exitWithMessage "Error: App Version not defined." 0

if [ ! -e "${CONFIG_DSYM_SOURCE_DIR}" ]; then

exitWithMessage "Error: Invalid dir ${CONFIG_DSYM_SOURCE_DIR}" 0

if [ ! "${CONFIG_DSYM_DEST_DIR}" ]; then

exitWithMessage "Error: Invalid dir ${CONFIG_DSYM_DEST_DIR}" 0

if [ ! -e "${CONFIG_DSYM_DEST_DIR}" ]; then

mkdir ${CONFIG_DSYM_DEST_DIR}

DSYM_FOLDER="${CONFIG_DSYM_SOURCE_DIR}"

IFS=$'\n'

echo "Scaning dSYM FOLDER: ${DSYM_FOLDER} ..."

RET="F"

for dsymFile in $(find "$DSYM_FOLDER" -name '*.dSYM'); do

RET="T"

echo "Found dSYM file: $dsymFile"

DSYM_FILE_NAME=${dsymFile##*/}

DSYM_SYMBOL_ZIP_FILE_NAME="${DSYM_FILE_NAME}.zip"

DSYM_SYMBOL_ZIP_FILE_NAME="${DSYM_SYMBOL_ZIP_FILE_NAME// /_}"

DSYM_SYMBOL_ZIP_FILE=${CONFIG_DSYM_DEST_DIR}/${DSYM_SYMBOL_ZIP_FILE_NAME}

if [ $CONFIG_UPLOAD_DSYM_ONLY -eq 1 ]; then

if [ -e $DSYM_SYMBOL_ZIP_FILE ]; then

rm -f $DSYM_SYMBOL_ZIP_FILE

# 判断压缩文件的源文件是否存在

SDYM_SINGLE_FILE_NAME="${dsymFile}/Contents/Resources/DWARF/${PRODUCT_NAME}"

checkCompressedSourceFile $SDYM_SINGLE_FILE_NAME

if [ $? == 1 ];then

exitWithMessage "NO file found in ${SDYM_SINGLE_FILE_NAME}" 0

# 如果只上传dSYM，直接压缩dSYM目录

zip -r -j $DSYM_SYMBOL_ZIP_FILE $dsymFile -x *.plist

else

# 使用符号表工具来生成Symbol文件

dSYMParse $dsymFile $DSYM_SYMBOL_ZIP_FILE

# 上传

dSYMUpload $CONFIG_BUGLY_APP_ID $CONFIG_BUGLY_APP_KEY $CONFIG_BUGLY_APP_BUNDLE_IDENTIFIER $CONFIG_BUGLY_APP_VERSION $DSYM_SYMBOL_ZIP_FILE

done

if [ $RET = "F" ]; then

exitWithMessage "No .dSYM found in ${DSYM_FOLDER}" 0

}

# 在Xcode工程中执行

function runInXcode(){

echo "Uploading dSYM to Bugly in Xcode ..."

echo "Info.Plist : ${INFOPLIST_FILE}"

BUNDLE_VERSION=$(/usr/libexec/PlistBuddy -c 'Print CFBundleVersion' "${INFOPLIST_FILE}")

BUNDLE_SHORT_VERSION=$(/usr/libexec/PlistBuddy -c 'Print CFBundleShortVersionString' "${INFOPLIST_FILE}")

# 组装Bugly默认识别的版本信息(格式为CFBundleShortVersionString(CFBundleVersion), 例如: 1.0(1))

if [ ! "${CUSTOMIZED_APP_VERSION}" ]; then

BUGLY_APP_VERSION="${BUNDLE_SHORT_VERSION}(${BUNDLE_VERSION})"

else

BUGLY_APP_VERSION="${CUSTOMIZED_APP_VERSION}"

echo "--------------------------------"

echo "Prepare application information."

echo "--------------------------------"

echo "Product Name: ${PRODUCT_NAME}"

echo "Bundle Identifier: ${BUNDLE_IDENTIFIER}"

echo "Version: ${BUNDLE_SHORT_VERSION}"

echo "Build: ${BUNDLE_VERSION}"

echo "Bugly App ID: ${BUGLY_APP_ID}"

echo "Bugly App key: ${BUGLY_APP_KEY}"

echo "Bugly App Version: ${BUGLY_APP_VERSION}"

echo "--------------------------------"

echo "Check the arguments ..."

##检查模拟器编译是否允许上传符号

if [ "$EFFECTIVE_PLATFORM_NAME" == "-iphonesimulator" ]; then

if [ $UPLOAD_SIMULATOR_SYMBOLS -eq 0 ]; then

exitWithMessage "Warning: Build for simulator and skipping to upload. \nYou can modify 'UPLOAD_SIMULATOR_SYMBOLS' to 1 in the script." 0

##检查是否是Release模式编译

if [ "${CONFIGURATION=}" == "Debug" ]; then

if [ $UPLOAD_DEBUG_SYMBOLS -eq 0 ]; then

exitWithMessage "Warning: Build for debug mode and skipping to upload. \nYou can modify 'UPLOAD_DEBUG_SYMBOLS' to 1 in the script." 0

##检查是否Archive操作

if [ $UPLOAD_ARCHIVE_ONLY -eq 1 ]; then

if [[ "$TARGET_BUILD_DIR" == *"/Archive"* ]]; then

echo "Archive the package"

else

exitWithMessage "Warning: Build for NOT Archive mode and skipping to upload. \nYou can modify 'UPLOAD_ARCHIVE_ONLY' to 0 in the script." 0

run ${BUGLY_APP_ID} ${BUGLY_APP_KEY} ${BUNDLE_IDENTIFIER} ${BUGLY_APP_VERSION} ${DWARF_DSYM_FOLDER_PATH} ${BUILD_DIR}/BuglySymbolTemp ${UPLOAD_DSYM_ONLY}

}

# 根据Xcode的环境变量判断是否处于Xcode环境

INFO_PLIST_FILE="${INFOPLIST_FILE}"

BuildInXcode="F"

if [ -f "${INFO_PLIST_FILE}" ]; then

BuildInXcode="T"

if [ $BuildInXcode = "T" ]; then

runInXcode

else

echo "\nUsage: dSYMUpload.sh [upload_dsym_only]\n"

# 你可以在此处直接设置BuglyAppID和BuglyAppKey，排除不常变参数的输入

BUGLY_APP_ID="$1"