面我已经写过一篇SpringBoot+Nacos+Seata实现Dubbo分布式事务管理的文章，今天为什么还要写这篇呢，是因为好多公司还在用Zookeeper作为Dubbo的注册中心和配置中心在大规模使用，还没有完全迁移到Nacos上来，所以Seata的注册中心和配置也是支持Zookeeper，但是官方没有完整的使用教程，因此，写这篇主要为了帮助使用Zookeeper的用户也可以轻松使用Seata。

1.简介

本文主要介绍SpringBoot2.1.5 + Dubbo 2.7.3 + Mybatis 3.4.2 + Zookeeper 3.4.14 +Seata 0.9.0整合来实现Dubbo分布式事务管理，使用Zookeeper 作为 Dubbo和Seata的注册中心和配置中心,使用 MySQL 数据库和 MyBatis来操作数据。

如果你还对SpringBoot、Dubbo、Zookeeper、Seata、Mybatis 不是很了解的话，这里我为大家整理个它们的官网网站，如下

在这里我们就不一个一个介绍它们是怎么使用和原理，详细请学习官方文档，在这里我将开始对它们进行整合，完成一个简单的案例，来让大家了解Seata来实现Dubbo分布式事务管理的基本流程。

2.环境准备

2.1 下载Zookeeper并安装启动

Zookeeper下载：https://archive.apache.org/dist/zookeeper/zookeeper-3.4.14/

Zookeeper 快速入门：http://zookeeper.apache.org/doc/r3.4.14/zookeeperStarted.html

在单机模式下启动Zookeeper非常简单。
我们将下载的文件解压缩到指定目录如：E:\tools\zookeeper-3.4.14在这里插入图片描述
要启动Zookeeper，我们需要一个配置文件。下面是一个示例，在conf/zoo.cfg:

tickTime=2000
initLimit=10
syncLimit=5
clientPort=2181
dataDir=E:\\tools\\zookeeper-3.4.14\\data
dataLogDir=E:\\tools\\zookeeper-3.4.14\\logs

以上配置的详细说明如下：

  • tickTime：用于配置 ZooKeeper 中最小时间单位的长度，很多运行时的时间间隔都是使用 tickTime 的倍数来表示的。例如，ZooKeeper 中会话的最小超时时间默认是 2*tickTime。

  • initLimit：该参数有默认值: 10，即表示是参数 tickTime 值得10倍，必须配置，且需要配置一个正整数，不支持系统属性方式配置。该参数用于配置 Leader 服务器等待 Follower 启动，并完成数据同步的时间。Follwer 服务器再启动过程中，会与 Leader 建立连接并完成对数据的同步，从而确定自己对外提供服务的其实状态。Leader 服务器允许 Follower 在 initLimit 时间内完成这个工作。 通常情况下，运维人员不用太在意这个参数的配置，使用默认值即可。但如果随着 ZooKeeper 集群管理的数据量增大，Follower 服务器再启动的时候，从 Leader 上进行同步数据的时间也会相应变长，于是无法在较短的时间完成数据同步。因此，在这种情况下，有必要适当调大这个参数。

  • syncLimit:该参数有默认值: 5，即表示参数 tickTime 值得5倍，必须配置，且需要配置一个正整数，不支持系统属性配置。该参数用于配置 Leader 服务器和 Follower 服务器之间进行心跳检测的最大延时时间。在 ZooKeeper 集群运行过程中，Leader 服务器会与所有的 Follower 进行心跳检测来确定该服务器是否存活。如果 Leader 服务器再 syncLimit 时间内无法获取到 Follower 的心跳检测响应，那么 Leader 就会认为该 Follower 已经脱离了和自己的同步。通常情况下，运维人员使用该参数的默认值即可，但如果部署ZooKeeper 集群的网络环境质量较低（例如网络延时较大或丢包严重），那么可以适当调大这个参数。

  • dataDir: 该参数有默认值: dataDir，可以不配置，不支持系统属性方式配置。参数 dataLogDir 用于配置 ZooKeeper 服务器存储事务日志文件的目录。默认情况下，ZooKeeper 会将事务日志文件和快照数据存储在同一目录中，应该尽量将这两者的牧区区分开来。另外，如果条件允许，可以将事务日志的存储位置配置在一个单独的磁盘上。事务日志记录对于磁盘的性能要求非常高，为了保证数据的一致性，ZooKeeper 在返回客户端事务请求相应之前，必须将本次请求对应的事务日志写入到磁盘中。因此，事务日志写入的性能直接决定了 ZooKeeper 在处理事务请求时的吞吐。针对同一块磁盘的其他并发读写操作（例如 ZooKeeper 运行时日志输出和操作系统自身的读写等），尤其是数据快照操作，会极大地影响事务日志的写性能。因此尽量给事务日志的输出配置一个单独的磁盘或挂载点，将极大地提升 ZooKeeper 的整体性能。

  • clientPort :用于配置当前服务器对外的服务端口，客户端会通过该端口和 ZooKeeper 服务器创建连接，一般设置为2181。每台 ZooKeeper 都可以配置任意可用的端口，同时集群中的所有服务器不需要保持 clientPort 端口一致。该参数无默认值，必须配置。

  • dataLogDir:存储日志的目录

启动Zookeeper：

bin/zkServer.cmd start

在这里插入图片描述
这是时候ZooKeeper 服务就正常启动了。

我们可以使客户端去来连接

bin/zkCli.cmd

在这里插入图片描述

ZooKeeper -server host:port cmd args

   stat path [watch]
        set path data [version]
        ls path [watch]
        delquota [-n|-b] path
        ls2 path [watch]
        setAcl path acl
        setquota -n|-b val path
        history
        redo cmdno
        printwatches on|off
        delete path [version]
        sync path
        listquota path
        rmr path
        get path [watch]
        create [-s] [-e] path data acl
        addauth scheme auth
        quit
        getAcl path
        close
        connect host:port

我们是用ls查询节点情况

ls /

在这里插入图片描述
默认有一个zookeeoer节点。

2.2 下载seata0.9.0 并安装启动

2.2.1 在 Seata Release 下载最新版的 Seata Server 并解压得到如下目录：
.
├──bin
├──conf
└──lib
2.2.2 修改 conf/registry.conf 和file.conf配置，

目前seata支持如下的file、nacos 、apollo、zk、consul的注册中心和配置中心。这里我们以zk 为例。
将 type 改为 zk

registry {
  # file zk
  type = "zk"

 zk {
    cluster = "default"
    serverAddr = "127.0.0.1:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }
  file {
    name = "file.conf"
  }
}

config {
  # file、nacos 、apollo、zk、consul
  type = "zk"

  zk {
    serverAddr = "127.0.0.1:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }

  file {
    name = "file.conf"
  }
}
  • serverAddr = “127.0.0.1:2181” ：zk 的地址
  • cluster = “default” ：集群设置为默认 default
  • session.timeout = 6000 ：会话的超时时间
  • connect.timeout = 2000：连接的超时时间

file.conf 配置

transport {
  # tcp udt unix-domain-socket
  type = "TCP"
  #NIO NATIVE
  server = "NIO"
  #enable heartbeat
  heartbeat = true
  #thread factory for netty
  thread-factory {
    boss-thread-prefix = "NettyBoss"
    worker-thread-prefix = "NettyServerNIOWorker"
    server-executor-thread-prefix = "NettyServerBizHandler"
    share-boss-worker = false
    client-selector-thread-prefix = "NettyClientSelector"
    client-selector-thread-size = 1
    client-worker-thread-prefix = "NettyClientWorkerThread"
    # netty boss thread size,will not be used for UDT
    boss-thread-size = 1
    #auto default pin or 8
    worker-thread-size = 8
  }
  shutdown {
    # when destroy server, wait seconds
    wait = 3
  }
  serialization = "seata"
  compressor = "none"
}
service {
  #vgroup->rgroup
  vgroup_mapping.my_test_tx_group = "default"
  #only support single node
  default.grouplist = "127.0.0.1:8091"
  #degrade current not support
  enableDegrade = false
  #disable
  disable = false
  #unit ms,s,m,h,d represents milliseconds, seconds, minutes, hours, days, default permanent
  max.commit.retry.timeout = "-1"
  max.rollback.retry.timeout = "-1"
}

client {
  async.commit.buffer.limit = 10000
  lock {
    retry.internal = 10
    retry.times = 30
  }
  report.retry.count = 5
  tm.commit.retry.count = 1
  tm.rollback.retry.count = 1
}

## transaction log store
store {
  ## store mode: file、db
  mode = "db"

  ## file store
  file {
    dir = "sessionStore"

    # branch session size , if exceeded first try compress lockkey, still exceeded throws exceptions
    max-branch-session-size = 16384
    # globe session size , if exceeded throws exceptions
    max-global-session-size = 512
    # file buffer size , if exceeded allocate new buffer
    file-write-buffer-cache-size = 16384
    # when recover batch read size
    session.reload.read_size = 100
    # async, sync
    flush-disk-mode = async
  }

  ## database store
  db {
    ## the implement of javax.sql.DataSource, such as DruidDataSource(druid)/BasicDataSource(dbcp) etc.
    datasource = "dbcp"
    ## mysql/oracle/h2/oceanbase etc.
    db-type = "mysql"
    driver-class-name = "com.mysql.jdbc.Driver"
    url = "jdbc:mysql://127.0.0.1:3306/seata"
    user = "root"
    password = "123456"
    min-conn = 1
    max-conn = 3
    global.table = "global_table"
    branch.table = "branch_table"
    lock-table = "lock_table"
    query-limit = 100
  }
}
lock {
  ## the lock store mode: local、remote
  mode = "remote"

  local {
    ## store locks in user's database
  }

  remote {
    ## store locks in the seata's server
  }
}
recovery {
  #schedule committing retry period in milliseconds
  committing-retry-period = 1000
  #schedule asyn committing retry period in milliseconds
  asyn-committing-retry-period = 1000
  #schedule rollbacking retry period in milliseconds
  rollbacking-retry-period = 1000
  #schedule timeout retry period in milliseconds
  timeout-retry-period = 1000
}

transaction {
  undo.data.validation = true
  undo.log.serialization = "jackson"
  undo.log.save.days = 7
  #schedule delete expired undo_log in milliseconds
  undo.log.delete.period = 86400000
  undo.log.table = "undo_log"
}

## metrics settings
metrics {
  enabled = false
  registry-type = "compact"
  # multi exporters use comma divided
  exporter-list = "prometheus"
  exporter-prometheus-port = 9898
}

support {
  ## spring
  spring {
    # auto proxy the DataSource bean
    datasource.autoproxy = false
  }
}

主要修改了store.mode为db,还有数据库相关的配置

2.2.3 修改 conf/nacos-config.txt配置为zk-config.properties
transport.type=TCP
transport.server=NIO
transport.heartbeat=true
transport.thread-factory.boss-thread-prefix=NettyBoss
transport.thread-factory.worker-thread-prefix=NettyServerNIOWorker
transport.thread-factory.server-executor-thread-prefix=NettyServerBizHandler
transport.thread-factory.share-boss-worker=false
transport.thread-factory.client-selector-thread-prefix=NettyClientSelector
transport.thread-factory.client-selector-thread-size=1
transport.thread-factory.client-worker-thread-prefix=NettyClientWorkerThread
transport.thread-factory.boss-thread-size=1
transport.thread-factory.worker-thread-size=8
transport.shutdown.wait=3
service.vgroup_mapping.order-service-seata-service-group=default
service.vgroup_mapping.account-service-seata-service-group=default
service.vgroup_mapping.storage-service-seata-service-group=default
service.vgroup_mapping.business-service-seata-service-group=default
service.enableDegrade=false
service.disable=false
service.max.commit.retry.timeout=-1
service.max.rollback.retry.timeout=-1
client.async.commit.buffer.limit=10000
client.lock.retry.internal=10
client.lock.retry.times=30
store.mode=db
store.file.dir=file_store/data
store.file.max-branch-session-size=16384
store.file.max-global-session-size=512
store.file.file-write-buffer-cache-size=16384
store.file.flush-disk-mode=async
store.file.session.reload.read_size=100
store.db.driver-class-name=com.mysql.jdbc.Driver
store.db.datasource=dbcp
store.db.db-type=mysql
store.db.url=jdbc:mysql://127.0.0.1:3306/seata?useUnicode=true
store.db.user=root
store.db.password=123456
store.db.min-conn=1
store.db.max-conn=3
store.db.global.table=global_table
store.db.branch.table=branch_table
store.db.query-limit=100
store.db.lock-table=lock_table
recovery.committing-retry-period=1000
recovery.asyn-committing-retry-period=1000
recovery.rollbacking-retry-period=1000
recovery.timeout-retry-period=1000
transaction.undo.data.validation=true
transaction.undo.log.serialization=jackson
transaction.undo.log.save.days=7
transaction.undo.log.delete.period=86400000
transaction.undo.log.table=undo_log
transport.serialization=seata
transport.compressor=none
metrics.enabled=false
metrics.registry-type=compact
metrics.exporter-list=prometheus
metrics.exporter-prometheus-port=9898
client.report.retry.count=5
service.disableGlobalTransaction=false

这里主要修改了如下几项：

  • store.mode :存储模式 默认file 这里我修改为db 模式 ，并且需要三个表global_table、branch_table和lock_table
  • store.db.driver-class-name： 默认没有，会报错。添加了 com.mysql.jdbc.Driver
  • store.db.datasource=dbcp ：数据源 dbcp
  • store.db.db-type=mysql : 存储数据库的类型为mysql
  • store.db.url=jdbc:mysql://127.0.0.1:3306/seata?useUnicode=true : 修改为自己的数据库url、port、数据库名称
  • store.db.user=root :数据库的账号
  • store.db.password=123456 :数据库的密码
  • service.vgroup_mapping.order-service-seata-service-group=default
  • service.vgroup_mapping.account-service-seata-service-group=default
  • service.vgroup_mapping.storage-service-seata-service-group=default
  • service.vgroup_mapping.business-service-seata-service-group=default

db模式下的所需的三个表的数据库脚本位于seata\conf\db_store.sql

global_table的表结构

CREATE TABLE `global_table` (
  `xid` varchar(128) NOT NULL,
  `transaction_id` bigint(20) DEFAULT NULL,
  `status` tinyint(4) NOT NULL,
  `application_id` varchar(64) DEFAULT NULL,
  `transaction_service_group` varchar(64) DEFAULT NULL,
  `transaction_name` varchar(64) DEFAULT NULL,
  `timeout` int(11) DEFAULT NULL,
  `begin_time` bigint(20) DEFAULT NULL,
  `application_data` varchar(2000) DEFAULT NULL,
  `gmt_create` datetime DEFAULT NULL,
  `gmt_modified` datetime DEFAULT NULL,
  PRIMARY KEY (`xid`),
  KEY `idx_gmt_modified_status` (`gmt_modified`,`status`),
  KEY `idx_transaction_id` (`transaction_id`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

branch_table的表结构

CREATE TABLE `branch_table` (
  `branch_id` bigint(20) NOT NULL,
  `xid` varchar(128) NOT NULL,
  `transaction_id` bigint(20) DEFAULT NULL,
  `resource_group_id` varchar(32) DEFAULT NULL,
  `resource_id` varchar(256) DEFAULT NULL,
  `lock_key` varchar(128) DEFAULT NULL,
  `branch_type` varchar(8) DEFAULT NULL,
  `status` tinyint(4) DEFAULT NULL,
  `client_id` varchar(64) DEFAULT NULL,
  `application_data` varchar(2000) DEFAULT NULL,
  `gmt_create` datetime DEFAULT NULL,
  `gmt_modified` datetime DEFAULT NULL,
  PRIMARY KEY (`branch_id`),
  KEY `idx_xid` (`xid`)
) ENGINE=InnoDB DEFAULT CHARSET=utf8mb4;

lock_table的表结构

create table `lock_table` (
  `row_key` varchar(128) not null,
  `xid` varchar(96),
  `transaction_id` long ,
  `branch_id` long,
  `resource_id` varchar(256) ,
  `table_name` varchar(32) ,
  `pk` varchar(32) ,
  `gmt_create` datetime ,
  `gmt_modified` datetime,
  primary key(`row_key`)
);
2.2.4 将 Seata 配置添加到 Zookeeper 中

用于官方只提供了nacos的脚本配置。我这用java实现了将 Seata 配置添加到 Zookeeper 中。
我这里参考了ZookeeperConfiguration的源码实现的导入到zk的初始化代码。
在这里插入图片描述
通过查看以上源代码我们可以看出
zk模式下数据的存储格式。并且使用的zk的永久节点存储。

注意：seata1.0 开始，提供了Zookeeper配置中心的配置脚本https://github.com/seata/seata/blob/develop/script/config-center/zk/

2.4.2.1.创建根节点，其中根节点为/config

注意：seata1.0 开始，Zookeeper配置中心的根节点不再是/config,而是/seata。如果还想使用java代码导入配置到zk中,需将代码中的/config替换为/seata !!!

public ZookeeperConfiguration() {
        if (zkClient == null) {
            Class var1 = ZookeeperConfiguration.class;
            synchronized(ZookeeperConfiguration.class) {
                if (null == zkClient) {
                    zkClient = new ZkClient(FILE_CONFIG.getConfig("config.zk.serverAddr"), FILE_CONFIG.getInt("config.zk.session.timeout", 6000), FILE_CONFIG.getInt("config.zk.connect.timeout", 2000));
                }
            }

            if (!zkClient.exists("/config")) {
                zkClient.createPersistent("/config", true);
            }
        }

    }
2.4.2.2添加配置的方法
public boolean putConfig(final String dataId, final String content, long timeoutMills) {
        FutureTask<Boolean> future = new FutureTask(new Callable<Boolean>() {
            public Boolean call() throws Exception {
                String path = "/config/" + dataId;
                if (!ZookeeperConfiguration.zkClient.exists(path)) {
                    ZookeeperConfiguration.zkClient.create(path, content, CreateMode.PERSISTENT);
                } else {
                    ZookeeperConfiguration.zkClient.writeData(path, content);
                }

                return true;
            }
        });
        CONFIG_EXECUTOR.execute(future);

        try {
            return (Boolean)future.get(timeoutMills, TimeUnit.MILLISECONDS);
        } catch (Exception var7) {
            LOGGER.warn("putConfig {} : {} is error or timeout", dataId, content);
            return false;
        }
    }
2.4.2.3 使用java读取zk-config.properties配置文件
package io.seata.samples.integration.call;

import lombok.extern.slf4j.Slf4j;
import org.I0Itec.zkclient.ZkClient;
import org.apache.zookeeper.CreateMode;
import org.springframework.util.ResourceUtils;

import java.io.File;
import java.io.FileInputStream;
import java.io.IOException;
import java.io.InputStream;
import java.util.Properties;
import java.util.Set;

/**
 * 
 */
@Slf4j
public class ZkDataInit {

    private static volatile ZkClient zkClient;

    public static void main(String[] args) {
        if (zkClient == null) {
            zkClient = new ZkClient("127.0.0.1:2181", 6000, 2000);
        }
        if (!zkClient.exists("/config")) {
            zkClient.createPersistent("/config", true);
        }
        //获取key对应的value值
        Properties properties = new Properties();
        // 使用ClassLoader加载properties配置文件生成对应的输入流
        // 使用properties对象加载输入流
        try {
            File file = ResourceUtils.getFile("classpath:zk-config.properties");
            InputStream in = new FileInputStream(file);
            properties.load(in);
            Set<Object> keys = properties.keySet();//返回属性key的集合
            for (Object key : keys) {
                boolean b = putConfig(key.toString(), properties.get(key).toString());
                log.info(key.toString() + "=" + properties.get(key)+"result="+b);
            }
        } catch (IOException e) {
            e.printStackTrace();
        }
    }

    /**
     *
     * @param dataId
     * @param content
     * @return
     */
    public static boolean putConfig(final String dataId, final String content) {
        Boolean flag = false;
        String path = "/config/" + dataId;
        if (!zkClient.exists(path)) {
            zkClient.create(path, content, CreateMode.PERSISTENT);
            flag = true;
        } else {
            zkClient.writeData(path, content);
            flag = true;
        }
        return flag;
    }
}
2.4.2.4 查看zk的节点结构

注意：seata1.0使用 ls /seata 命令查看节点信息

[zk: localhost:2181(CONNECTED) 3] ls /config
[metrics.exporter-prometheus-port, store.file.session.reload.read_size, recovery
.committing-retry-period, store.db.lock-table, store.db.datasource, transport.th
read-factory.client-selector-thread-prefix, transaction.undo.log.save.days, metr
ics.exporter-list, transport.server, client.async.commit.buffer.limit, store.fil
e.max-branch-session-size, transport.thread-factory.client-selector-thread-size,
 transaction.undo.log.delete.period, transaction.undo.data.validation, service.d
isableGlobalTransaction, transport.thread-factory.boss-thread-size, client.lock.
retry.times, service.max.commit.retry.timeout, store.db.driver-class-name, store
.file.flush-disk-mode, transport.thread-factory.worker-thread-size, store.mode,
transport.serialization, transport.thread-factory.client-worker-thread-prefix, s
tore.file.dir, recovery.rollbacking-retry-period, store.db.query-limit, transpor
t.compressor, store.db.url, store.db.user, recovery.timeout-retry-period, servic
e.disable, store.db.db-type, client.report.retry.count, store.file.file-write-bu
ffer-cache-size, transaction.undo.log.table, client.lock.retry.internal, transac
tion.undo.log.serialization, recovery.asyn-committing-retry-period, metrics.enab
led, store.db.password, transport.thread-factory.worker-thread-prefix, transport
.thread-factory.boss-thread-prefix, service.vgroup_mapping.storage-service-seata
-service-group, service.vgroup_mapping.order-service-seata-service-group, store.
db.global.table, store.db.branch.table, service.vgroup_mapping.account-service-s
eata-service-group, service.vgroup_mapping.business-service-seata-service-group,
 service.max.rollback.retry.timeout, service.enableDegrade, store.file.max-globa
l-session-size, transport.type, store.db.max-conn, transport.thread-factory.shar
e-boss-worker, transport.thread-factory.server-executor-thread-prefix, metrics.r
egistry-type, transport.heartbeat, transport.shutdown.wait, store.db.min-conn]

所有的配置都已经导入成功。

2.2.5 启动 Seata Server

使用db 模式启动

 cd ..
bin/seata-server.bat -m db

这时候在 zookeeper 的我们在客户端可以使使用命令查询节点

[zk: localhost:2181(CONNECTED) 4] ls /
registry    zookeeper   config
[zk: localhost:2181(CONNECTED) 4] ls /registry/zk/default
[192.168.10.108:8091]

看到这，seata server就已经搭建成功

3 案例分析

参考官网中用户购买商品的业务逻辑。整个业务逻辑由4个微服务提供支持：

  • 库存服务：扣除给定商品的存储数量。
  • 订单服务：根据购买请求创建订单。
  • 帐户服务：借记用户帐户的余额。
  • 业务服务：处理业务逻辑。

请求逻辑架构
在这里插入图片描述

3.1 github地址

springboot-dubbo-seata：https://github.com/lidong1665/springboot-dubbo-seata-zk

  • samples-common ：公共模块

  • samples-account ：用户账号模块

  • samples-order ：订单模块

  • samples-storage ：库存模块

  • samples-business ：业务模块

3.2 账户服务：AccountDubboService
/**
 * @Author: lidong
 * @Description  账户服务接口
 * @Date Created in 2019/9/5 16:37
 */
public interface AccountDubboService {

    /**
     * 从账户扣钱
     */
    ObjectResponse decreaseAccount(AccountDTO accountDTO);
}
3.3 订单服务：OrderDubboService
/**
 * @Author: lidong
 * @Description  订单服务接口
 * @Date Created in 2019/9/5 16:28
 */
public interface OrderDubboService {

    /**
     * 创建订单
     */
    ObjectResponse<OrderDTO> createOrder(OrderDTO orderDTO);
}
3.4 库存服务：StorageDubboService
/**
 * @Author: lidong
 * @Description  库存服务
 * @Date Created in 2019/9/5 16:22
 */
public interface StorageDubboService {

    /**
     * 扣减库存
     */
    ObjectResponse decreaseStorage(CommodityDTO commodityDTO);
}
3.5 业务服务：BusinessService

/**
 * @Author: lidong
 * @Description
 * @Date Created in 2019/9/5 17:17
 */
public interface BusinessService {

    /**
     * 出处理业务服务
      * @param businessDTO
     * @return
     */
    ObjectResponse handleBusiness(BusinessDTO businessDTO);
}

业务逻辑的具体实现主要体现在 订单服务的实现和业务服务的实现

订单服务的实现

@Service
public class TOrderServiceImpl extends ServiceImpl<TOrderMapper, TOrder> implements ITOrderService {

    @Reference(version = "1.0.0")
    private AccountDubboService accountDubboService;

    /**
     * 创建订单
     * @Param:  OrderDTO  订单对象
     * @Return:  OrderDTO  订单对象
     */
    @Override
    public ObjectResponse<OrderDTO> createOrder(OrderDTO orderDTO) {
        ObjectResponse<OrderDTO> response = new ObjectResponse<>();
        //扣减用户账户
        AccountDTO accountDTO = new AccountDTO();
        accountDTO.setUserId(orderDTO.getUserId());
        accountDTO.setAmount(orderDTO.getOrderAmount());
        ObjectResponse objectResponse = accountDubboService.decreaseAccount(accountDTO);

        //生成订单号
        orderDTO.setOrderNo(UUID.randomUUID().toString().replace("-",""));
        //生成订单
        TOrder tOrder = new TOrder();
        BeanUtils.copyProperties(orderDTO,tOrder);
        tOrder.setCount(orderDTO.getOrderCount());
        tOrder.setAmount(orderDTO.getOrderAmount().doubleValue());
        try {
            baseMapper.createOrder(tOrder);
        } catch (Exception e) {
            response.setStatus(RspStatusEnum.FAIL.getCode());
            response.setMessage(RspStatusEnum.FAIL.getMessage());
            return response;
        }

        if (objectResponse.getStatus() != 200) {
            response.setStatus(RspStatusEnum.FAIL.getCode());
            response.setMessage(RspStatusEnum.FAIL.getMessage());
            return response;
        }

        response.setStatus(RspStatusEnum.SUCCESS.getCode());
        response.setMessage(RspStatusEnum.SUCCESS.getMessage());
        return response;
    }
}

整个业务的实现逻辑

@Service
@Slf4j
public class BusinessServiceImpl implements BusinessService{

    @Reference(version = "1.0.0")
    private StorageDubboService storageDubboService;

    @Reference(version = "1.0.0")
    private OrderDubboService orderDubboService;

    private boolean flag;

    /**
     * 处理业务逻辑
     * @Param:
     * @Return:
     */

    @GlobalTransactional(timeoutMills = 300000, name = "dubbo-gts-seata-example")
    @Override
    public ObjectResponse handleBusiness(BusinessDTO businessDTO) {
        log.info("开始全局事务，XID = " + RootContext.getXID());
        ObjectResponse<Object> objectResponse = new ObjectResponse<>();
        //1、扣减库存
        CommodityDTO commodityDTO = new CommodityDTO();
        commodityDTO.setCommodityCode(businessDTO.getCommodityCode());
        commodityDTO.setCount(businessDTO.getCount());
        ObjectResponse storageResponse = storageDubboService.decreaseStorage(commodityDTO);
        //2、创建订单
        OrderDTO orderDTO = new OrderDTO();
        orderDTO.setUserId(businessDTO.getUserId());
        orderDTO.setCommodityCode(businessDTO.getCommodityCode());
        orderDTO.setOrderCount(businessDTO.getCount());
        orderDTO.setOrderAmount(businessDTO.getAmount());
        ObjectResponse<OrderDTO> response = orderDubboService.createOrder(orderDTO);

        //打开注释测试事务发生异常后，全局回滚功能
//        if (!flag) {
//            throw new RuntimeException("测试抛异常后，分布式事务回滚！");
//        }

        if (storageResponse.getStatus() != 200 || response.getStatus() != 200) {
            throw new DefaultException(RspStatusEnum.FAIL);
        }

        objectResponse.setStatus(RspStatusEnum.SUCCESS.getCode());
        objectResponse.setMessage(RspStatusEnum.SUCCESS.getMessage());
        objectResponse.setData(response.getData());
        return objectResponse;
    }
}

3.6 使用seata的分布式事务解决方案处理dubbo的分布式事务

在这里插入图片描述

我们只需要在业务处理的方法handleBusiness添加一个注解 @GlobalTransactional

@GlobalTransactional(timeoutMills = 300000, name = "dubbo-gts-seata-example")
    @Override
    public ObjectResponse handleBusiness(BusinessDTO businessDTO) {
    
    }
  • timeoutMills: 超时时间
  • name ：事务名称

3.7 准备数据库

注意: MySQL必须使用InnoDB engine.

创建数据库 并导入数据库脚本

DROP DATABASE IF EXISTS seata;
CREATE DATABASE seata;
USE seata;

DROP TABLE IF EXISTS `t_account`;
CREATE TABLE `t_account` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `user_id` varchar(255) DEFAULT NULL,
  `amount` double(14,2) DEFAULT '0.00',
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=2 DEFAULT CHARSET=utf8;

-- ----------------------------
-- Records of t_account
-- ----------------------------
INSERT INTO `t_account` VALUES ('1', '1', '4000.00');

-- ----------------------------
-- Table structure for t_order
-- ----------------------------
DROP TABLE IF EXISTS `t_order`;
CREATE TABLE `t_order` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `order_no` varchar(255) DEFAULT NULL,
  `user_id` varchar(255) DEFAULT NULL,
  `commodity_code` varchar(255) DEFAULT NULL,
  `count` int(11) DEFAULT '0',
  `amount` double(14,2) DEFAULT '0.00',
  PRIMARY KEY (`id`)
) ENGINE=InnoDB AUTO_INCREMENT=64 DEFAULT CHARSET=utf8;

-- ----------------------------
-- Records of t_order
-- ----------------------------

-- ----------------------------
-- Table structure for t_storage
-- ----------------------------
DROP TABLE IF EXISTS `t_storage`;
CREATE TABLE `t_storage` (
  `id` int(11) NOT NULL AUTO_INCREMENT,
  `commodity_code` varchar(255) DEFAULT NULL,
  `name` varchar(255) DEFAULT NULL,
  `count` int(11) DEFAULT '0',
  PRIMARY KEY (`id`),
  UNIQUE KEY `commodity_code` (`commodity_code`)
) ENGINE=InnoDB AUTO_INCREMENT=2 DEFAULT CHARSET=utf8;

-- ----------------------------
-- Records of t_storage
-- ----------------------------
INSERT INTO `t_storage` VALUES ('1', 'C201901140001', '水杯', '1000');

-- ----------------------------
-- Table structure for undo_log
-- 注意此处0.3.0+ 增加唯一索引 ux_undo_log
-- ----------------------------
DROP TABLE IF EXISTS `undo_log`;
CREATE TABLE `undo_log` (
  `id` bigint(20) NOT NULL AUTO_INCREMENT,
  `branch_id` bigint(20) NOT NULL,
  `xid` varchar(100) NOT NULL,
  `context` varchar(128) NOT NULL,
  `rollback_info` longblob NOT NULL,
  `log_status` int(11) NOT NULL,
  `log_created` datetime NOT NULL,
  `log_modified` datetime NOT NULL,
  `ext` varchar(100) DEFAULT NULL,
  PRIMARY KEY (`id`),
  UNIQUE KEY `ux_undo_log` (`xid`,`branch_id`)
) ENGINE=InnoDB AUTO_INCREMENT=1 DEFAULT CHARSET=utf8;

-- ----------------------------
-- Records of undo_log
-- ----------------------------
SET FOREIGN_KEY_CHECKS=1;

会看到如上的4个表

+-------------------------+
| Tables_in_seata         |
+-------------------------+
| t_account               |
| t_order                 |
| t_storage               |
| undo_log                |
+-------------------------+

这里为了简化我将这个三张表创建到一个库中,使用是三个数据源来实现。

3.8 我们以账号服务samples-account为例 ，分析需要注意的配置项目

3.8.1 引入的依赖

<?xml version="1.0" encoding="UTF-8"?>
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
    <modelVersion>4.0.0</modelVersion>
    <parent>
        <groupId>org.springframework.boot</groupId>
        <artifactId>spring-boot-starter-parent</artifactId>
        <version>2.1.5.RELEASE</version>
        <relativePath/> <!-- lookup parent from repository -->
    </parent>
    <artifactId>springboot-dubbo-seata</artifactId>
    <packaging>pom</packaging>
    <name>springboot-dubbo-seata</name>
    <groupId>io.seata</groupId>
    <version>1.0.0</version>
    <description>Demo project for Spring Cloud Alibaba Dubbo</description>

    <modules>
        <module>samples-common</module>
        <module>samples-account</module>
        <module>samples-order</module>
        <module>samples-storage</module>
        <module>samples-business</module>
    </modules>

    <properties>
        <springboot.verison>2.1.5.RELEASE</springboot.verison>
        <java.version>1.8</java.version>
        <druid.version>1.1.10</druid.version>
        <mybatis.version>1.3.2</mybatis.version>
        <mybatis-plus.version>2.3</mybatis-plus.version>
        <lombok.version>1.16.22</lombok.version>
        <dubbo.version>2.7.3</dubbo.version>
        <seata.version>0.9.0</seata.version>
        <netty.version>4.1.32.Final</netty.version>
    </properties>

    <dependencies>
        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-web</artifactId>
            <version>${springboot.verison}</version>
        </dependency>

        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter</artifactId>
            <version>${springboot.verison}</version>
        </dependency>

        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-starter-test</artifactId>
            <version>${springboot.verison}</version>
        </dependency>

        <dependency>
            <groupId>com.alibaba</groupId>
            <artifactId>druid</artifactId>
            <version>${druid.version}</version>
        </dependency>

        <dependency>
            <groupId>org.mybatis.spring.boot</groupId>
            <artifactId>mybatis-spring-boot-starter</artifactId>
            <version>${mybatis.version}</version>
        </dependency>

        <dependency>
            <groupId>com.baomidou</groupId>
            <artifactId>mybatis-plus</artifactId>
            <version>${mybatis-plus.version}</version>
        </dependency>

        <dependency>
            <groupId>org.apache.dubbo</groupId>
            <artifactId>dubbo</artifactId>
            <version>${dubbo.version}</version>
            <exclusions>
                <exclusion>
                    <artifactId>spring</artifactId>
                    <groupId>org.springframework</groupId>
                </exclusion>
            </exclusions>
        </dependency>
        <dependency>
            <groupId>org.apache.dubbo</groupId>
            <artifactId>dubbo-spring-boot-starter</artifactId>
            <version>${dubbo.version}</version>
        </dependency>

        <!-- https://mvnrepository.com/artifact/org.apache.dubbo/dubbo-config-spring -->
        <dependency>
            <groupId>org.apache.dubbo</groupId>
            <artifactId>dubbo-config-spring</artifactId>
            <version>${dubbo.version}</version>
        </dependency>
        <dependency>
            <groupId>org.apache.dubbo</groupId>
            <artifactId>dubbo-registry-zookeeper</artifactId>
            <version>${dubbo.version}</version>
        </dependency>

        <!-- https://mvnrepository.com/artifact/io.seata/seata-all -->
        <dependency>
            <groupId>io.seata</groupId>
            <artifactId>seata-all</artifactId>
            <version>${seata.version}</version>
        </dependency>


        <dependency>
            <groupId>org.apache.dubbo</groupId>
            <artifactId>dubbo-dependencies-zookeeper</artifactId>
            <version>${dubbo.version}</version>
            <type>pom</type>
        </dependency>
        <dependency>
            <groupId>org.apache.zookeeper</groupId>
            <artifactId>zookeeper</artifactId>
            <version>3.4.14</version>
        </dependency>

        <dependency>
            <groupId>org.apache.curator</groupId>
            <artifactId>curator-framework</artifactId>
            <version>4.0.1</version>
        </dependency>

        <!-- https://mvnrepository.com/artifact/com.101tec/zkclient -->
        <dependency>
            <groupId>com.101tec</groupId>
            <artifactId>zkclient</artifactId>
            <version>0.11</version>
        </dependency>

        <dependency>
            <groupId>org.springframework.boot</groupId>
            <artifactId>spring-boot-maven-plugin</artifactId>
            <version>${springboot.verison}</version>
        </dependency>
        <dependency>
            <groupId>org.projectlombok</groupId>
            <artifactId>lombok</artifactId>
            <version>${lombok.version}</version>
        </dependency>


        <dependency>
            <groupId>io.netty</groupId>
            <artifactId>netty-all</artifactId>
            <version>${netty.version}</version>
        </dependency>
        <dependency>
            <groupId>com.alibaba.spring</groupId>
            <artifactId>spring-context-support</artifactId>
            <version>1.0.2</version>
        </dependency>
        <dependency>
            <groupId>org.apache.httpcomponents</groupId>
            <artifactId>httpclient</artifactId>
            <version>4.5</version>
        </dependency>

        <dependency>
            <groupId>mysql</groupId>
            <artifactId>mysql-connector-java</artifactId>
            <version>5.1.47</version>
        </dependency>
    </dependencies>


    <build>
        <plugins>
            <plugin>
                <groupId>org.springframework.boot</groupId>
                <artifactId>spring-boot-maven-plugin</artifactId>
            </plugin>
            <plugin>
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-deploy-plugin</artifactId>
                <configuration>
                    <skip>true</skip>
                </configuration>
            </plugin>
            <plugin>
                <groupId>org.apache.maven.plugins</groupId>
                <artifactId>maven-compiler-plugin</artifactId>
                <configuration>
                    <source>${java.version}</source>
                    <target>${java.version}</target>
                </configuration>
            </plugin>
        </plugins>
    </build>
</project>

注意：

  • seata-all: 这个是seata 所需的主要依赖。
  • dubbo-spring-boot-starter: springboot dubbo的依赖。

其他的就不一一介绍，其他的一目了然，就知道是干什么的。

3.8.2 application.properties配置

server.port=8102
spring.application.name=dubbo-account-example

#====================================Dubbo config===============================================
dubbo.application.id= dubbo-account-example
dubbo.application.name= dubbo-account-example
dubbo.protocol.id=dubbo
dubbo.protocol.name=dubbo
dubbo.registry.id=dubbo-account-example-registry
dubbo.registry.address=zookeeper://127.0.0.1:2181
dubbo.protocol.port=20880
dubbo.application.qos-enable=false
dubbo.config-center.address=zookeeper://127.0.0.1:2181
dubbo.metadata-report.address=zookeeper://127.0.0.1:2181

#====================================mysql config============================================
spring.datasource.driver-class-name=com.mysql.jdbc.Driver
spring.datasource.url=jdbc:mysql://127.0.0.1:3306/seata?useSSL=false&useUnicode=true&characterEncoding=utf-8&allowMultiQueries=true
spring.datasource.username=root
spring.datasource.password=123456


#=====================================mybatis config======================================
mybatis.mapper-locations=classpath*:/mapper/*.xml

3.8.3 registry.conf（zk的配置）

registry.conf的配置
registry {
  # file 、nacos 、eureka、redis、zk
  type = "zk"

  nacos {
    serverAddr = "localhost"
    namespace = "public"
    cluster = "default"
  }
  eureka {
    serviceUrl = "http://localhost:1001/eureka"
    application = "default"
    weight = "1"
  }
  redis {
    serverAddr = "127.0.0.1:6379"
    db = "0"
  }
  zk {
    cluster = "default"
    serverAddr = "localhost:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }
  file {
    name = "file.conf"
  }
}

config {
  # file、nacos 、apollo、zk
  type = "zk"

  nacos {
    serverAddr = "localhost"
    namespace = "public"
    cluster = "default"
  }
  apollo {
    app.id = "fescar-server"
    apollo.meta = "http://192.168.1.204:8801"
  }
  zk {
    serverAddr = "127.0.0.1:2181"
    session.timeout = 6000
    connect.timeout = 2000
  }
  file {
    name = "file.conf"
  }
}

3.8.5 SeataAutoConfig 配置

package io.seata.samples.integration.account.config;

import com.alibaba.druid.pool.DruidDataSource;

import io.seata.rm.datasource.DataSourceProxy;
import io.seata.spring.annotation.GlobalTransactionScanner;
import org.apache.ibatis.session.SqlSessionFactory;
import org.apache.ibatis.transaction.jdbc.JdbcTransactionFactory;
import org.mybatis.spring.SqlSessionFactoryBean;
import org.springframework.beans.factory.annotation.Autowired;
import org.springframework.boot.autoconfigure.jdbc.DataSourceProperties;
import org.springframework.context.annotation.Bean;
import org.springframework.context.annotation.Configuration;
import org.springframework.context.annotation.Primary;
import org.springframework.core.io.support.PathMatchingResourcePatternResolver;

/**
 * @Author: llidong
 * @Description  seata global configuration
 * @Date Created in 2019/9/05 10:28
 */
@Configuration
public class SeataAutoConfig {

    /**
     * autowired datasource config
     */
    @Autowired
    private DataSourceProperties dataSourceProperties;

    /**
     * init durid datasource
     *
     * @Return: druidDataSource  datasource instance
     */
    @Bean
    @Primary
    public DruidDataSource druidDataSource(){
        DruidDataSource druidDataSource = new DruidDataSource();
        druidDataSource.setUrl(dataSourceProperties.getUrl());
        druidDataSource.setUsername(dataSourceProperties.getUsername());
        druidDataSource.setPassword(dataSourceProperties.getPassword());
        druidDataSource.setDriverClassName(dataSourceProperties.getDriverClassName());
        druidDataSource.setInitialSize(0);
        druidDataSource.setMaxActive(180);
        druidDataSource.setMaxWait(60000);
        druidDataSource.setMinIdle(0);
        druidDataSource.setValidationQuery("Select 1 from DUAL");
        druidDataSource.setTestOnBorrow(false);
        druidDataSource.setTestOnReturn(false);
        druidDataSource.setTestWhileIdle(true);
        druidDataSource.setTimeBetweenEvictionRunsMillis(60000);
        druidDataSource.setMinEvictableIdleTimeMillis(25200000);
        druidDataSource.setRemoveAbandoned(true);
        druidDataSource.setRemoveAbandonedTimeout(1800);
        druidDataSource.setLogAbandoned(true);
        return druidDataSource;
    }

    /**
     * init datasource proxy
     * @Param: druidDataSource  datasource bean instance
     * @Return: DataSourceProxy  datasource proxy
     */
    @Bean
    public DataSourceProxy dataSourceProxy(DruidDataSource druidDataSource){
        return new DataSourceProxy(druidDataSource);
    }

    /**
     * init mybatis sqlSessionFactory
     * @Param: dataSourceProxy  datasource proxy
     * @Return: DataSourceProxy  datasource proxy
     */
    @Bean
    public SqlSessionFactory sqlSessionFactory(DataSourceProxy dataSourceProxy) throws Exception {
        SqlSessionFactoryBean factoryBean = new SqlSessionFactoryBean();
        factoryBean.setDataSource(dataSourceProxy);
        factoryBean.setMapperLocations(new PathMatchingResourcePatternResolver()
                .getResources("classpath*:/mapper/*.xml"));
        return factoryBean.getObject();
    }

    /**
     * init global transaction scanner
     *
     * @Return: GlobalTransactionScanner
     */
    @Bean
    public GlobalTransactionScanner globalTransactionScanner(){
        return new GlobalTransactionScanner("account-gts-seata-example", "account-service-seata-service-group");
    }
}

其中:

@Bean
    public GlobalTransactionScanner globalTransactionScanner(){
        return new GlobalTransactionScanner("account-gts-seata-example", "account-service-seata-service-group");
    }

GlobalTransactionScanner: 初始化全局的事务扫描器

 /**
     * Instantiates a new Global transaction scanner.
     *
     * @param applicationId  the application id
     * @param txServiceGroup the default server group
     */
    public GlobalTransactionScanner(String applicationId, String txServiceGroup) {
        this(applicationId, txServiceGroup, DEFAULT_MODE);
    }
  • applicationId ：为应用id 这里我传入的是account-gts-seata-example
  • txServiceGroup: 默认server的分组 这里我传入的是account-service-seata-service-group 这个和我们前面在nacos 配置的是保存一致。
  • DEFAULT_MODE：默认的事务模式 为AT_MODE + MT_MODE

3.8.6 AccountExampleApplication 启动类的配置

package io.seata.samples.integration.account;

import org.apache.dubbo.config.spring.context.annotation.EnableDubbo;
import org.mybatis.spring.annotation.MapperScan;
import org.springframework.boot.SpringApplication;
import org.springframework.boot.autoconfigure.SpringBootApplication;
import org.springframework.boot.context.config.ConfigFileApplicationListener;

@SpringBootApplication(scanBasePackages = "io.seata.samples.integration.account")
@MapperScan({"io.seata.samples.integration.account.mapper"})
@EnableDubbo(scanBasePackages = "io.seata.samples.integration.account")
public class AccountExampleApplication {

    public static void main(String[] args) {
        SpringApplication.run(AccountExampleApplication.class, args);
    }

}

  • @EnableDubbo等同于 @DubboComponentScan和 @EnableDubboConfig组合

  • @DubboComponentScan 扫描 classpaths 下类中添加了 @Service 和 @Reference 将自动注入到spring beans中。

  • @EnableDubboConfig 扫描的dubbo的外部化配置。

4 启动所有的sample模块

启动 samples-account、samples-order、samples-storage、samples-business

并且在zk的客户端查看注册情况

在这里插入图片描述

我们可以看到上面的服务都已经注册成功。

5 测试

5. 1 发送一个下单请求

使用postman 发送 ：http://localhost:8104/business/dubbo/buy

参数：

{
    "userId":"1",
    "commodityCode":"C201901140001",
    "name":"fan",
    "count":50,
    "amount":"100"
}

返回

{
    "status": 200,
    "message": "成功",
    "data": null
}

这时候控制台：

2019-10-21 12:04:54.816  INFO 12780 --- [nio-8104-exec-1] i.s.s.i.c.controller.BusinessController  : 请求参数：BusinessDTO(userId=1, commodityCode=C201901140001, name=fan, count=50, amount=100)
2019-10-21 12:04:54.823  INFO 12780 --- [nio-8104-exec-1] i.s.common.loader.EnhancedServiceLoader  : load ContextCore[null] extension by class[io.seata.core.context.ThreadLocalContextCore]
2019-10-21 12:04:54.829 ERROR 12780 --- [nio-8104-exec-1] i.s.config.zk.ZookeeperConfiguration     : getConfig client.tm.commit.retry.count is error or timeout,return defaultValue 1
2019-10-21 12:04:54.830 ERROR 12780 --- [nio-8104-exec-1] i.s.config.zk.ZookeeperConfiguration     : getConfig client.tm.rollback.retry.count is error or timeout,return defaultValue 1
2019-10-21 12:04:54.833  INFO 12780 --- [nio-8104-exec-1] i.s.common.loader.EnhancedServiceLoader  : load TransactionManager[null] extension by class[io.seata.tm.DefaultTransactionManager]
2019-10-21 12:04:54.833  INFO 12780 --- [nio-8104-exec-1] io.seata.tm.TransactionManagerHolder     : TransactionManager Singleton io.seata.tm.DefaultTransactionManager@394cfa5a
2019-10-21 12:04:54.840  INFO 12780 --- [nio-8104-exec-1] i.s.common.loader.EnhancedServiceLoader  : load LoadBalance[null] extension by class[io.seata.discovery.loadbalance.RandomLoadBalance]
2019-10-21 12:04:55.037  INFO 12780 --- [nio-8104-exec-1] i.seata.tm.api.DefaultGlobalTransaction  : Begin new global transaction [192.168.10.108:8091:2025358030]
2019-10-21 12:04:57.473  INFO 12780 --- [nio-8104-exec-1] i.s.s.i.c.service.BusinessServiceImpl    : 开始全局事务，XID = 192.168.10.108:8091:2025358030
2019-10-21 12:05:04.280  INFO 12780 --- [nio-8104-exec-1] i.seata.tm.api.DefaultGlobalTransaction  : [192.168.10.108:8091:2025358030] commit status:Committed

事务提交成功，

我们来看一下数据库数据变化

t_account
在这里插入图片描述
t_order

在这里插入图片描述
t_storage

在这里插入图片描述
数据没有问题。

5.2 测试回滚

我们samples-business将BusinessServiceImpl的handleBusiness2 下面的代码去掉注释

if (!flag) {
  throw new RuntimeException("测试抛异常后，分布式事务回滚！");
}

使用postman 发送 ：http://localhost:8104/business/dubbo/buy2

.响应结果：

{
    "timestamp": "2019-09-05T04:29:34.178+0000",
    "status": 500,
    "error": "Internal Server Error",
    "message": "测试抛异常后，分布式事务回滚！",
    "path": "/business/dubbo/buy"
}

控制台

2019-10-21 12:05:46.752  INFO 12780 --- [nio-8104-exec-3] i.s.s.i.c.controller.BusinessController  : 请求参数：BusinessDTO(userId=1, commodityCode=C201901140001, name=fan, count=50, amount=100)
2019-10-21 12:05:46.785  INFO 12780 --- [nio-8104-exec-3] i.seata.tm.api.DefaultGlobalTransaction  : Begin new global transaction [192.168.10.108:8091:2025358056]
2019-10-21 12:05:46.786  INFO 12780 --- [nio-8104-exec-3] i.s.s.i.c.service.BusinessServiceImpl    : 开始全局事务，XID = 192.168.10.108:8091:2025358056
2019-10-21 12:05:50.285  INFO 12780 --- [nio-8104-exec-3] i.seata.tm.api.DefaultGlobalTransaction  : [192.168.10.108:8091:2025358056] rollback status:Rollbacked
2019-10-21 12:05:50.477 ERROR 12780 --- [nio-8104-exec-3] o.a.c.c.C.[.[.[/].[dispatcherServlet]    : Servlet.service() for servlet [dispatcherServlet] in context with path [] threw exception [Request processing failed; nested exception is java.lang.RuntimeException: 测试抛异常后，分布式事务回滚！] with root cause

java.lang.RuntimeException: 测试抛异常后，分布式事务回滚！
	at io.seata.samples.integration.call.service.BusinessServiceImpl.handleBusiness2(BusinessServiceImpl.java:93) ~[classes/:na]
	at io.seata.samples.integration.call.service.BusinessServiceImpl$$FastClassBySpringCGLIB$$2ab3d645.invoke(<generated>) ~[classes/:na]
	at org.springframework.cglib.proxy.MethodProxy.invoke(MethodProxy.java:218) ~[spring-core-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.aop.framework.CglibAopProxy$CglibMethodInvocation.invokeJoinpoint(CglibAopProxy.java:749) ~[spring-aop-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:163) ~[spring-aop-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at io.seata.spring.annotation.GlobalTransactionalInterceptor$1.execute(GlobalTransactionalInterceptor.java:104) ~[seata-all-0.9.0.jar:0.9.0]
	at io.seata.tm.api.TransactionalTemplate.execute(TransactionalTemplate.java:64) ~[seata-all-0.9.0.jar:0.9.0]
	at io.seata.spring.annotation.GlobalTransactionalInterceptor.handleGlobalTransaction(GlobalTransactionalInterceptor.java:101) ~[seata-all-0.9.0.jar:0.9.0]
	at io.seata.spring.annotation.GlobalTransactionalInterceptor.invoke(GlobalTransactionalInterceptor.java:76) ~[seata-all-0.9.0.jar:0.9.0]
	at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:186) ~[spring-aop-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.aop.framework.CglibAopProxy$DynamicAdvisedInterceptor.intercept(CglibAopProxy.java:688) ~[spring-aop-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at io.seata.samples.integration.call.service.BusinessServiceImpl$$EnhancerBySpringCGLIB$$a8aa15d5.handleBusiness2(<generated>) ~[classes/:na]
	at io.seata.samples.integration.call.controller.BusinessController.handleBusiness2(BusinessController.java:48) ~[classes/:na]
	at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) ~[na:1.8.0_144]
	at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:62) ~[na:1.8.0_144]
	at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43) ~[na:1.8.0_144]
	at java.lang.reflect.Method.invoke(Method.java:498) ~[na:1.8.0_144]
	at org.springframework.web.method.support.InvocableHandlerMethod.doInvoke(InvocableHandlerMethod.java:190) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.method.support.InvocableHandlerMethod.invokeForRequest(InvocableHandlerMethod.java:138) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.mvc.method.annotation.ServletInvocableHandlerMethod.invokeAndHandle(ServletInvocableHandlerMethod.java:104) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.invokeHandlerMethod(RequestMappingHandlerAdapter.java:892) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.mvc.method.annotation.RequestMappingHandlerAdapter.handleInternal(RequestMappingHandlerAdapter.java:797) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.mvc.method.AbstractHandlerMethodAdapter.handle(AbstractHandlerMethodAdapter.java:87) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:1039) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:942) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:1005) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.servlet.FrameworkServlet.doPost(FrameworkServlet.java:908) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at javax.servlet.http.HttpServlet.service(HttpServlet.java:660) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.springframework.web.servlet.FrameworkServlet.service(FrameworkServlet.java:882) ~[spring-webmvc-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at javax.servlet.http.HttpServlet.service(HttpServlet.java:741) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:231) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.tomcat.websocket.server.WsFilter.doFilter(WsFilter.java:53) ~[tomcat-embed-websocket-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:193) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.springframework.web.filter.RequestContextFilter.doFilterInternal(RequestContextFilter.java:99) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:193) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.springframework.web.filter.FormContentFilter.doFilterInternal(FormContentFilter.java:92) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:193) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.springframework.web.filter.HiddenHttpMethodFilter.doFilterInternal(HiddenHttpMethodFilter.java:93) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:193) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.springframework.web.filter.CharacterEncodingFilter.doFilterInternal(CharacterEncodingFilter.java:200) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:107) ~[spring-web-5.1.7.RELEASE.jar:5.1.7.RELEASE]
	at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:193) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:166) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:200) ~[tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:96) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:490) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:139) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:92) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:74) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:343) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.coyote.http11.Http11Processor.service(Http11Processor.java:408) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.coyote.AbstractProcessorLight.process(AbstractProcessorLight.java:66) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.coyote.AbstractProtocol$ConnectionHandler.process(AbstractProtocol.java:836) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.tomcat.util.net.NioEndpoint$SocketProcessor.doRun(NioEndpoint.java:1747) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at org.apache.tomcat.util.net.SocketProcessorBase.run(SocketProcessorBase.java:49) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1149) [na:1.8.0_144]
	at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:624) [na:1.8.0_144]
	at org.apache.tomcat.util.threads.TaskThread$WrappingRunnable.run(TaskThread.java:61) [tomcat-embed-core-9.0.19.jar:9.0.19]
	at java.lang.Thread.run(Thread.java:748) [na:1.8.0_144]

我们查看数据库数据，已经回滚，和上面的数据一致。

到这里一个简单的SpringBoot+Zookeeper+Seata实现Dubbo分布式事务管理案例基本就分析结束。感谢你的学习。

最后想一起交流技术的可以加我wx:
在这里插入图片描述

Logo
向您推荐>>Eolink开发者社区

权威｜前沿｜技术｜干货｜国内首个API全生命周期开发者社区

更多推荐

深入理解 Mocha 测试框架：从零实现一个 Mocha

前言什么是自动化测试自动化测试在很多团队中都是Devops环节中很难执行起来的一个环节，主要原因在于测试代码的编写工作很难抽象，99%的场景都需要和业务强绑定，而且写测试代码的编写工作量往往比编写实际业务代码的工作量更多。在一些很多业务场景中投入产出比很低，适合写自动化测试的应该是那些中长期业务以及一些诸如组件一样的基础库。自动化测试是个比较大的概念，其中分类也比较多，比如单元测试，端对端测试，集

avatar 云原生

ELK实现containerd的容器日志采集展示【基于logging的全栈监测】

企业级ELK Stack构建介绍

avatar 云原生

(20200916 Solved)docker-compose up创建容器自动退出

问题描述如题，创建容器后自动退出了。并且docker start container无效解决方案原因是缺失了控制终端的配置，需要在docker-compose.yml中增加tty:true ，有时候这样也不行，需要再增加一个command:/bin/bash，命令不一定是这个，需要是一个不会退出的命令，然后用-d后台启动容器。Referencesdocker-compose启动容器后自动退出...

avatar 云原生